| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject Write/Reply chunks with segcount 0
A peer can send a Write or Reply chunk whose segcount field is zero.
xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero
passes the range check, and xdr_inline_decode(stream, 0) returns the
current (non-NULL) cursor without advancing. The function returns
true and pcl_alloc_write() then links a struct svc_rdma_chunk with
ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl.
An earlier patch in this series made pcl_for_each_segment() safe for
ch_segcount == 0, so this no longer drives the memory walk it used
to. Rejecting the malformed frame at the decode boundary is still
worthwhile as defense in depth: it keeps degenerate zero-segment
chunks off the parsed chunk lists entirely, so any future consumer
that walks ch_segments directly cannot observe one, and it makes the
zero-floor easy to backport to trees where the macro change is more
intrusive. RFC 8166 has no meaning for a Write/Reply chunk that
describes no remote buffer, so no legitimate client is affected.
xdr_check_reply_chunk() funnels Reply chunks through
xdr_check_write_chunk() and inherits the same rejection.
pcl_alloc_write() also links each chunk onto the parsed chunk list
before filling its segment array. If a future change weakens the
segcount-0 rejection, an incomplete chunk is visible to consumers
during the fill loop. Reorder so that list_add_tail() follows the
segment fill loop, ensuring only fully-populated chunks appear on
the list. |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: fix cache shrink race with CPU hotplug
kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on
all online CPUs. Each callback moves objects belonging to the cache from
cpu_quarantine to the CPU's shrink_qlist, where they can later be freed
from task context.
kmem_cache_destroy() invokes the quarantine removal path while holding
cpus_read_lock(), but kmem_cache_shrink() does not. The latter can
therefore race with CPU offlining as follows:
kmem_cache_shrink() CPU hotplug
------------------- -----------
on_each_cpu()
CPU1 moves objects to
CPU1's shrink_qlist
on_each_cpu() returns
CPU1 goes offline
kasan_cpu_offline()
drains cpu_quarantine
leaves shrink_qlist untouched
for_each_online_cpu()
skips CPU1
The objects left on CPU1's shrink_qlist are not returned to the slab
allocator. This may prevent kmem_cache_shrink() from releasing slabs that
would otherwise become empty. If CPU1 remains offline, a later
kmem_cache_destroy() also skips the list and can report that the cache
still contains objects.
An intermittent occurrence was observed with a virtio-9p filesystem. The
mount and umount commands both returned 0, but the kernel logged the
following during the userspace-triggered teardown:
[ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown()
[ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376
[ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104
[ 2994.382591][ T111] p9_fcall_init+0x201/0x400
[ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700
[ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0
[ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50
[ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0
[ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360
[ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0
[ 2994.383910][ T111] vfs_statx+0xd7/0x170
[ 2994.384062][ T111] vfs_fstatat+0x45/0x80
[ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0
[ 2994.384386][ T111] do_syscall_64+0x115/0x6a0
[ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111
[ 2994.405655][ T111] Call Trace:
[ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0
[ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0
[ 2994.407210][ T111] v9fs_session_close+0x3c/0x260
[ 2994.407409][ T111] v9fs_kill_super+0x48/0x90
[ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160
[ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0
Thus, a successful umount left objects in the 9p fcall cache and prevented
the cache from being destroyed cleanly.
Per-CPU shrink_qlist storage exists for every possible CPU, and each list
is protected by its own raw spinlock. Iterate over possible CPUs so that
a list populated before its CPU went offline is drained as well.
for_each_possible_cpu() can do more work than for_each_online_cpu(), but
this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is
limited to cache shrink and cache destruction paths and does not affect
the normal allocation/free fast path. It adds one raw-spinlock-protected
scan of each possible CPU's shrink list. These lists are normally empty;
a non-empty list is traversed to remove objects belonging to the cache
being shrunk or destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix interlaced ztailpacking pclusters
On-disk sizes of interlaced pclusters should be block-aligned, and
ztailpacking interlaced pclusters should be invalid at all.
Currently, mkfs.erofs won't generate any interlaced pcluster with
ztailpacking enabled, so this doesn't affect any existing valid
filesystems.
However, crafted images can contain invalid interlaced ztailpacking
pclusters, resulting in an out-of-bounds read from a kmap'd page and
copying irrelevant kernel memory into userspace-visible page cache. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: fix reading neigh ha
Currently arp/neigh_reduce read neigh ha directly which can lead to
partial reads while the neigh is being updated. Use neigh_ha_snapshot to
take a stable snapshot of the address similar to route_shortcircuit which
already does the right thing. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_midi: initialize work in f_midi_alloc()
f_midi_alloc initializes free_ref to 1 and it can only be incremented
when a sound card is registered via f_midi_register_card().
f_midi_register_card() is only called in f_midi_bind() which actually
performs INIT_WORK. If f_midi_bind() is never run, work is not
initialized and the if condition in f_midi_free becomes true,
this results in a warning later in __flush_work as work->func = 0.
Fix this by moving INIT_WORK from f_midi_bind() to f_midi_alloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Service local TLB flushes on failed nested VM-Enter
KVM services local TLB flushes on "full" nested VM-Exits (through
__nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to
failed VMCS checks in nested_vmx_enter_non_root_mode()).
However, it is possible that KVM had queued TLB flushes that need to be
performed, even if the nested VM-Enter was not successful. For example,
if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if
via the MSR load lists, as the SDM says:
If any MSR is being loaded in such a way that would architecturally
require a TLB flush, the TLBs are updated so that, after VM entry, the
logical processor will not use any translations that were cached before
the transition.
The SDM is unclear about when the TLB flush should occur, and whether or
not a failed VM entry would flush the TLB, so it is safer to always
do the TLB flush in this case.
More concretely, KVM also updates the last VPID L1 used for L2 in
nested_vmx_transition_tlb_flush() (i.e. last_vpid), even if the VM entry
ultimately fails. With the current code, KVM could miss a TLB flush if
L1 changes L2's VPID, then does a failed VM entry followed by a
successful one, as the failed VM entry would update last_vpid but not
actually flush the TLB. Servicing local TLB flushes on failed VM entries
makes sure that the TLB is always flushed when last_vpid is updated. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix cred UAF caused by begin_current_label_crit_section()
AppArmor's begin_current_label_crit_section() is a scary function called
from lots of LSM hooks (in particular VFS/socket-related ones) that checks
if the label referenced by the current creds is marked FLAG_STALE, and if
so, attempts to use aa_replace_current_label() to replace the creds with an
updated version that uses a new label.
The first problem with this is that it would directly lead to UAF of
`struct cred` if anything in the kernel takes a pointer to the current
creds and accesses these past a security hook invocation that replaces
creds, like so:
```
const struct cred *cred = current_cred();
alloc_file_pseudo(...);
uid_t uid = cred->euid;
```
I don't know if anything in the kernel actually does this, but I think it
is very surprising that this pattern could lead to UAF.
The second problem is that things go wrong when aa_replace_current_label()
runs with overridden credentials. aa_replace_current_label() bails out if
`current_cred() != current_real_cred()` (mirroring the check in
proc_pid_attr_write()), but this check can't actually reliably detect
overridden credentials because the overridden creds can be the same as the
objective creds.
So in approximately the following scenario, things go wrong:
1. task begins with <creds A> (as both objective and subjective creds),
with refcount=2
2. task grabs an extra reference on <creds A> for overriding
3. task calls override_creds(<creds A>), which returns a pointer to the old
subjective creds (<creds A>)
4. task enters AppArmor LSM hook
5. AppArmor checks that objective/subjective creds are equal
6. AppArmor replaces both cred pointers with <creds B> and drops 2 refs on
<creds A>
7. task leaves AppArmor LSM hook
8. task calls revert_creds(<creds A>)
9. now task->cred is <creds A> while task->real_cred is <creds B>, but the
task_struct logically holds two references to <creds B>
10. another task drops the extra reference on <creds A> that was used for
overriding, refcount drops to 0
11. now task->real_cred points to freed creds
At this point, any access to current_cred() will be UAF.
I have a test case where I run aa-disable on a profile while a process
using that profile is blocked on splice() from a FUSE passthrough file into
a full pipe; after the profile update, the pipe becomes empty, splice()
resumes, the credentials go out of sync, and a subsequent getuid() syscall
results in a KASAN UAF splat.
To fix this, instead of directly replacing creds, do it via task_work that
will run at the end of the current syscall. (The point in time at which the
cred replacement happens should have no correctness impact; it is just a
performance optimization to avoid unnecessarily touching the refcount of
the new label.)
Note that AppArmor still performs direct cred replacements in the
sb_pivotroot LSM hook after this change, and that direct cred replacements
can still happen in VFS ->write() callbacks via proc_pid_attr_write().
There are two options for what to do with aa_dup_task_ctx(): Either
explicitly reset new->label_replacement_pending after the entire
aa_task_ctx has been copied, or switch to manually copying members over.
I am switching to manually copying members over because that should make
bugs more obvious. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: fix infinite loop in fwnode_for_each_child_node()
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL
│ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1
│
│ fwnode_get_next_child_node(FWa, FWb1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1
└────┘
This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly
output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}.
The root cause is that when the current child (FWb1) belongs to the
secondary fwnode, calling get_next_child_node() on the parimary fwnode
incorrectly returns the first child (FWa1) again instead of NULL.
Fix this by dynamically checking the parent fwnode of the current child
before calling get_next_child_node(). This approach follows the pattern
established in commit b5b41ab6b0c1 ("device property: Check
fwnode->secondary in fwnode_graph_get_next_endpoint()"). |
| In the Linux kernel, the following vulnerability has been resolved:
serial: imx: serialize imx_uart_ports[] lifetime
imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.
A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.
Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addition and removal together with their table updates so sibling
operations cannot interleave. Reject an occupied slot rather than
clobbering an active port during a duplicate-line probe. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or work item that is pending or
running at either point dereferences the freed udc.
Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and
from the usb_add_gadget_udc() failure path in probe; the remaining probe
error paths fail before the timer is armed. timer_shutdown_sync() waits
for a running callback and clears timer->function, which makes the work
handler's mod_timer() a permanent no-op; cancel_work_sync() then drains
any pending or running work whose re-arm attempt now does nothing. The
timer must be shut down first, since cancelling the work alone would let
the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and
work_struct are never initialized.
This does not require a fault; a normal driver unbind can interleave with
an already queued work item.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in read_block_state()
read_block_state() calculates nr_pages before taking dev_lock. If the
device is reset and reinitialized with a smaller disksize before lock
acquisition, nr_pages still describes the old table. The subsequent loop
can then call slot_lock() past the end of the newly allocated table.
Read disksize after acquiring dev_lock and checking that the device is
initialized. The read lock then keeps the table and its bound stable for
the duration of the scan. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix fcache_disposal UAF by inlining dispose state into nfsd_net
nfsd_file_dispose_list_delayed() defers fput() to nfsd service threads
via a per-net freeme queue, preventing the shrinker and GC worker from
bearing the cost of closing files (see ffb402596147). However, the
queue lives in a separately-allocated struct nfsd_fcache_disposal that
is freed by nfsd_free_fcache_disposal_net() during per-net teardown.
The global shrinker, laundrette, and fsnotify callbacks can still be
inside nfsd_file_dispose_list_delayed() dereferencing that pointer,
causing a use-after-free.
Inline the spinlock and freeme list directly into struct nfsd_net (as
fcache_dispose_lock and fcache_dispose_list), eliminating the separately
allocated struct nfsd_fcache_disposal entirely. These fields now have
the same lifetime as the net namespace itself, so there is no dangling
pointer to chase.
nfsd_file_cache_start_net() now just initializes the inline fields and
cannot fail due to allocation. nfsd_file_cache_shutdown_net() drains
the inline list directly instead of freeing a separate struct. The
alloc/free helpers are removed. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix stale s2s_cp_stateids IDR entry for async COPY
For an async COPY, nfsd4_copy() called nfs4_init_copy_state() before
dup_copy_fields(), so the s2s_cp_stateids IDR was pointed at
&u->copy->cp_stateid -- memory in the per-rqstp COMPOUND buffer that is
reused by the next request. dup_copy_fields() copies only the value into
async_copy, so the IDR slot dangled at the transient buffer for the whole
background copy. Any IDR walker then dereferences reused request memory:
the laundromat reads cs_type from it and, if the bytes look like an
expired NFS4_COPYNOTIFY_STID, follows into
refcount_dec()/idr_remove()/kfree() on garbage; manage_cpntf_state() has
the same exposure via idr_find().
Duplicate the fields first, then register the stateid on the stable
async_copy. result->cb_stateid is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during delegation revoke
A delegation stateid holds only a bare pointer to its owning
nfs4_client and does not keep it alive. The client survives its
stateids only because __destroy_client() drains cl_delegations and
cl_revoked before free_client() runs.
nfs4_laundromat() breaks that invariant: it unhashes an
expired delegation from cl_delegations, drops deleg_lock, then
revoke_delegation() relinks it onto cl_revoked under cl_lock. In that
window the delegation is on neither list, so client_has_state() can
report no remaining state.
Every teardown path first requires cl_rpc_users to be zero, but
the laundromat holds no such reference. A client whose recalled
delegation has just timed out can therefore reach free_client()
while revoke_delegation() is still about to dereference cl_lock,
a use-after-free.
Pin the client with cl_rpc_users across the revoke so teardown blocks
until it completes, then reap the delegation from cl_revoked. A client
already expiring reaps its own, so skip it and leave the delegation on
del_recall_lru. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph_cap_reclaim_work() re-queues itself for as long as
ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease
walk exhausts its `nr_to_scan` budget. This creates a busy loop that
consumes CPU without making any progress when there is nothing to
reclaim: with no cap pressure (`count==0`) and every scanned lease
still valid, each pass runs the full scan budget down to zero and
returns `-EAGAIN`, only to be queued again immediately.
The dir-lease walk made this worse. When `expire_dir_lease` is
`false` (i.e. we have no intention of reclaiming dir leases),
__dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH`
moves the dentry to the tail of the list and resets `di->time` via
__dentry_dir_lease_touch(), so a walk over N valid leases pointlessly
rewrote the list, refreshed the timestamps (preventing them from ever
aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN`
requeue.
Fix this in three steps:
- Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is
`false`. If we are not going to reclaim the lease, leave it in
place instead of churning the list and resetting its timestamp; the
walk then terminates naturally (or via `STOP` at the first fresh
lease).
- Only return `-EAGAIN` from the first (dentry-lease) walk when something
was actually freed. A full batch that frees nothing means retrying
the same list immediately is futile; fall through to the dir-lease
walk instead.
- After both walks, bail out with success (0) when nothing was freed
and there is no cap pressure (`count==0`). There is no reason to
keep retrying when we are not over the cap limit and made no
progress.
Under real cap pressure (`count>0`) the reclaim path is unchanged and
still retries via `-EAGAIN`.
Without this patch, I saw 500 ceph_trim_dentries() calls per second on
our web servers. This is very visible in `/proc/lock_stat` (5 minute
capture):
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00
-----------------------
&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
&mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
-----------------------
&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
With this patch:
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27
-----------------------
&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 1
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes
mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in
mcp->rxbuf for the duration of a transfer but never clears it when the
transfer finishes or times out. Once the caller frees or reuses the
buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious
MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to
memcpy device data into the freed memory, causing a write
use-after-free.
Route all return paths through a single exit point that clears
mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard
in the raw_event handler can reject any report arriving after the
transfer has ended. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Fix lost inode updates for IS_SYNC inodes
ext2_setsize() and ext2_xattr_set2() had a construct like:
if (IS_SYNC(inode)) {
sync_inode_metadata(inode, 1);
} else {
mark_inode_dirty(inode);
}
which leads to lost inode updates for IS_SYNC inodes because
sync_inode_metadata() does anything only if the inode is already dirty
and hence inode updates may be simply lost. Fix the problem by
unconditionally marking the inode dirty and *then* call
sync_inode_metadata(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: ssd1307fb: defer I2C transfers from damage callbacks
The fbdev damage callbacks may run from fbcon while printk has disabled
preemption. They currently update the display synchronously, which enters
the sleeping I2C transfer path from atomic context.
A complete report from an RK3566 system follows:
[ 258.129004] watchdog: watchdog0: watchdog did not stop!
[ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003
[ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2
spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem
videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2
stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio
stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables
x_tables autofs4
[ 258.129215] Preemption disabled at:
[ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340
[ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C
6.6.0-rc5-rockchip-rk356x #4
[ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT)
[ 258.129243] Call trace:
[ 258.129245] dump_backtrace+0xa0/0x128
[ 258.129252] show_stack+0x20/0x38
[ 258.129256] dump_stack_lvl+0x60/0xb0
[ 258.129265] dump_stack+0x18/0x28
[ 258.129269] __schedule_bug+0xa0/0xc8
[ 258.129274] __schedule+0x9ac/0xd30
[ 258.129279] schedule+0x60/0x100
[ 258.129282] schedule_timeout+0x194/0x338
[ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498
[ 258.129296] rk3x_i2c_xfer+0x20/0x60
[ 258.129300] __i2c_transfer+0x194/0x648
[ 258.129308] i2c_transfer+0x9c/0x130
[ 258.129313] i2c_transfer_buffer_flags+0x64/0x98
[ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb]
[ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb]
[ 258.129343] soft_cursor+0x13c/0x210
[ 258.129350] bit_cursor+0x2dc/0x550
[ 258.129354] fbcon_cursor+0xec/0x108
[ 258.129359] hide_cursor+0x44/0xc8
[ 258.129365] vt_console_print+0x398/0x3b0
[ 258.129370] console_flush_all.isra.0+0x17c/0x410
[ 258.129377] console_unlock+0x4c/0x100
[ 258.129382] vprintk_emit+0x1c8/0x340
[ 258.129386] vprintk_default+0x40/0x58
[ 258.129389] vprintk+0xb8/0xd0
[ 258.129392] _printk+0x68/0x98
[ 258.129398] watchdog_release+0x170/0x230
[ 258.129404] __fput+0xbc/0x288
[ 258.129409] __fput_sync+0x58/0x70
[ 258.129413] __arm64_sys_close+0x40/0x90
[ 258.129419] invoke_syscall+0x4c/0x118
[ 258.129426] el0_svc_common.constprop.0+0x48/0xf0
[ 258.129432] do_el0_svc+0x24/0x38
[ 258.129437] el0_svc+0x48/0x100
[ 258.129443] el0t_64_sync_handler+0xc0/0xc8
[ 258.129448] el0t_64_sync+0x190/0x198
[ 258.573087] ------------[ cut here ]------------
[ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count())
[ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871
preempt_count_sub+0x9c/0x148
[ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ip: orphan prefetched skbs before multicast forwarding
IPv4 and IPv6 input preserve an skb->sk association installed by
bpf_sk_assign() so that local delivery can use the selected socket under
RCU. Both address families can also prefetch a socket in UDP early demux.
In both paths (BPF and UDP early demux) a reference is not guaranteed to
be held on the socket.
When a multicast packet is not locally deliverable, IPv6 hands the
original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the
original skb when local delivery is not needed. Either path can put the
skb on an unresolved multicast route queue or forward it after the
receive-side RCU section ends.
After the prefetched socket is destroyed, a later skb free invokes
sock_pfree() and dereferences the stale skb->sk. Orphan the skb before
each non-local multicast forwarding path. Local delivery retains the
original skb; the existing skb_clone() calls provide multicast forwarding
with a socket-free clone. |
