| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: free the skb when the DLC has no owner
rfcomm_recv_data() hands the skb to d->data_ready() and returns 0
without freeing it, so the callback owns the skb from that point on.
The tty implementation frees it when the DLC has been detached from its
device:
static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc,
struct sk_buff *skb)
{
struct rfcomm_dev *dev = dlc->owner;
if (!dev) {
kfree_skb(skb);
return;
}
The socket implementation returns without freeing it, and the skb is
leaked.
A connected DLC can have no owner: rfcomm_sock_destruct() clears
d->owner, while the DLC itself stays on the session until it is closed.
Data frames that arrive in that window still find d->state ==
BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one
leaked skb each.
The leak does not stop on its own either. The remote runs out of
credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only
place that sets it is rfcomm_sk_data_ready() itself, below the return.
rfcomm_process_dlcs() keeps granting credits, so the remote keeps
sending and the leak keeps growing.
Free the skb, as the tty side does. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Free the BO cache size list on teardown
vc4_bo_cache_destroy() purges the cached BOs but never frees the size
list, leaking it on every unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Refactor registration
This refactors and simplifies the registration/unregistration flow. Since
we now only perform registration when the client isn't opened anymore, the
logic for handling that can be removed, and the rest of the function
streamlined.
We also remove the previous assumption that we have a serial number to show
we're registered, replacing it with a single purpose boolean.
In a previous refactor the code for unregistering a battery if later
registration steps failed was accidentally left out. As a result, a
lingering power_supply object could get left over after the steam object
was torn down. This is also fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: lpass-cpu: use DAI table index for playback constraints
The DAI ID is a hardware port ID and is not necessarily the index of
the corresponding entry in variant->dai_driver.
When configuring a DAI with LPAIF_I2SCTL_MODE_QUAD01, the probe code
currently uses dai_id to index variant->dai_driver. This is incorrect
for platforms where DAI IDs are sparse. For example, the IPQ806x MI2S
DAI has ID 4 while it is the only entry in the DAI driver table. If
that DAI is configured for QUAD01 and probe reaches this branch, the
code writes beyond that single entry via dai_driver[4] instead of
updating the DAI being processed.
Use the loop index i when updating the current DAI's playback channel
constraints, while retaining dai_id for indexing the hardware-port
specific playback SD-line mode array.
This fixes the incorrect DAI table access for platforms where the DAI
ID does not match its position in the driver table. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: bound LBLCR and LBLC cache growth
ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for
every previously unseen destination address. The table max_size only
tells the periodic collector to reclaim entries after the cache has
already exceeded the limit. It does not reclaim entries that the
attacker continues to use.
Reject new cache entries once either table reaches max_size * 3 / 2.
The extra headroom lets the periodic collector catch up while the
existing scheduler fallback continues to use the selected destination
when cache creation fails. New traffic therefore stays serviceable
without growing the tables further. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gso: limit recursive IP-in-IP segmentation
IP-in-IP GSO can re-enter inet_gso_segment() or ipv6_gso_segment()
for each nested IP header. encap_level tracks header bytes, not callback
depth, so a deep chain can exhaust the kernel stack. Making
inet_gso_segment() stackable introduced unbounded IPv4 nesting; IPIP
GSO/TSO later made the path reachable. The IPv6 stackable path was
introduced separately and uses the same guard.
Count IPv4 and IPv6 GSO handler entries in skb_gso_cb, initialized once
per top-level GSO operation and preserved across GRE/UDP context changes.
Use the existing IP_TUNNEL_RECURSION_LIMIT for both handlers. The first
five entries pass, and the sixth returns -EINVAL before dispatching
another GSO callback. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: reject oversized playback packets
Each playback URB is handed a slice of out.buffer that is exactly
LINE6_ISO_PACKETS * max_packet_size_out bytes, sized from the OUT
endpoint, but the number of bytes written into that slice is never
compared against it.
submit_audio_out_urb() takes the frame count from prev_fsize, which
audio_in_callback() derived from the *IN* endpoint's received packet
length, and rescales it with the playback frame size; when prev_fsize is
still zero it synthesizes a length from the sample rate instead. On a
device declaring a large IN wMaxPacketSize and a small OUT
wMaxPacketSize, the resulting memcpy(), or the memset() when the
playback stream is idle, runs past its slice and, as the reproducer
below shows, beyond the allocation.
usb_submit_urb() is not a backstop. max_packet_size_out comes from
usb_maxpacket(), which returns only the low 11 bits of wMaxPacketSize,
while USB core validates a high-speed isochronous length against that
base scaled by usb_endpoint_maxp_mult(). A length of up to three times
the allocated slice is therefore accepted, and even a rejected URB is
only rejected after the write.
Reject a packet that does not fit the slice the driver allocated for it.
Clamping it instead would silently shorten the capture-derived rate
feedback and desynchronize the two streams.
BUG: KASAN: slab-out-of-bounds in submit_audio_out_urb (sound/usb/line6/playback.c:229)
Write of size 1024 at addr ffff888100bbd400 by task kworker/1:2/5002
Workqueue: events line6_startup_work
Call Trace:
__asan_memcpy (mm/kasan/shadow.c:106)
submit_audio_out_urb (sound/usb/line6/playback.c:229)
line6_submit_audio_out_all_urbs (sound/usb/line6/playback.c:291)
line6_stream_start (sound/usb/line6/pcm.c:194)
line6_pcm_acquire (sound/usb/line6/pcm.c:337)
line6_startup_work (sound/usb/line6/driver.c:728)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address belongs to the object at ffff888100bbd400
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes inside of
allocated 256-byte region [ffff888100bbd400, ffff888100bbd500) |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: call _get_device() with the master MTD
__get_mtd_device() calls the master's _get_device() callback with mtd,
which may be a partition. __put_mtd_device() passes the master.
This breaks gluebi partitions because gluebi_get_device() uses
container_of() and therefore requires the master MTD. Pass the master
to _get_device(), matching _put_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
of/overlay: don't leak fragment references when changeset init fails
init_overlay_changeset() stores the number of initialized fragments
in ovcs->count only on full success. When find_target() or the
__symbols__ lookup fails partway through, the target and overlay
references taken for the fragments initialized so far are never
dropped: free_overlay_changeset() bounds its cleanup loop by
ovcs->count, which is still 0.
Store the running count on the error path so free_overlay_changeset()
puts whatever was set up. The store is guarded by ovcs->fragments
because on the allocation-failure path cnt still holds the counting
pass total while there is no fragments array; everywhere else cnt
only counts fully-initialized fragments. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wfx: validate MIB read length before copying to caller
wfx_hif_read_mib() copies reply->length bytes from the firmware
response into the caller-provided buffer without checking that
reply->length does not exceed val_len. A firmware response with
a length field larger than expected overruns the caller buffer and
reads past the end of the reply allocation.
Replace the dead -ENOMEM check with an active validation that
reply->length fits within val_len before the memcpy. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: reclaim an empty proto on the error path
Two racing tc filter add requests on the same chain/prio of an
unlocked classifier both run change() on the shared proto and both
can fail: the winner's tcf_chain_tp_delete_empty() attempt gives up
because the loser's handle is still in the idr, and the loser's
error path drops only its own reference without a second reclamation
attempt. The empty proto stays linked in the chain, holding the
chain reference, a block reference and the classifier module
reference until the chain or block is torn down.
Reclaim the proto on the error path of any failed request that holds
a proto reference. The reclamation is emptiness-gated:
tcf_chain_tp_delete_empty() unlinks the proto only when
delete_empty() admits it is empty, so a live shared proto is never
unlinked. A proto the request created is reclaimed unconditionally -
it is the only owner, so marking it for deletion is safe even without
a delete_empty callback. Classifiers without one (the check marks the
proto unconditionally) are rtnl-serialized, so the raced window this
guard closes cannot arise for them.
This is a follow-up to commit d4e359b3608a ("net/sched: cls_api: fix
teardown of an adopted proto on insert-race loss"), which stopped the
loser of the insert race from unlinking the winner's live proto but
left the empty-proto residual in place.
Conditions to recreate:
- CONFIG_NET_CLS_FLOWER=y; veth pair
- tc qdisc add dev veth0 ingress
- two concurrent `tc filter add dev veth0 ingress protocol ip pref 1
flower skip_sw ... action drop` (both fail in fl_hw_replace_filter
after publishing their handle in the idr); repeat in a loop
- an empty flower tp stays linked after both requests fail; visible
as a bare `filter protocol ip pref 1 flower chain 0` header in
`tc filter show` with no filter entries
- CAP_NET_ADMIN (namespace-local via unshare -Urn suffices) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: don't drain cmd_sync backlog on unregister
hci_unregister_dev() disables cmd_work and cmd_timer, then calls
hci_cmd_sync_clear(), whose cancel_work_sync() waits for
hci_cmd_sync_work() to return. That worker dequeues and runs every
entry on cmd_sync_work_list. With cmd_work disabled nothing reaches
the controller, so each queued HCI command waits the full
HCI_CMD_TIMEOUT (2s).
The backlog has no bound. Userspace can keep queuing MGMT commands
such as MGMT_OP_GET_CLOCK_INFO against a controller that doesn't
answer. Closing /dev/vhci then blocks in vhci_release() for
backlog * 2s:
INFO: task syz-executor:5749 blocked for more than 143 seconds.
cancel_work_sync
hci_cmd_sync_clear
hci_unregister_dev
vhci_release
In a local reproduction the backlog held more than 5000 entries,
which comes to hours of hang.
Stop the worker from taking new entries once HCI_UNREGISTER is set,
and wake any request still waiting with -ENODEV before cancelling
the work. The entries left over are destroyed with -ECANCELED by the
existing sweep in hci_cmd_sync_clear(). They stay on the list until
the work has stopped, so hci_cmd_sync_dequeue() and friends still see
them. A callback already running may still issue another command,
which delays unregister by at most one timeout per remaining command,
not by the whole backlog. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: fix firmware leak on teardown
The firmware requested in gfx_v6_0_init_microcode() is not released
when the GFX block is torn down, leaking the firmware resources.
Add gfx_v6_0_free_microcode() and call it from gfx_v6_0_sw_fini()
to release the PFP, ME, CE and RLC firmware.
(cherry picked from commit 386e81346f95ab0be5a82c5535de932e7a456924) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix IP instance memory leak on kobject add failure
amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with
kzalloc_flex() and initializes its embedded kobject before calling
kobject_add().
If kobject_add() fails, the return value is ignored and execution
continues without dropping the initial kobject reference. The failed
kobject is not retained in the kset list, so the normal sysfs teardown
path cannot find it. As a result, ip_hw_instance_release() is never
called and the ip_hw_instance allocation is leaked.
Call kobject_put() when kobject_add() fails so the initial reference is
dropped and ip_hw_instance_release() can free the allocation. Keep the
existing best-effort sysfs behavior by continuing with the remaining IP
entries after the failed registration.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
(cherry picked from commit 5c75fbcca8af1096d8d9415b91d8ea6212c22ee1) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix ACP MFD device leak on init failure
acp_hw_init() registers ACP child devices with mfd_add_devices() before
attaching them to the ACP power domain and initializing the hardware.
If attaching a child to the power domain fails, or if the ACP reset or
clock enable operation times out, the failure path frees only the
source cell, resource, and platform-data allocations. The child
platform devices already registered by mfd_add_devices() remain
registered and are never released.
Remove the children from the power domain and unregister the MFD
devices on failures that occur after mfd_add_devices() succeeds. Keep
mfd_add_devices() failures on the existing cleanup path since the MFD
core already rolls back partially registered children itself.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
(cherry picked from commit 63da68d6a2279ec945581c990c5a59a5ae8b5560) |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix leaked fd fixups on TF_UPDATE_TXN supersede
When a TF_UPDATE_TXN transaction supersedes a pending async transaction
in a frozen process, the outdated transaction is freed with kfree()
directly. This skips binder_free_txn_fixups(), leaking all
binder_txn_fd_fixup entries and their fget()'d struct file references.
The leaked file refcounts never reach zero, so the struct file objects
are permanently pinned in memory. They survive process exit and
accumulate across invocations until file-max exhaustion.
Every other transaction cleanup path (binder_free_transaction(),
binder_transaction() error paths, binder_release_work()) correctly
calls binder_free_txn_fixups(). Add the missing call before kfree()
in the t_outdated cleanup block. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd
generic_set_cmd() and generic_get_cmd() use the low nibble of
ctrl->bRequest as an index into con->data[]:
u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */
...
con->data[cmd] = value; /* OOB when cmd >= 5 */
struct usb_audio_control (include/linux/usb/audio.h) declares data as
a 5-element array, so indices 5 through 15 write (or read) up to 44
bytes past the end of the array on the heap.
A malicious USB host can craft a class-specific SET_CUR / GET_CUR
request with an arbitrary bRequest value, triggering the out-of-bounds
access from an IRQ completion handler with no further preconditions.
Add an ARRAY_SIZE() guard to both functions. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: vcc: zero-initialize control packet in vcc_send_ctl()
The stack-allocated struct vio_vcc pkt was partially initialized,
leaving the tag.stype_env field uninitialized before being sent via
ldc_write(), potentially leaking kernel stack data to the LDC peer. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ua101: reject mismatched capture/playback packet sizes
detect_usb_format() cross-checks bSubframeSize, bBitResolution and
tSamFreq between the capture and playback interfaces, but never relates
the two endpoints' wMaxPacketSize and bNrChannels. Each playback URB
gets a buffer of ua->playback.max_packet_bytes, while the number of
bytes written into it is derived from the capture stream:
capture_urb_complete() computes frames from the received capture packet
and capture.frame_bytes, and start_usb_playback() and playback_work()
multiply that by playback.frame_bytes.
A device declaring a large capture wMaxPacketSize with few capture
channels and a small playback wMaxPacketSize with many playback channels
therefore memset()s and memcpy()s past the end of the playback buffer,
in open() of the PCM node the driver registers during probe.
usb_submit_urb() rejects the over-long iso_frame_desc[0].length with
-EMSGSIZE, but only after the write.
Reject such descriptors at probe time. Genuine UA-101/UA-1000 hardware
declares proportional packet sizes and is unaffected.
BUG: KASAN: slab-out-of-bounds in start_usb_playback (sound/usb/misc/ua101.c:586)
Write of size 2048 at addr ffff8881098f3c00 by task exploit/5021
Call Trace:
__asan_memset (mm/kasan/shadow.c:84)
start_usb_playback (sound/usb/misc/ua101.c:586)
playback_pcm_open (sound/usb/misc/ua101.c:679)
snd_pcm_open_substream (sound/core/pcm_native.c:2829)
snd_pcm_open (sound/core/pcm_native.c:2865 sound/core/pcm_native.c:2932)
snd_pcm_playback_open (sound/core/pcm_native.c:2891)
snd_open (sound/core/sound.c:166)
chrdev_open (fs/char_dev.c:411)
do_dentry_open (fs/open.c:996)
vfs_open (fs/open.c:1101)
path_openat (fs/namei.c:4837 fs/namei.c:5000)
do_file_open (fs/namei.c:5029)
do_sys_openat2 (fs/open.c:1417)
__x64_sys_openat (fs/open.c:1423 fs/open.c:1439 fs/open.c:1434)
do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address belongs to the object at ffff8881098f3c00
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 0 bytes inside of
allocated 168-byte region [ffff8881098f3c00, ffff8881098f3ca8) |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: fix underflow in ANA log bounds checks
The number of ANA groups advertised through Identify Controller sizes the
ANA log buffer. The ANA log header and group descriptors independently
supply the number of groups and namespace IDs to parse.
Both bounds checks subtract an untrusted object size from ana_log_size
before comparing the current offset. If the object is larger than the
buffer, the size_t subtraction underflows and lets the parser read beyond
ana_log_buf.
Check the current offset before the first subtraction and compare each
object size with the remaining buffer instead. This rejects inconsistent
ANA data before dereferencing a truncated group descriptor or walking an
oversized namespace ID array. |
