| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix stack leak in bmp580 trigger handler
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack. |
| A flaw was found in rsyslog. An unauthenticated remote attacker can trigger a heap buffer overflow in the RainerScript `replace()` function by sending specially crafted syslog messages. This vulnerability arises from an incorrect buffer size calculation during string replacement, causing memory corruption. Successful exploitation can lead to a denial of service (DoS) for the affected system. |
| A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected. |
| A flaw was found in MRTG. When the MRTG daemon is started as a root user and subsequently drops privileges, a local, low-privileged attacker can exploit a symbolic link (symlink) following vulnerability. By influencing or pre-placing a symlink in the process ID (PID) file path, the attacker can trick the root process into changing the ownership of an arbitrary existing file to the daemon user. This can lead to local privilege escalation, allowing unauthorized access to or modification of sensitive files. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16550: fix stack leak in trigger handler
adis16550_trigger_handler() declares the scan data array on the stack
without initializing it. The memcpy() at the bottom fills only the
first 28 bytes (TEMP + 6 channels of GYRO/ACCEL data), and
iio_push_to_buffers_with_timestamp() writes the s64 timestamp at the
8-byte-aligned offset 32. Bytes 28-31 remain uninitialized stack data
which leaks to userspace on ever trigger.
Fix this all by just zero-initializing the structure on the stack. |
| The FV Flowplayer Video Player plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'fv_player_videos[_fv_player_user_video][]' parameter in all versions up to, and including, 7.5.55.7212 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires an administrator to have enabled the "Allow visitors to upload videos to their profile" (profile_videos_enable_bio) setting before Subscriber-level users can submit profile videos. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
The tagged FIFO path declares iio_buff on the stack with __aligned(8)
but no initializer, but there is a hole in the structure, which will
then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be
copied, but the space between that and the timestamp are not
initialized.
Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak
issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,
but for the tagged path it only added the alignment qualifier and not
the initializer :(
Fix this by just zero-initializing the structure on the stack. |
| A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP options, such as a malicious root-path, next-server, or bootfile name, to a system using dracut's NetworkManager-based initrd network module. These options are improperly handled and written into a temporary shell script without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs during system boot. |
| A flaw was found in dracut. The die() error-handling function writes its message into a shell script under the initramfs emergency-hook directory without properly shell-quoting it. When the message contains data derived from the DHCP ROOT_PATH option, an attacker on the adjacent network who controls a rogue DHCP server can inject a command-substitution sequence that executes as root the next time dracut sources its emergency hook scripts during standard boot-failure handling. |
| Omni C20 lacks proper certificate validation which could allow an attacker to perform a man-in-the-middle attack which could allow them to execute arbitrary code. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_select_path()
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| Mythic 3.2.16 through 3.4.0.61 contains a stored cross-site scripting vulnerability that allows attackers controlling target endpoint files to run JavaScript in the Mythic UI origin by planting HTML in .pdf-named files. When an operator downloads the file and clicks Preview Media, content-sniffed HTML from /direct/view renders same-origin, stealing localStorage JWTs for full GraphQL and REST access. |
| changelog.com before commit 7b35e829 contains a missing authorization vulnerability that allows unauthenticated attackers to read unpublished content via preview routes in PostController, NewsIssueController and NewsItemController. Attackers can enumerate hashid post IDs, sequential newsletter slugs and integer news IDs against preview endpoints to read draft posts, unsent newsletters and declined news items. |
| Axigen Mail Server WebMail before 10.6.39 and 10.7.1 contains a stored cross-site scripting vulnerability that allows unauthenticated remote attackers to inject script via unescaped sender display names in the conversation view. Attackers can send an email with HTML and script in the From display name that executes when the recipient opens the folder, enabling mailbox content theft or redirection. |
| sniproxy through 0.7.0 contains a NULL pointer dereference vulnerability in resolv_cancel() that allows remote unauthenticated attackers to crash the daemon by sending overlong hostnames. Attackers can send a 254 or 255 character TLS SNI name or HTTP Host header matching a wildcard backend, then close the connection to terminate the proxy. |
| Cross-Site Request Forgery (CSRF) vulnerability in WPExperts APIExperts Square for WooCommerce woosquare allows Cross Site Request Forgery.This issue affects APIExperts Square for WooCommerce: from n/a through 4.7.5. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.4, pypdf can enter an infinite loop when cloning or duplicating a crafted cyclic DictionaryObject. Clone traversal checked generated destination references rather than the original source references, allowing some source cycles to evade the visited-object check. This issue is fixed in version 6.21.4. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used BigInteger.prototype.modInverse(), bnModInverse(), lib/jsbn.js, RSA public exponent e to process the relevant input or security decision. node-forge's bundled jsbn implementation entered an infinite loop when BigInteger.prototype.modInverse() received a negative value or modulus. An attacker who could control the RSA public exponent passed to key generation, or a direct modInverse() operand, could block the Node.js event loop at full CPU. Parsed DER, PEM, JWK, PKCS#12, X.509, and TLS values are unsigned and cannot trigger this issue. This issue is fixed in version 1.4.1. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.5, binary REAL decoding builds a large mantissa one octet at a time by shifting a growing integer and slicing the remaining byte string. Attacker-controlled ASN.1 includes a binary-encoded REAL with a large mantissa and reaches BER, CER, or DER decode(), with or without a schema containing REAL. RealPayloadDecoder.valueDecoder repeatedly performs a left shift, OR, and suffix copy for every mantissa octet, making decode time quadratic in mantissa length. A comparatively small REAL value can hold a decoding worker on one CPU core for seconds or longer and cause availability loss. This issue is fixed in version 0.6.5. |
| MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, when CLIENT_SESSION_TRACK was negotiated, the OkPacket.parse() and OkPacket.parseWithInfo() paths allocated byte arrays using server-declared lengths for the OK packet info field and session-state variable names and values before confirming that the bytes remained in the packet. A malicious or compromised server, or a machine-in-the-middle attacker, could send a small OK packet declaring a much larger length and repeatedly force attacker-controlled heap allocations before the subsequent copy failed. This could create garbage-collection pressure or an OutOfMemoryError in the client application. This issue is fixed in versions 3.3.7, 3.4.5, and 3.5.11. |
