| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: defer key slot crypto freeing to workqueue
Key slots are released through a kref and the existing release path
frees the AEAD transforms from an RCU callback. That is not safe for all
crypto implementations: crypto_free_aead can sleep, for example when an
async or hardware implementation has teardown work to complete.
Use queue_rcu_work for key-slot release. This keeps the RCU grace period
needed by lockless key-slot readers, but runs the actual crypto teardown
from workqueue context where sleeping is allowed. Once the rcu_work
callback runs, pre-existing RCU readers are gone, and the final kref put
already proves that no transform user remains, so the worker can release
the AEAD transforms and free the slot directly.
The previous patch drains ovpn_wq during module exit, so queued key-slot
teardown work cannot outlive module text. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 0.11.0 through 1.44.0, the OpenTracing bridge's bridgeSpan contains an unsynchronized extraBaggageItems map which can cause a panic. Because Go maps are not safe for concurrent read/write access, concurrent SetBaggageItem and correlation.MapFromContext calls on the same hooked bridgeSpan can trigger a fatal runtime error—such as concurrent map read and map write or concurrent map iteration and map write—terminating the process and causing denial of service. This issue is fixed in version 1.45.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: options: reset DSS fields in case of unexpected size
A remote peer could send a malformed DSS with a wrong size, followed by
another DSS or MPC + Data. In this case, the first suboption will be
ignored, but leaving some fields written, which could lead to
inconsistency or access uninitialized data.
Explicitly reset the fields that could have been modified in case of
unexpected size. |
| In specific scenarios involving multiple clients with different DNS resolver configurations, Reactor Netty may incorrectly reuse a previously configured DNS resolver.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix another iunlink infinite loop bug in online fsck
xrep_iunlink_resolve_bucket is supposed to reconstruct as much of the
incore prev and next unlinked list pointers based on what it finds on
disk and in memory before we move on to relinking the truly lost inodes
back into the unlinked list. However, it's still vulnerable to infinite
loops that come in via the next_unlinked pointers.
Fix this problem by remembering which inodes we've already seen and
checking new agino pointers against that. If a bit is already set,
either this is a loop or the inode has nonzero link count. We'll deal
with the second case in a subsequent patch. |
| GitHub CLI (gh) is GitHub's official command line tool. Versions 2.28.0 through 2.97.0 bind the local listener created by gh codespace ports forward to all available network interfaces by default. While port forwarding is active, a service in a Codespace can therefore become reachable through the user's non-loopback local IP addresses by other hosts that can route to the user's machine. This behavior does not change the GitHub-side visibility of the Codespaces port. Instead, it exposes the forwarded service through a wildcard-bound listener on the user's local machine, even when the source Codespaces port remains private. Exploitation requires a network-adjacent attacker to reach the victim's machine while forwarding is active. This issue is fixed in version 2.98.0. |
| Improper control of a resource through its lifetime in Workers in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions
The BPF verifier and the dynptr abstraction ensure that the memory space
referenced by a dynptr remains valid. They do not, however, provide any
guarantee that the contents of the memory are stable. kfuncs are
expected to remain memory-safe even if concurrent modifications occur.
bpf_get_fsverity_digest() didn't follow that: it could crash if
arg->digest_size was concurrently modified.
Fix that by using the known-good value hash_alg->digest_size instead.
Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return
type of __bpf_dynptr_size(). It doesn't appear that it can actually be
more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes
file-based pointers), but the correct type might as well be used. |
| OpenClaw (aka clawdbot or Moltbot) before 2026.1.29 obtains a gatewayUrl value from a query string and automatically makes a WebSocket connection without prompting, sending a token value. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: make error counter atomic
The error counter "v->corrupted_errs" was not atomic, thus it could be
subject to race conditions. The call to
dm_audit_log_target("max-corrupted-errors") may be skipped due to the
races. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: tegra: do not call pinctrl for GPIO direction
tegra_gpio_direction_input() and tegra_gpio_direction_output() already
program the GPIO controller direction registers directly. The additional
pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl
operation, because the Tegra pinmux ops provide GPIO request/free
handling but no gpio_set_direction hook.
The extra call still enters the pinctrl core and takes pctldev->mutex.
Shared GPIO users can call the direction path while holding their
per-line spinlock, so this otherwise redundant pinctrl direction call can
sleep in an atomic context.
This was found by our static analysis tool and then confirmed by manual
review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the
Tegra pinctrl ops. The reviewed path has a default non-sleeping
struct gpio_chip while the direction callback still enters the pinctrl
mutex path.
A directed runtime validation kept the same non-sleeping chip registration
and drove:
gpio_shared_proxy_direction_output()
gpiod_direction_output_raw_commit()
tegra_gpio_direction_output()
pinctrl_gpio_direction_output()
Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock
held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output()
on the stack.
Do not mark the whole chip as can_sleep to paper over this: can_sleep
describes whether get()/set() may sleep, and Tegra value access is MMIO.
Remove the redundant pinctrl direction calls and keep pinctrl involvement
in the existing request/free path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable BPF_LSM_CGROUP programs at load time
The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should
not attach any sleepable BPF programs there. Add support to the verifier
to explicitly reject attempts to load sleepable BPF programs destined
for LSM cgroup attachment.
Without this, we get the following splat from a BPF_LSM_CGROUP
program marked BPF_F_SLEEPABLE attached to file_open when it calls
bpf_get_dentry_xattr():
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load
preempt_count: 0, expected: 0
RCU nest depth: 2, expected: 0
Call Trace:
down_read+0x76/0x480
ext4_xattr_get+0x11f/0x700
__vfs_getxattr+0xf0/0x150
bpf_get_dentry_xattr+0xbb/0xf0
bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85
__cgroup_bpf_run_lsm_current+0x326/0x840
bpf_trampoline_6442534646+0x62/0x14d
security_file_open+0x34/0x60
do_dentry_open+0x340/0x1260
vfs_open+0x7a/0x440
path_openat+0x1bac/0x30a0
libbpf provides a .s named section variant for every sleepable
program type except lsm_cgroup, reflecting that per-cgroup LSM programs
are intended to only run in a non-sleepable context.
The above splat was obtained by bypassing libbpf by using bpf(2)
directly. |
| A memory corruption vulnerability was addressed with improved locking. This issue is fixed in Safari 26.6.1, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| In Spring AI's Semantic Cache support, the context hash used to isolate cached responses between different system prompts could allow cached responses to be shared across unrelated contexts.
Affected versions:
Spring AI: 2.0.0 |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6. Visiting a website may lead to an app denial-of-service. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.
This vulnerability is due to an error in the binder module initialization logic of the Snort Detection Engine. An attacker could exploit this vulnerability by sending certain packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine restarts unexpectedly. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix potential use-after-free in audit_del_rule()
`audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()`
before unlinking the rule from RCU-visible filter lists and waiting for a
grace period. Concurrent readers in `audit_filter()` and
`audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify
mark can be freed on an independent lifetime path. This creates a
use-after-free window during rule deletion.
Fix this by unlinking the rule from the RCU-visible lists and invoking
`synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other
rule removal helpers). This ensures that all existing RCU readers have
exited the critical section before any underlying resources are destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Validate length for CCA AES cipher key requests
cca_cipher2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument. |
| An elevation of privilege vulnerability exists when the Windows Print Spooler service improperly allows arbitrary writing to the file system. An attacker who successfully exploited this vulnerability could run arbitrary code with elevated system privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
To exploit this vulnerability, an attacker would have to log on to an affected system and run a specially crafted script or application.
The update addresses the vulnerability by correcting how the Windows Print Spooler Component writes to the file system. |
