| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix command skb lifetime during scan setup
During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the
address used for the PA_LINK lookup from hci_sent_cmd_data(). The
returned pointer borrows storage from sent_cmd or req_skb, without
holding a reference to either skb.
The scan worker runs on req_workqueue while hci_cmd_work() runs on the
separate device workqueue. After the scan worker loads sent_cmd, the
command worker can free and replace it before hci_sent_cmd_data()
dereferences the skb. The command payload can also be freed between
returning from the helper and comparing the address. The connection
lookup's RCU critical section does not protect the command skb.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_sent_cmd_data+0x27c/0x2f0
hci_le_set_scan_param_sync+0x43a/0x850
hci_passive_scan_sync+0xb09/0x1460
hci_update_passive_scan_sync+0x47c/0x6e0
hci_le_pa_create_sync+0x200/0xa70
hci_cmd_sync_work+0x13c/0x290
Allocated by task 95:
skb_clone+0x13f/0x340
hci_cmd_work+0x2a9/0x7e0
Freed by task 95:
kmem_cache_free+0xba/0x3a0
hci_cmd_work+0x29c/0x7e0
Use hdev->lock to serialize the address snapshot with sent_cmd
replacement. Protect req_skb replacement and completion cleanup with
the same lock because the helper falls back to that skb. Copy the
address before releasing the lock and use the copy for the existing
RCU-protected connection lookup. Release the mutex before sending or
waiting for commands, preserving the lookup and completion ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix use-after-free in dynamic port cleanup
ice_dealloc_dynamic_port() uses dyn_port->vsi->idx to erase the dynamic
port from pf->dyn_ports. However, it frees the VSI before reading the
index for the erase, resulting in a use-after-free.
Follow the reverse of the allocation order in ice_alloc_dynamic_port()
by erasing the xarray entry before freeing the VSI. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: do not inherit the Rx association on clone
sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into
every socket accepted from a listener without taking a reference, while
inet_sock_destruct() puts for every inet socket. psp_twsk_init() does
refcount_inc() for the timewait socket, so a child closing through
TIME_WAIT cancels its own put and leaves the association with one
reference and N timewait sockets holding the same pointer. Closing the
listener frees it, and the timewait timers then put freed memory.
Rejecting the association on a listening socket is not sufficient: a socket
can acquire one while established and then be turned back into a listener,
because tcp_disconnect() leaves sk->psp_assoc in place.
BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0
Write of size 4 at addr ffff888110f9255c by task swapper/7/0
psp_twsk_assoc_free+0x6f/0xf0
inet_twsk_put+0xda/0x1b0
call_timer_fn+0x53/0x2e0
__run_timers+0x764/0xa80
Freed by task 99:
kfree+0x1a7/0x500
process_one_work+0x7ec/0x1100
An association carries a per-connection SPI and key, so a child must not
inherit the parent's. Clear it on clone. |
| In the Linux kernel, the following vulnerability has been resolved:
pipe: preserve existing fasync readers on writer setup failure
F_SETFL and FIOASYNC decide whether to invoke ->fasync() before
pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can
therefore both enter the callback.
fasync_helper() allocates before checking for an existing entry. If the
first enable installs both entries, a second enable can update the
reader entry and then fail the allocation for the writer entry. The
error path removes the pre-existing reader entry, clearing FASYNC while
the writer entry remains registered. __fput() then skips ->fasync(), so a
later pipe notification can dereference the freed file or its f_owner.
An unprivileged memory-pressure reproducer triggers a KASAN
slab-use-after-free in send_sigio() through this path.
Keep the reader helper's result and undo the registration only if this
call added it. The pipe mutex serializes changes to both lists, so a
failed new registration still removes its reader, while a failed
duplicate preserves the existing registrations and FASYNC. Successful
duplicate enables continue to update fa_fd as before. |
| Wildfly's IIOP listener may permit deserialization of input streams before authentication is performed. An attacker who can gain access to the IIOP port may be able to construct and send malicious objects and achieve deserialization, if the target EJB allows untyped method parameters, and depending on the potential gadget chains available in the running classpath. |
| Monkeytype is a minimalistic and customizable typing test. Prior to 26.43.0, the .github/workflows/fix-formatting.yml workflow runs on pull_request_target with repository write permissions, checks out a fork pull request, installs dependencies from the fork's package.json, and invokes the fork-controlled oxfmt binary. Because actions/checkout persists the elevated GITHUB_TOKEN in Git configuration until after untrusted code executes, an external contributor whose pull request receives the format label can run arbitrary code, read or exfiltrate the token, and push repository content or modify pull requests and issues. The issue affects the repository CI workflow, not the Monkeytype application or user data. This issue is fixed in version 26.43.0. |
| A remote code execution (RCE) vulnerability was identified in the FlexNet Publisher lmadmin web user interface. This vulnerability is addressed in the FlexNet Publisher 2023 R2 (11.19.4.0) release. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure
rds_rdma_cm_event_handler_cmn() hands the return value of
rdma_resolve_route() straight back to the rdma_cm on
RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM
from the route work allocation, an SA query that cannot be set up, a
RoCE route with no usable device - makes addr_handler() destroy the
id the event was delivered on. That id is ic->i_cm_id, and nothing
clears the pointer: the connection sits in RDS_CONN_CONNECTING with a
freed id until its shutdown calls rdma_disconnect() and
rdma_destroy_id() on it.
The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect()
forces a zero return while ic->i_cm_id == cm_id, as the comment there
explains. Do the same here - drop the connection and return 0 - so
the id stays RDS's to destroy from the shutdown, and the reconnect
gets a fresh one. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: free the sbi after a grace period
If the "nocase" mount option ntfs3 uses custom hash and dentry compare
functions. Both access ntfs3 superblock private information in rcu
pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any
rcu delay. A lookup that's still inside the filesystem when the last
reference to the mount is dropped causes a UAF. With a pathwalk held up
in ntfs_d_hash() while the last reference to the mount goes away:
BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940
Read of size 8 at addr ff1100010453c850 by task walker/99
Call Trace:
<TASK>
ntfs_nls_to_utf16+0x752/0x940
ntfs_d_hash+0x22b/0x500
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 95:
__kmalloc_cache_noprof+0x249/0x560
ntfs_init_fs_context+0x2db/0x5a0
alloc_fs_context+0x52e/0xc70
[...]
Freed by task 98:
kfree+0x1db/0x5b0
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
task_work_run+0x131/0x250
The bug is currently masked by the grace period in namespace_unlock()
for umount(2). Keep the necessary information until the filesystem
private info is freed and free it with an rcu delay.
ntfs3_free_sbi() now runs from an rcu callback and drops the upcase
table via ntfs_put_shared(). So switch s_shared_lock over to
spin_lock_bh(). Otherwise the callback can deadlock against a task
holding the lock on the same cpu. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Free the eventfs_inode after an rcu grace period too
tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that
dentry->d_fsdata points to, and ->d_revalidate() is called in rcu
pathwalk mode with nothing but rcu_read_lock() held. The dentry itself
stays around for such a walker, but tracefs_d_release() drops its
reference to the eventfs_inode when the dentry is killed, and
release_ei() then frees it after a grace period of eventfs_srcu. An
SRCU grace period doesn't wait for rcu_read_lock() sections, so the
walker can read an eventfs_inode that is already gone.
With a pathwalk held up in tracefs_d_revalidate() while the dentry goes
away:
BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90
Read of size 1 at addr ff1100010152d8d0 by task walker/97
Call Trace:
<TASK>
tracefs_d_revalidate+0x76/0x90
lookup_fast+0x320/0x640
path_lookupat+0x160/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
Allocated by task 1:
__kmalloc_cache_noprof+0x249/0x560
eventfs_create_dir+0x7a/0x590
event_create_dir+0x2fb/0xcf0
trace_add_event_call+0xbf/0x150
[...]
Freed by task 11:
kfree+0x1db/0x5b0
srcu_invoke_callbacks+0x3a3/0x620
process_one_work+0x937/0x1810
worker_thread+0x4f1/0xd60
Before commit 8e556432477e ("eventfs: Use SRCU for freeing
eventfs_inodes") release_ei() used call_rcu(), which covered the walker,
while eventfs_iterate() needs the SRCU grace period. Wait for both and
chain call_rcu() from the SRCU callback. |
| This issue was addressed by enforcing library validation on the affected binaries. This issue is fixed in Xcode 27. An app may be able to break out of its sandbox. |
| This issue was addressed by enforcing library validation on the affected binaries. This issue is fixed in Xcode 27. A malicious app may be able to break out of its sandbox. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix unbound pool lifetime for pending pwqs
KASAN reports a use-after-free of an unbound worker_pool in
node_activate_pending_pwq():
BUG: KASAN: slab-use-after-free in _raw_spin_trylock+0x6d/0x120
Read of size 4 at addr ffff8880089ce000 by task kworker/u22:0/318
CPU: 1 UID: 0 PID: 318 Comm: kworker/u22:0 Not tainted 7.2.0 #1 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: 0x0 (flush-8:0)
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x610
kasan_report+0xce/0x100
_raw_spin_trylock+0x6d/0x120
pwq_dec_nr_in_flight+0x4b4/0xcb0
process_one_work+0x921/0x11a0
worker_thread+0x4d0/0xd20
kthread+0x2de/0x3c0
ret_from_fork+0x3aa/0x620
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 311:
alloc_pwq+0x439/0xca0
apply_wqattrs_prepare+0x75e/0xd10
apply_workqueue_attrs_locked+0x44/0xa0
wq_nice_store+0x350/0x450
Freed by task 0:
kfree+0x127/0x3b0
rcu_core+0x523/0x1780
handle_softirqs+0x1b3/0x610
Last potentially related work creation:
put_unbound_pool+0x3f3/0x7d0
pwq_release_workfn+0x494/0x8e0
kthread_worker_fn+0x1ff/0x790
Canceling the last inactive work skips pwq_dec_nr_active(), so an empty
pwq can remain on pending_pwqs when its refcnt reaches zero.
pwq_release_workfn() currently puts the pool before removing that pwq.
If this drops the last pool reference, the pool can be RCU-freed while
the pwq remains reachable, and node_activate_pending_pwq() may trylock
the freed pool->lock.
Remove the pwq from pending_pwqs before putting the pool. |
| A weakness has been identified in InternScience InternAgent 1.5.0. This affects the function train of the file tasks/AutoChem/code/experiment.py of the component LoRA Loading. This manipulation of the argument base_model_name_or_path causes inclusion of functionality from untrusted control sphere. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix use-after-free in __tcf_action_put()
__tcf_action_put() decrements the reference count before decrementing the
binding count. Another thread can free the action between these operations,
causing the binding-count update to access freed memory. KASAN reports it
as:
BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340
Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64
Hold the action IDR mutex across both counter updates and IDR removal,
keeping cleanup outside the lock. |
| Untrusted pointer dereference in Windows COM+ Event System Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: futex: untag the user pointer before the atomic access
access_ok() checks untagged_addr(uaddr), but arch_futex_atomic_op_inuser()
and futex_atomic_cmpxchg_inatomic() hand the raw uaddr to the inline asm
amoswap/amoadd/.../lr.w+sc.w through the "+m" (*uaddr) operand. When the
tagged address ABI is enabled (CONFIG_RISCV_ISA_SUPM, prctl
PR_SET_TAGGED_ADDR_CTRL with PMLEN != 0), those two addresses differ: a
user pointer whose top PMLEN bits hold a tag passes access_ok() after
untagging, but the atomic is then performed on the still-tagged raw
address.
Supervisor-mode data accesses are not subject to the U-mode pointer
masking (that is governed by menvcfg.PMM, which the kernel does not set),
so hardware does not strip the tag for the kernel's own access. With
Sv57 and PMLEN=16 the tag bits overlap the canonical-address bits, so a
tagged pointer can name a canonical kernel virtual address (e.g. in the
linear map) whose untagged form is a valid user address. An unprivileged
process can thus make FUTEX_WAKE_OP perform an atomic read-modify-write on
an arbitrary kernel address, with the matching FUTEX_OP_CMP_* result
serving as a read oracle.
get_user()/put_user()/raw_copy_{to,from}_user() already untag the pointer
after the access_ok() check; do the same in the futex helpers so the
atomic operates on the address that was actually validated. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: of: fill in supply names in of_regulator_bulk_get_all()
of_regulator_bulk_get_all() returns an array it allocated itself, and
fills in only the consumer of each entry. Every other way of getting a
bulk array has the supply name set, because the caller provides it, and
the core expects it to be there: regulator_bulk_enable() prints it when
a supply fails to enable, so a caller that hands such an array to it
dereferences uninitialised memory on that path.
Copy each name into the array's own allocation, right behind the
entries, so that it shares the array's lifetime and callers still have
nothing extra to free. That also retires the fixed 64 byte stack buffer
the names were assembled in, which is_supply_name() never bounded the
copy against. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: protect clcsock lifetime in smc_getname
smc_getname() dereferences smc->clcsock without holding
clcsock_release_lock. Link-group termination can release the CLC socket
through smc_close_active_abort() while the SMC socket is still open,
for example after shutdown(SHUT_WR).
A getsockname() caller can load smc->clcsock, then the termination worker
can clear the pointer and call sock_release() before the caller accesses
clcsock->ops or invokes getname(). This causes a use-after-free; if the
worker clears the pointer before the load, it causes a NULL dereference.
The syscall's file reference keeps the SMC socket alive but does not
prevent asynchronous release of its CLC socket.
KASAN reported the following with test-only timing instrumentation:
BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0
Read of size 8 at addr ffff888109abb4e0 by task poc/103
Call Trace:
smc_getname+0x19e/0x1b0
do_getsockname+0xe5/0x170
__sys_getsockname+0x8c/0x100
Allocated by task 95:
sock_alloc_inode+0x1e/0x280
sock_alloc+0x3d/0x240
__sock_create+0x7e/0x430
smc_create+0x121/0x240
Freed by task 0:
kmem_cache_free+0xcc/0x340
rcu_core+0x50a/0x1850
Last potentially related work creation:
evict+0x446/0x6c0
smc_clcsock_release+0xa8/0xd0
smc_close_active_abort+0x26a/0x3a0
__smc_lgr_terminate.part.0+0x137/0x2e0
Hold clcsock_release_lock across the pointer check and the getname()
callback to serialize with smc_clcsock_release(). Return -EBADF if the
CLC socket has already been released, preserving the existing peer
state check and the callback's return value otherwise. |
