| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
watch_queue: Fix note pool publication race in watch_queue_set_size()
There is a race between watch_queue_set_size() and post_one_notification().
watch_queue_set_size() publishes wqueue->notes, notes_bitmap, nr_pages and
nr_notes with plain stores, and post_one_notification() reads them with
plain loads under a different lock, so nothing orders the four stores
against the poster's loads: depending on the build, notes can be stored
last (gcc 14 on x86-64 does this). Since keyctl_watch_key() lets a watch
attach to a queue before it is sized, post_one_notification() can already
be running on another CPU at that moment: it reads nr_notes > 0, passes
its bounds check, and then reads notes while it is still NULL,
dereferencing notes[0].
An unprivileged user triggers this reliably by watching one of its own
keys through a notification pipe and racing ioctl(IOC_WATCH_QUEUE_SET_SIZE)
on that pipe against keyctl(KEYCTL_SETPERM) on the key from another CPU,
triggering:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:post_one_notification.isra.0+0xa2/0x1e0
Call Trace:
__post_watch_notification+0x148/0x180
keyctl_setperm_key+0x119/0x130
do_syscall_64+0x108/0x4c0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by publishing nr_notes last with smp_store_release(), and by
reading it once with smp_load_acquire() in post_one_notification() before
the bitmap and the page array are touched. A poster that observes a
non-zero nr_notes then also observes the pool behind it; one that observes
zero drops the notification as before. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry
Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails
in the "not from VM-Entry" case, i.e. when emulating RSM or handling
KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM
trying to run L1 with a nested MMU, and is especially problematic if the
vCPU manages to free its nested state before the VM crashes. Constructing
the root for a nested EPT MMU goes through vmcs12, which is dynamically
allocated/freed when nVMX is enabled/disabled. And so if the nested state
is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL
pointer deref when attempting to get L1=>L2 EPTP.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
Call Trace:
<TASK>
kvm_mmu_load+0xcd/0x870 [kvm]
kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x9c/0x4d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47491b
</TASK>
Modules linked in: kvm_intel kvm irqbypass
CR2: 0000000000000078
---[ end trace 0000000000000000 ]---
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
[sean: write changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: prevent mark additions during connector teardown
fsnotify_destroy_marks() keeps a reference to its current mark while it
drops conn->lock to destroy the mark. This stabilizes the forward-walk
cursor, but does not prevent a new mark from being inserted before it.
For example, an inotify watch re-added after IN_IGNORED sorts before the
old, detached mark for the same group. The walk can miss the replacement
and then detach the entire connector from the object.
The replacement is still on its group's marks_list and, for inotify, in
the watch IDR. The group mutex no longer protects the connector's object
from disappearing. An unprivileged fdinfo read racing the final detach
can consequently call igrab(NULL):
BUG: KASAN: null-ptr-deref in igrab+0x24/0x100
Write of size 4 at addr 0000000000000148
Call Trace:
igrab+0x24/0x100
inotify_show_fdinfo+0x1dc/0x5e0
seq_show+0x397/0x690
Set a DESTROYING flag under conn->lock before starting the walk, and
reject new marks on that connector with -ENOENT. The existing add-mark
error paths undo the temporary group-list entry and the backend's watch
allocation. Do not wait for teardown while holding the group mutex,
which the destroyer needs. Once the old connector is detached, an add
can install a fresh connector as before.
This closes the insertion race for all object types using the common
connector teardown, without changing the mark reference or SRCU lifetime
rules. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: free the sbi after a grace period
ext4_get_link() follows a symlink that keeps its target in a data block
in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT).
That reads s_mount_state in the ASSERT() of ext4_getblk() and again in
ext4_es_lookup_extent(), and the lookup bumps the extent status hit or
miss counter, all through sb->s_fs_info.
ext4_put_super() destroys those counters, clears sb->s_fs_info and frees
the sbi without waiting for a grace period. A pathwalk that is still in
ext4_get_link() when the last reference to the mount goes away then
dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu
counters.
With a pathwalk held up in ext4_get_link() while the last reference
goes away:
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:ext4_getblk+0xf0/0x640
Call Trace:
<TASK>
ext4_get_link+0x26c/0x410
pick_link+0xf96/0x1780
step_into_slowpath+0x9b8/0x1250
path_lookupat+0x484/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
So far that has been hard to hit. umount(2) waits for a grace period in
namespace_unlock() before it drops the mount, so only a mount whose last
reference goes away elsewhere, like the close of a file or a chdir out of
a lazily unmounted directory, can race a walker.
Keep sb->s_fs_info and free the sbi together with the extent status
counters after a grace period. Split the counters out of
ext4_es_unregister_shrinker() for that. The shrinker still gets wasted
in ext4_put_super(), the counters go with the sbi. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx()
On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one
sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[]
shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma()
dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader()
writes two such indices into meta->buffers[], which rb_cpu_meta_valid()
would reject on the next boot, discarding the previous boot's trace.
A CPU's sub-buffer array starts after its meta header and the nr_subbufs
integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx()
inverts that calculation but skips only the integers, not the header, so
its base is one sub-buffer low whenever the omitted header size crosses
the alignment boundary.
Invert the calculation with rb_subbufs_from_meta() rather than repeating
it. rb_range_buffer() maps an index back to an address through the same
helper, so the two directions can no longer disagree. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen/scsifront: Check for a NULL shadow entry on a backend response
scsifront_do_response() validates the rqid in a backend response against
VSCSIIF_MAX_REQS before using it to index info->shadow[], but then
dereferences the entry to test ->inflight without checking that the slot
is populated. Shadow slots are NULL before a command is submitted (the
host private area is zeroed at allocation) and are reset to NULL in
_scsifront_put_rqid() once a request completes, so an in-range rqid that
does not correspond to an outstanding request makes the frontend
dereference a NULL pointer.
A malicious or buggy backend can thus crash the guest by returning a
response whose rqid is in range but not in flight -- for example a
spurious response before any command has been issued, or a duplicate of
one already completed. The ring has only VSCSIIF_MAX_REQS (16) slots,
so before the first command every in-range rqid selects a NULL slot.
Reject a response whose shadow slot is not populated. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Validate the task named by a management response
__iscsi_complete_pdu() fetches the task for five response types from one
place and checks only that the index resolved:
case ISCSI_OP_LOGOUT_RSP:
case ISCSI_OP_LOGIN_RSP:
case ISCSI_OP_TEXT_RSP:
case ISCSI_OP_SCSI_TMFUNC_RSP:
case ISCSI_OP_NOOP_IN:
task = iscsi_itt_to_task(conn, hdr->itt);
if (!task)
return ISCSI_ERR_BAD_ITT;
iscsi_itt_to_task() bounds the index against cmds_max and looks at
nothing else, so a target can name any slot in the pool, including one
that has never been used. task->conn is then NULL, and both
iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One
unsolicited NOP-In is enough; a Text Response carrying the same ITT
crashes in iscsi_complete_task() instead.
Require the task to be in flight and not a SCSI command, the way
iscsi_itt_to_ctask() does for the command opcodes.
[ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI
[ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
[ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy)
[ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160
[ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00
[ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206
[ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020
[ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060
[ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000
[ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800
[ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000
[ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0
[ 6.298712] PKRU: 55555554
[ 6.298713] Call Trace:
[ 6.298714] <IRQ>
[ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0
[ 6.298758] iscsi_complete_pdu+0x54/0xa0
[ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80
[ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0
[ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390
[ 6.298804] __tcp_read_sock+0x1ab/0x810
[ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510
[ 6.298814] tcp_rcv_established+0x1f56/0x3a00
[ 6.298842] tcp_v4_do_rcv+0x449/0x960
[ 6.298847] tcp_v4_rcv+0x2245/0x3bc0 |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix data race and NULL deref on local->assoc_dev
local->assoc_dev is shared between the association path and the
association-response worker without common synchronization.
mac802154_perform_association() stores the coordinator pointer and waits
for a response. Its timeout and error paths clear the pointer and return
to mac802154_associate(), which may then free the coordinator object.
Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit
and enter mac802154_process_association_resp(), which dereferences
assoc_dev.
The worker's bit test and the handler's pointer dereference are not
atomic with respect to cleanup. Cleanup can clear assoc_dev between them,
causing a NULL dereference, or free the coordinator while the response
handler still uses the pointer.
The recorded result is exposed to the same window. assoc_status and
assoc_addr are written by the handler but read by the association path
while the associating bit is still set, so a second response for the same
request - a malicious one, for instance - can replace them between those
reads and leave the caller with an incoherent status and address pair.
The response handler only needs the coordinator extended address.
Replace assoc_dev with a cached address, removing the pointer lifetime
dependency. Protect the cached address and the associating bit with a
dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee
an atomic __le64 access on all 32-bit architectures.
wpan_dev->association_lock cannot be reused here: nl802154_associate()
holds it across rdev_associate(), hence for the whole of
mac802154_perform_association() including the wait for the response.
A response handler taking that lock would only get it once the
association has already given up.
Reset the completion, publish the cached address, and set the associating
bit while holding the lock. The response handler takes the lock, rechecks
the bit and the cached address, records the response, clears the bit, and
only then completes the waiter. Thus cleanup cannot pass the handler
between its state check and completion, and the cached 64-bit value
cannot tear.
The handler clears the bit before completing, not the woken waiter:
otherwise complete() is issued under the lock and a second (e.g.
malicious) response can reacquire it before the waiter and replace the
result. So a wait that returns success implies the bit is already clear,
and the success and negative-response paths return directly. The
transmit-error and timeout paths still clear it under assoc_lock, which
serializes any racing response against the cleanup while the call returns
the error it already selected. Both paths snapshot assoc_status and
assoc_addr under the same lock.
Both users run in process context, so a plain spinlock is sufficient.
The lock is not held while waiting for the completion. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix the recvmsg window update
iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without
testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes
the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2
is zero and one recvmsg() on its own socket is enough for an unprivileged
process to take a spurious disconnect.
It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which
allocates GFP_KERNEL inside a section the code treats as atomic. Sending
outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where
msg_recv is sampled for the advertised window and subtracted after
dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock()
while recvmsg holds no socket lock, so both can subtract the same value,
the counter goes negative and the credit reaches the peer twice.
Test the transport, claim the credit with atomic_xchg() after the last
error exit and hand it back if the transmit fails, and send once the lock
is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ctcm: Prevent XID null dereference
The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40
to signal XID validation error. If peer XID is NULL or r/w channel
pairing mismatch happens, grp->saved_xid2 is never initialized. An
attempt to set the flag in such case leads to NULL dereference.
Fix this by using the always available priv->xid->xid2_flag2 instead of
grp->saved_xid2->xid2_flag2 for validation errors. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: drain the hangcheck timer and works on V3D unbind
Nothing stops the hangcheck timer that submitted jobs arm, or the
job_done_work that the render-done interrupt queues, at teardown:
vc4_irq_disable() cancels only overflow_mem_work, and vc4_gem_destroy()
runs from the drm-managed release, after vc4_v3d_unbind() has already
uninstalled the V3D interrupt and cleared vc4->v3d. A timer still armed
by then reads V3D registers through the NULL vc4->v3d pointer, and the
late callbacks run on the vc4_dev embedding them after it has been
freed.
Drain them in vc4_v3d_unbind(): shut the timer down and cancel
reset_work before the interrupt is taken down, because its
vc4_irq_reset() re-enables it, then flush job_done_work so that
completions queued at teardown still release their jobs.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop PMTU walk when nexthop group shrinks
Commit 7d3f3b4367f3 ("net: ipv4: Cache pmtu for all packet paths if
multipath enabled") made __ip_rt_update_pmtu() update every path.
For nexthop objects, fib_info_num_path() and fib_info_nhc()
independently load nh->nh_grp. RCU protects each group's lifetime but
does not make the loads observe the same group. If replacement shrinks
the group after the loop accepts an index, fib_info_nhc() returns NULL
and update_or_create_fnhe() dereferences it.
A deterministic probe only widened the existing window between the real
operations. On v7.2, an RTM_NEWNEXTHOP replacement published a
one-member group after the PMTU reader accepted index 1 from a two-member
group, producing:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: update_or_create_fnhe+0x45/0x15b0
Stop when the indexed path is absent. Groups are dense, so no later
index exists in that snapshot. The same real-writer window completed
114,423 PMTU iterations without an oops with this check. A reproducer
is available on request.
Replacement requires CAP_NET_ADMIN in the network namespace. Where
unprivileged user namespaces are permitted, a local user can obtain it
in a new user and network namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop route notification sizing when nexthop group shrinks
Commit 680aea08e78c ("net: ipv4: Emit notification when fib
hardware flags are changed") added an RCU-only fib_nlmsg_size() call
for asynchronous hardware flag notifications.
fib_nlmsg_size() checks fib_info_num_path() before each iteration,
then fib_info_nhc() independently reloads nh->nh_grp. If
RTM_NEWNEXTHOP replaces a group with fewer paths between those loads,
fib_info_nhc() returns NULL and fib_nexthop_nlmsg_size() dereferences
it.
Stop sizing when the indexed path is absent. Nexthop groups are
dense, so the current snapshot has no later path. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix NULL current_pwq deref in chained work check
current_wq_worker() only tells us that %current is a kworker. It does
not guarantee that the worker is currently executing a work item, as
worker->current_pwq is populated only while process_one_work() is running
the work function.
is_chained_work() can be reached while queueing on a draining or
destroying workqueue. If a kworker outside work-item execution reaches
that path, current_wq_worker() returns a worker but worker->current_pwq is
NULL, and the chained-work test can fault before it emits the intended
warning.
Guard the chained-work test with worker->current_pwq. A kworker without
current_pwq is not executing work on the target workqueue, so the helper
should return false and let the draining/destroying warning fire. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: remove obsolete ERSPAN PMTU update
A tc tunnel_key action can attach a METADATA_IP_TUNNEL dst to an skb,
and mirred can redirect it to a native ip6erspan device. The legacy PMTU
update in ip6erspan_tunnel_xmit() treats that metadata dst as a route.
Since it has no output device, dst_dev(dst)->mtu dereferences NULL.
On v7.2 with KASAN, an initial UID/GID 65534 process with CapEff 0 used
self-created user and network namespaces to trigger:
KASAN: null-ptr-deref
RIP: ip6erspan_tunnel_xmit+0x10fc/0x2cc0
Kernel panic - not syncing: Fatal exception in interrupt
The update is obsolete. Commit fe1a4ca0a2b7 ("ip6_gre: process toobig
in a better way") changed IPv6 GRE Too Big handling to update the
underlay route and removed the equivalent block from __gre6_xmit().
ip6_tnl_xmit() then propagates the underlay PMTU to the overlay route.
Remove the stale ERSPAN copy and its now-unused dst variable. This
eliminates the metadata-dst dereference and keeps ERSPAN aligned with
IPv6 GRE PMTU handling. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: register TEE devices only once fully initialized
optee_probe() called tee_device_register() on both the client and the
supplicant device before the rest of struct optee had been initialized.
tee_device_register() calls cdev_device_add(), which does two things at
once: it creates /dev/tee0 and /dev/teepriv0, and it links the device
into the tee class so that class_find_device() can find it. From that
moment on the device is reachable both from user space via tee_open()
and from kernel space via tee_client_open_context(). The only gate in
teedev_open() is tee_device_get(), which merely checks that
teedev->desc is non-NULL, which was already set by tee_device_alloc().
Therefore, there is effectively no gate at all.
A context opened in that window can run against a struct optee where
- optee->call_queue.mutex is not initialized by optee_cq_init()
- optee->supp mutex and completions is not initialized by
optee_supp_init()
- optee->rpmb_dev_mutex is not initialized yet,
- the message argument cache is not initialized by
optee_shm_arg_cache_init()
- optee->ctx is still NULL
Any open session or invoke during this window takes uninitialized
mutexes and dereferences a NULL pointer.
Fix it by moving both tee_device_register() calls down to the point
where all of struct optee is set up.
[JW: adding fixes and cc] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: Serialize dead-device detachment
Rebinding an HCI socket after its controller is unregistered can race
monitor control replay and crash the kernel. hci_sock_bind() clears
hci_pi(sk)->hdev and drops the device reference under only the socket
lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for
reading.
Replay can observe a non-NULL hdev, then bind can clear it and drop the
last reference before create_monitor_ctrl_open() reads hdev->id. This
can cause a NULL pointer dereference if the pointer is reloaded, or a
use-after-free if the old pointer is retained.
The kernel reported:
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
RIP: 0010:create_monitor_ctrl_open+0x579/0x800
Call Trace:
hci_sock_bind+0xd96/0x1190
__sys_bind+0x166/0x200
__x64_sys_bind+0x6d/0xb0
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The same missing serialization lets hci_send_to_sock() select a socket
for the old device and queue its frame after bind has detached the socket
or installed a new binding.
Take hci_sk_list.lock for writing when clearing the device pointer and
resetting the socket state. This waits for existing replay and delivery
readers to finish before detachment and prevents later readers from
using the old binding. Keep hci_dev_put() outside the critical section
because the final device release can sleep. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown
syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an
RFCOMM tty is closed.
rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only
then registers the tty device and saves it in dev->tty_dev. If that
registration fails, dev->tty_dev is never set at all. The device can be
looked up in the meantime, so an open() of /dev/rfcommN gets through
rfcomm_tty_install() and attaches to it. When that tty is closed again,
rfcomm_dev_shutdown() uses dev->tty_dev without checking it:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047]
RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131
Call Trace:
tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372
tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705
tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718
__fput+0x418/0xa50 fs/file_table.c:512
rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the
same check to rfcomm_dev_shutdown(), so the tty device is only moved
when it was actually registered. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: refuse an automount below a mount that is in no namespace
It's possible to add autmounts even when the parent mount isn't in the
mount namespace of the caller. The only requirement we have is that the
parent mount namespace must not be NULL, i.e., unmounted.
Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes
that trivially true. So that passes the test and attach_recursive_mnt()
accepts that as a mount point and funny enough, count_mounts()
dereferences MNT_NS_INTERNAL. The problem is it is an error pointer...
So we can reach this in userspace via fanotify. A filesystem mark on the
lower filesystem of an overlay reports paths on the layer clone and
reading the event hands out a descriptor on it. For example with debugfs
as the lower layer it goes kaboom:
openat(evfd, "tracing", O_DIRECTORY)
Oops: general protection fault
KASAN: null-ptr-deref in range [0x1d0-0x1d7]
RIP: 0010:count_mounts+0x35/0x200
attach_recursive_mnt
finish_automount
And since that sleeping beauty happens under namespace_sem held for
writing every mount operation on the system blocks from then on.
Congrats.
Use is_mounted() instead which rejects unmounted and internal mounts
alike. The open fails with EINVAL just as it did before
clone_private_mount() used MNT_NS_INTERNAL. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: use the local P2P device on metadata allocation failure
nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data
and metadata SGL allocations succeed. If the data allocation succeeds
but the metadata allocation fails, out_free_sg passes req->p2p_dev to
pci_p2pmem_free_sgl() before that assignment has taken place.
Pass the local p2p_dev argument instead, so cleanup uses the same PCI
device as the successful data allocation. |
