| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Initialize new folios before use
KMSAN reports an uninitialized value in longest_match_std(), invoked
from ntfs_compress_write(). When new folios are allocated without being
marked uptodate and ni_read_frame() is skipped because the caller expects
the frame to be completely overwritten, some reserved folios may remain
only partially filled, leaving the rest memory uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "arm64: zynqmp: Add an OP-TEE node to the device tree"
This reverts commit 06d22ed6b6635b17551f386b50bb5aaff9b75fbe.
OP-TEE logic in U-Boot automatically injects a reserved-memory
node along with optee firmware node to kernel device tree.
The injection logic is dependent on that there is no manually
defined optee node. Having the node in zynqmp.dtsi effectively
breaks OP-TEE's insertion of the reserved-memory node, causing
memory access violations during runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Initialize allocated memory before use
KMSAN reports: Multiple uninitialized values detected:
- KMSAN: uninit-value in ntfs_read_hdr (3)
- KMSAN: uninit-value in bcmp (3)
Memory is allocated by __getname(), which is a wrapper for
kmem_cache_alloc(). This memory is used before being properly
cleared. Change kmem_cache_alloc() to kmem_cache_zalloc() to
properly allocate and clear memory before use. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: rate: Unset parent pointer in devl_rate_nodes_destroy
The function devl_rate_nodes_destroy is documented to "Unset parent for
all rate objects". However, it was only calling the driver-specific
`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing
the parent's refcount, without actually setting the
`devlink_rate->parent` pointer to NULL.
This leaves a dangling pointer in the `devlink_rate` struct, which cause
refcount error in netdevsim[1] and mlx5[2]. In addition, this is
inconsistent with the behavior of `devlink_nl_rate_parent_node_set`,
where the parent pointer is correctly cleared.
This patch fixes the issue by explicitly setting `devlink_rate->parent`
to NULL after notifying the driver, thus fulfilling the function's
documented behavior for all rate objects.
[1]
repro steps:
echo 1 > /sys/bus/netdevsim/new_device
devlink dev eswitch set netdevsim/netdevsim1 mode switchdev
echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs
devlink port function rate add netdevsim/netdevsim1/test_node
devlink port function rate set netdevsim/netdevsim1/128 parent test_node
echo 1 > /sys/bus/netdevsim/del_device
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
__nsim_dev_port_del+0x6c/0x70 [netdevsim]
nsim_dev_reload_destroy+0x11c/0x140 [netdevsim]
nsim_drv_remove+0x2b/0xb0 [netdevsim]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x130
device_del+0x159/0x3c0
device_unregister+0x1a/0x60
del_device_store+0x111/0x170 [netdevsim]
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x55/0x10f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000
devlink port function rate add pci/0000:08:00.0/group1
devlink port function rate set pci/0000:08:00.0/32768 parent group1
modprobe -r mlx5_ib mlx5_fwctl mlx5_core
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core]
mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core]
mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core]
mlx5_sf_esw_event+0xc4/0x120 [mlx5_core]
notifier_call_chain+0x33/0xa0
blocking_notifier_call_chain+0x3b/0x50
mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core]
mlx5_eswitch_disable+0x63/0x90 [mlx5_core]
mlx5_unload+0x1d/0x170 [mlx5_core]
mlx5_uninit_one+0xa2/0x130 [mlx5_core]
remove_one+0x78/0xd0 [mlx5_core]
pci_device_remove+0x39/0xa0
device_release_driver_internal+0x194/0x1f0
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x53/0x1f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix oops due to uninitialised variable
Fix smb3_init_transform_rq() to initialise buffer to NULL before calling
netfs_alloc_folioq_buffer() as netfs assumes it can append to the buffer it
is given. Setting it to NULL means it should start a fresh buffer, but the
value is currently undefined. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
Have nvmet_req_init() and req->execute() complete failed commands.
Description of the problem:
nvmet_req_init() calls __nvmet_req_complete() internally upon failure,
e.g., unsupported opcode, which calls the "queue_response" callback,
this results in nvmet_pci_epf_queue_response() being called, which will
call nvmet_pci_epf_complete_iod() if data_len is 0 or if dma_dir is
different from DMA_TO_DEVICE. This results in a double completion as
nvmet_pci_epf_exec_iod_work() also calls nvmet_pci_epf_complete_iod()
when nvmet_req_init() fails.
Steps to reproduce:
On the host send a command with an unsupported opcode with nvme-cli,
For example the admin command "security receive"
$ sudo nvme security-recv /dev/nvme0n1 -n1 -x4096
This triggers a double completion as nvmet_req_init() fails and
nvmet_pci_epf_queue_response() is called, here iod->dma_dir is still
in the default state of "DMA_NONE" as set by default in
nvmet_pci_epf_alloc_iod(), so nvmet_pci_epf_complete_iod() is called.
Because nvmet_req_init() failed nvmet_pci_epf_complete_iod() is also
called in nvmet_pci_epf_exec_iod_work() leading to a double completion.
This not only sends two completions to the host but also corrupts the
state of the PCI NVMe target leading to kernel oops.
This patch lets nvmet_req_init() and req->execute() complete all failed
commands, and removes the double completion case in
nvmet_pci_epf_exec_iod_work() therefore fixing the edge cases where
double completions occurred. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: properly reset Rx ring descriptor
When device reset is triggered by feature changes such as toggling Rx
VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The
hardware descriptor ring may retain stale values from previous sessions.
And only set the length to 0 in rx_desc[0] would result in building
malformed SKBs. Fix it to ensure a clean slate after device reset.
[ 549.186435] [ C16] ------------[ cut here ]------------
[ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814!
[ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary)
[ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510
[ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8
[ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282
[ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2
[ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40
[ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e
[ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200
[ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2
[ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000
[ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0
[ 549.186505] [ C16] PKRU: 55555554
[ 549.186507] [ C16] Call Trace:
[ 549.186510] [ C16] <IRQ>
[ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186517] [ C16] __skb_pad+0xc7/0xf0
[ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx]
[ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx]
[ 549.186540] [ C16] __napi_poll+0x28/0x190
[ 549.186544] [ C16] net_rx_action+0x301/0x3f0
[ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50
[ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160
[ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0
[ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130
[ 549.186572] [ C16] common_interrupt+0xb8/0xd0
[ 549.186576] [ C16] </IRQ>
[ 549.186577] [ C16] <TASK>
[ 549.186579] [ C16] asm_common_interrupt+0x22/0x40
[ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246
[ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000
[ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3
[ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000
[ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40
[ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000
[ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420
[ 549.186605] [ C16] cpuidle_en
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix iteration of extrefs during log replay
At __inode_add_ref() when processing extrefs, if we jump into the next
label we have an undefined value of victim_name.len, since we haven't
initialized it before we did the goto. This results in an invalid memory
access in the next iteration of the loop since victim_name.len was not
initialized to the length of the name of the current extref.
Fix this by initializing victim_name.len with the current extref's name
length. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator
BPF programs may call next() and destroy() on BPF iterators even after new()
returns an error value (e.g. bpf_for_each() macro ignores error returns from
new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized
state after an error return causing bpf_iter_scx_dsq_next() to dereference
garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that
next() and destroy() become noops. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
Commit fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM") made the
initialization of the local memcache variable in user_mem_abort()
conditional, leaving a codepath where it is used uninitialized via
kvm_pgtable_stage2_map().
This can fail on any path that requires a stage-2 allocation
without transition via a permission fault or dirty logging.
Fix this by making sure that memcache is always valid. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result
If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command
the driver might at the least print garbage and at the worst
crash when the user runs the "devlink dev info" devlink command.
This happens because the stack variable fw_list is not 0
initialized which results in fw_list.num_fw_slots being a
garbage value from the stack. Then the driver tries to access
fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end
of the array.
Fix this by initializing the fw_list and by not failing
completely if the devcmd fails because other useful information
is printed via devlink dev info even if the devcmd fails. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error
It is possible that ctx in nfqnl_build_packet_message() could be used
before it is properly initialize, which is only initialized
by nfqnl_get_sk_secctx().
This patch corrects this problem by initializing the lsmctx to a safe
value when it is declared.
This is similar to the commit 35fcac7a7c25
("audit: Initialize lsmctx to avoid memory allocation error"). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix incorrect validation for num_aces field of smb_acl
parse_dcal() validate num_aces to allocate posix_ace_state_array.
if (num_aces > ULONG_MAX / sizeof(struct smb_ace *))
It is an incorrect validation that we can create an array of size ULONG_MAX.
smb_acl has ->size field to calculate actual number of aces in request buffer
size. Use this to check invalid num_aces. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/netfs/read_collect: add to next->prev_donated
If multiple subrequests donate data to the same "next" request
(depending on the subrequest completion order), each of them would
overwrite the `prev_donated` field, causing data corruption and a
BUG() crash ("Can't donate prior to front"). |
| In the Linux kernel, the following vulnerability has been resolved:
amdkfd: properly free gang_ctx_bo when failed to init user queue
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
The Call Trace is as below:
"
<TASK>
? show_regs.cold+0x1a/0x1f
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? __warn+0x84/0xd0
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? report_bug+0x105/0x180
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? __rxe_cleanup+0x124/0x170 [rdma_rxe]
rxe_destroy_qp.cold+0x24/0x29 [rdma_rxe]
ib_destroy_qp_user+0x118/0x190 [ib_core]
rdma_destroy_qp.cold+0x43/0x5e [rdma_cm]
rtrs_cq_qp_destroy.cold+0x1d/0x2b [rtrs_core]
rtrs_srv_close_work.cold+0x1b/0x31 [rtrs_server]
process_one_work+0x21d/0x3f0
worker_thread+0x4a/0x3c0
? process_one_work+0x3f0/0x3f0
kthread+0xf0/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
"
When too many rdma resources are allocated, rxe needs more time to
handle these rdma resources. Sometimes with the current timeout, rxe
can not release the rdma resources correctly.
Compared with other rdma drivers, a bigger timeout is used. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow! |
| In consul-mcp-server, versions 0.1.0 up to 0.1.3 did not restrict how the Consul backend address was supplied, allowing a connected client to override the server's configured Consul address via a request header. This may allow a malicious client to redirect the server's Consul API traffic to an attacker-controlled endpoint, potentially exfiltrating the Consul token configured on the server. This vulnerability, CVE-2026-16328, is fixed in consul-mcp-server 0.1.4. |
| Heimdall Data Database Proxy generateFileContent CRLF Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Heimdall Data Database Proxy. Authentication is required to exploit this vulnerability.
The specific flaw exists within the generateFileContent function. The issue results from the lack of proper neutralization of CRLF sequences. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29251. |
| Use of uninitialized resource in Microsoft Windows App Store allows an authorized attacker to disclose information locally. |
