| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: fix UAF in dma_buf_fd() tracepoint
Once FD_ADD() returns, the fd is live in the file descriptor table
and a thread sharing that table can close() it before DMA_BUF_TRACE()
runs. The close drops the last reference, __fput() frees the dma_buf,
and the tracepoint then dereferences dmabuf to take dmabuf->name_lock
-- slab-use-after-free.
Split FD_ADD() back into get_unused_fd_flags() + fd_install() and
emit the tracepoint between them. While the fdtable slot is reserved
with a NULL file pointer, a racing close() returns -EBADF without
entering __fput(), so the dma_buf stays alive across the trace. Same
approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put()
tracepoint").
This undoes the FD_ADD() conversion done in commit 34dfce523c90
("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to
hook the tracepoint safely. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: reset runtime state when cloning SAs
iptfs_clone_state() clones the IPTFS mode data with kmemdup(). This
copies runtime objects which must not be shared with the original SA,
including the embedded sk_buff_head, hrtimers, spinlock, and in-flight
reassembly/reorder state.
If xfrm_state_migrate() fails after clone_state() but before the later
init_state() call has reinitialized those fields, the cloned state can be
destroyed by xfrm_state_gc_task() with list and timer state copied from the
original SA. With queued packets this lets the clone splice and free skbs
owned by the original IPTFS queue, leading to use-after-free and
double-free reports in iptfs_destroy_state() and skb release paths.
Reinitialize the clone's runtime state before publishing it through
x->mode_data. Because clone_state() now publishes a destroyable mode_data
object before init_state(), take the mode callback module reference there.
Avoid taking it again from __iptfs_init_state() for the same object. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname
A reader in l2tp_session_get_by_ifname() can return a pointer to a
session whose refcount has reached zero. The getter takes its
reference with plain refcount_inc(), but every other session getter
in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the
corresponding _get_next variants) uses refcount_inc_not_zero()
because the IDR/RCU lookup can race with refcount_dec_and_test() ->
l2tp_session_free() -> kfree_rcu(). The ifname getter is the only
outlier; the inconsistency was raised on-list after 979c017803c4
("l2tp: use list_del_rcu in l2tp_session_unhash").
A reader inside rcu_read_lock_bh() that matches session->ifname can
be preempted between the strcmp() and the refcount_inc(). If the
last reference drops on another CPU in that window, the reader's
refcount_inc() runs on a counter that has reached zero. refcount_t
catches the addition-on-zero, prints "refcount_t: addition on 0;
use-after-free", saturates the counter, and returns the saturated
pointer to the caller. Session memory is held live by the in-flight
RCU read section, but the kfree_rcu() callback queued from
l2tp_session_free() will free it once the grace period closes; a
caller that dereferences the returned session past that point hits
a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU
sleeping lock and the preemption window is real; on stock PREEMPT
kernels local_bh_disable() is a preempt_count increment that closes
the cross-CPU race in practice (see below).
Use refcount_inc_not_zero() and continue the list walk on failure,
matching the other session getters in the file. The ifname getter
is the only session getter in net/l2tp/ that still uses the bare
refcount_inc() pattern; this change restores file-internal
consistency. The success path is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: omninet: fix memory corruption with small endpoint
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: fix use-after-free in error path
In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code
was using list_for_each_entry() to iterate through buffers while calling
iio_buffer_put() which can free the current buffer if refcount drops to 0.
The list_for_each_entry() loop macro then evaluates buf->head.next to
continue iteration, accessing the freed buffer.
Fix this by using list_for_each_entry_safe(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: itg3200: fix i2c read into the wrong stack location
itg3200_read_all_channels() takes `__be16 *buf' as a parameter and
fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the
parameter (a pointer), `&buf' is the address of the local pointer
slot on the stack of itg3200_read_all_channels(), not the address
of the caller's scan buffer. The (char *) cast hides the type
mismatch.
i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)
= 8 bytes into the parameter's stack slot, which is discarded when
the function returns. The caller's scan buffer in
itg3200_trigger_handler() is never written to, so
iio_push_to_buffers_with_timestamp() pushes uninitialised stack
contents to userspace via /dev/iio:deviceX every scan -- both a
functional bug (no actual gyroscope or temperature data is
delivered through the triggered buffer) and an information leak.
The non-buffered read_raw() path is unaffected: it goes through
itg3200_read_reg_s16() which uses `&out' on a local s16 value,
where that is correct.
Drop the spurious `&' so the i2c read writes into the caller's
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: xpad - fix out-of-bounds access for Share button
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: line-display: fix OOB read on zero-length message_store()
linedisp_display() unconditionally reads msg[count - 1] before
checking whether count is zero, so a write of zero bytes to the
message sysfs attribute hits msg[-1]:
write(fd, "", 0);
-> message_store(..., buf, count=0)
-> linedisp_display(linedisp, buf, count=0)
-> msg[count - 1] == '\n' ; OOB read
The kernfs write buffer for that store is a 1-byte allocation
(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),
so msg[-1] is a 1-byte read before the slab object. On a
KASAN-enabled kernel this trips an out-of-bounds report and
panics; on stock kernels it silently reads adjacent slab data
and, if that byte happens to be '\n', the following count--
wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().
linedisp_display() is reached from the message_store() sysfs
callback (drivers/auxdisplay/line-display.c message attribute,
mode 0644) and from the in-tree initial-message setup with
count == -1, so the OOB path is only userspace-triggerable via
zero-byte writes; vfs_write() does not short-circuit on
count == 0 and kernfs_fop_write_iter() dispatches the store
callback regardless.
Guard the trailing-newline trim with a count check. The
existing if (!count) block then takes the clear-display path
unchanged.
Affects every auxdisplay driver that registers via
linedisp_register() / linedisp_attach(): ht16k33, max6959,
img-ascii-lcd, seg-led-gpio. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to disclose information over a network. |
| Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| Apache bRPC versions before 1.18.0 do not consistently enforce the configured max_body_size limit in non-progressive HTTP/1 and HTTP/2 parsing and in memcache and couchbase response parsing.
A remote unauthenticated peer can cause an affected process to buffer message data beyond the configured limit, which may lead to memory exhaustion and denial of service.
Users should upgrade to 1.18.0 or apply the patch from PR https://github.com/apache/brpc/pull/3382 . The fix rejects oversized buffered HTTP bodies, returns HTTP 413 for HTTP/1 requests, resets oversized HTTP/2 streams, and rejects oversized memcache and couchbase responses from their declared lengths. Progressive HTTP reading remains supported because it uses bounded buffering. |
| The Redis protocol implementation in Apache bRPC allowed inline command parsing to allocate and copy the full connection buffer before a complete CRLF-terminated command was available. A remote attacker with access to a Redis-protocol bRPC service could send long inline inputs without a terminating CRLF to increase memory usage and CPU copy overhead, potentially causing denial of service.
Root Cause:
The Redis inline command parser allocated memory based on the current input buffer size and copied the entire buffer before determining the current inline command boundary. The existing redis_max_allocation_size limit was applied to RESP bulk strings and arrays, but not effectively to the inline command path before allocation.
Affected Scenarios:
Use Apache bRPC server with Redis protocol enabled and reachable by untrusted clients.
How to Fix:
1. Upgrade Apache bRPC to version 1.18.0, which fixes this issue.
2. Apply the patch from PR https://github.com/apache/brpc/pull/3363 .
Note:
The fix applies redis_max_allocation_size to Redis inline command lines and scans for CRLF before allocating parser arena memory. Inline command lines exceeding this limit are rejected. |
| The RTMP AMF parser in Apache bRPC accepts AMF string lengths and array counts directly from untrusted input. A remote unauthenticated attacker who can reach a bRPC server with RTMP enabled can send a small AMF payload with an excessive declared long string length or array count, causing excessive memory allocation or resource consumption before the parser rejects the incomplete payload.
Root Cause:
The AMF long string parser resized the destination string to the declared 32-bit length before validating that the stream contained that many bytes. ECMA array and strict array parsers also accepted 32-bit element counts without a configurable upper bound.
Affected Scenarios:
Deployments that enable the bRPC RTMP server component and accept RTMP traffic from untrusted clients. Direct uses of the AMF parser on untrusted data are also affected.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3353
Note:
The fix introduces configurable AMF parsing limits. The default maximum string size is 64 MiB and the default maximum array element count is 1,048,576. Payloads above these limits are rejected. The limits can be adjusted with amf_max_string_size and amf_max_array_size. |
| Uncontrolled recursion in the AMF parser in Apache bRPC < 1.18.0 allows a remote RTMP peer to crash a bRPC process by sending deeply nested AMF objects or arrays. The parser recursively processed nested AMF containers without enforcing a depth limit, which could exhaust the native stack.
Affected Scenarios:
Applications using bRPC RTMP support and parsing AMF data from an untrusted RTMP peer. This includes RTMP servers parsing client command messages, RTMP clients parsing server responses or status messages, and either side parsing inbound AMF script data such as metadata or cue points. Direct callers of ReadAMFObject or ReadAMFArray on untrusted input are also affected.
How to Fix:
1. Upgrade Apache bRPC to 1.18.0.
2. Apply the patch from PR https://github.com/apache/brpc/pull/3344 .
Note:
The fix introduces a configurable AMF nesting depth limit with default value 128. AMF objects or arrays deeper than amf_max_depth are rejected after applying the fix. |
| Uncontrolled recursion in the Redis reply parser in Apache bRPC < 1.18.0 allows a remote Redis server peer to crash a bRPC Redis client process by returning a deeply nested RESP array reply. The parser recursed once for each nested array level without enforcing a depth limit. The fix adds a configurable Redis reply depth limit with default value 128 and rejects replies exceeding that limit.
Affected Scenarios:
Applications using bRPC as a Redis client with ChannelOptions.protocol="redis" and receiving replies from an untrusted or faulty Redis server peer.
How to Fix:
1. Upgrade Apache bRPC to 1.18.0.
2. Apply the patch from PR https://github.com/apache/brpc/pull/3344 .
Note:
After applying the fix, Redis replies with array nesting deeper than redis_max_reply_depth are rejected. |
| Uncontrolled recursion in the HTTP/2 HPACK decoder in Apache bRPC before 1.18.0 allows remote attackers to cause denial of service by sending a crafted HTTP/2 header block containing many consecutive Dynamic Table Size Update entries. Each update was decoded by recursively invoking the HPACK decoder, which could exhaust the thread stack before a header field or end of input was reached.
Root Cause:
The bRPC HPACK decoder recursively decoded the next entry after processing a Dynamic Table Size Update. The decoder did not bound the recursion depth, so a long sequence of update entries could consume excessive stack space.
Affected Scenarios:
Use bRPC with the built-in HTTP/2 implementation to accept HTTP/2 traffic from an untrusted network.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3343
Note:
The fix changes HPACK Dynamic Table Size Update decoding to use iterative parsing instead of recursive parsing. |
| MONAI from 1.6.0 before 1.6.1 contains a remote code execution vulnerability in Auto3DSeg algo_from_json() that allows attackers to run Python code via a crafted work directory's algo_object.json. Attackers can ship a malicious algorithm_templates module plus a _target_ name that is imported and instantiated when victims call AutoRunner or import_bundle_algo_history, executing code under default configuration. |
| Use after free in Blink in Google Chrome prior to 156.0.8078.79 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| The WP Visitor Statistics (Real Time Traffic) WordPress plugin before 8.8 does not sanitize and escape tracking data derived from public visitor requests before storing it and outputting it in the administrative statistics dashboard, allowing unauthenticated attackers to inject arbitrary web scripts that execute when a logged-in administrator views the statistics pages. |
