| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A path traversal vulnerability in Tenable Agent 11.2.0 and 11.1.3 and lower allows a privileged attacker to write arbitrary files outside the intended plugin directory, potentially leading to remote code execution. |
| Improper authentication in the WatchGuard Agent allows an unauthenticated attacker with network access to cause the agent to execute arbitrary code with elevated privileges. |
| The Ingenic T31 SoC boot ROM flash-boot verification path compares only a single 32-bit word of the RSA signature output against a single 32-bit word of the SHA-256 payload digest, rather than compare the full data. This allows an attacker with physical write access to boot media to forge modified SPL (Secondary Program Loader) images that pass secure boot verification without possession of the OEM signing key. Each forgery attempt succeeds with approximately 2/3 probability. This has been validated via reverse engineering, software emulation against vendor-signed images, and end-to-end hardware acceptance of a forged firmware image on a Wyze Video Doorbell v2 (T31X). |
| The Ingenic T41, and probably also T32, T40, and A1 SoC boot ROMs parse and execute an attacker-controlled init table from the SPL header before checking the secure boot state and before invoking signature verification. The init table parser supports full-address 32-bit write operations, allowing modification of SRAM-resident secure boot state prior to the verification decision. An attacker with physical write access to boot media can inject an init-table entry that disables the secure boot check, causing the ROM to accept unsigned or modified first-stage boot code. This has been hardware-validated on a secureboot-enabled T41 device; ROM analysis confirms closely related behavior on T32, T40, and A1. |
| Verification Bypass vulnerability exists in EPSON 150075647YWWV110 EasyMP Network Updater Ver.1.20. The Epson projector can be updated by encrypted firmware through USB. |
| A vulnerability in the upgrade component of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to install a malicious file when upgrading. The vulnerability is due to insufficient signature validation. An attacker could exploit this vulnerability by providing a crafted upgrade file. A successful exploit could allow the attacker to upload crafted code to the affected device. |
| Improper verification of cryptographic signature in Azure Data Factory allows an unauthorized attacker to elevate privileges over a network. |
| A flaw was found in Picketlink's SP signature validation; a SAML response containing zero assertion elements matching the signature check can allow an attacker to forge a SAML response and auth as any principal with any roles on the protected application. |
| A potential security vulnerability has been identified in the OMEN Gaming Hub for versions prior to 1101.2608.0.0. The vulnerability could potentially allow a local attacker to escalate privileges due to insufficient access controls. |
| openssl_encrypt versions before 1.4.0 contain a vulnerability in PublicKeyBundle.from_dict() that creates key bundles from untrusted data without verifying signatures. Attackers can call from_dict() followed by to_identity() without signature verification to encrypt data using attacker-controlled public keys, leaking secrets. |
| openssl_encrypt versions before 1.4.0 contain an authentication bypass vulnerability in pqc.py where AES-GCM decryption failures trigger fallback to unauthenticated AES-CTR mode. Attackers can modify ciphertext in transit to bypass integrity verification and perform bit-flipping attacks without detection. |
| Missing signature validation in JSON Web Tokens in Otalio Ship Property Management System versions before 2.22.0 allows authenticated attackers to escalate privileges via tampering with JWTs |
| libcrux-ecdh and libcrux-ed25519 before 0.0.6, and libcrux-psq before 0.0.7, contain cryptographic implementation bugs. libcrux-ecdh did not properly check length and clamping during X25519 secret validation (and had a broken clamping check for imported X25519 secret keys); libcrux-ed25519 performed a duplicated clamping step during key generation; and libcrux-psq panicked instead of propagating an AEADError. These were fixed in the respective patched releases. |
| The github-issue-bot templates in appwrite/templates verify the GitHub webhook signature with an inverted condition. verifyWebhook in node/github-issue-bot/src/github.js and in node-typescript/github-issue-bot/src/github.ts returns "typeof signature !== 'string' || (await verify(...))", so when the X-Hub-Signature-256 header is absent the first operand is true, the logical OR short-circuits, and the function reports success without performing any HMAC verification. main.js rejects a request only when verifyWebhook returns false, so an unauthenticated request carrying no signature passes the check. Processing then continues to postComment, which takes the repository and issue objects directly from the request body, letting the caller direct the deployed function to post a comment on a repository and issue of their choosing using the configured GITHUB_TOKEN, with the issue author login from the body interpolated into the comment text. |
| A flaw was found in Red Hat Quay's Stripe billing webhook handler. This vulnerability allows an unauthenticated attacker to forge billing events by sending crafted JSON requests to the `/webhooks/stripe` endpoint without validating the Stripe-Signature header. Successful exploitation can lead to the unauthorized resetting of a namespace's build quota to its maximum and trigger unsolicited billing emails to namespace administrators. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SimpleTrustManagerFactory.engineGetTrustManagers() and related paths wrap any user-supplied plain X509TrustManager in X509TrustManagerWrapper, which extends X509ExtendedTrustManager but implements the 3-arg checkServerTrusted(chain, authType, SSLEngine) by discarding the SSLEngine and calling the 2-arg delegate. Because the object now IS an X509ExtendedTrustManager, neither SunJSSE's internal AbstractTrustManagerWrapper nor Netty's own OpenSslX509TrustManagerWrapper will re-wrap it to add endpoint-identification. Consequently, even though Netty 4.2 sets endpointIdentificationAlgorithm="HTTPS" by default, a client built with `SslContextBuilder.forClient().trustManager(somePlainX509TrustManager)` performs no hostname verification at all. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Lemur manages TLS certificate creation. Prior to 1.9.2, the JWT verifier in lemur/auth/service.py:130-137 used fetch_token_header to read header_data["alg"] from an unverified token and passed that attacker-controlled value to decode_with_multiple_secrets. PyJWT 2.x rejects alg=none with the configured key, so the flaw is a defense-in-depth gap rather than a direct authentication bypass in the shipped configuration. The unpinned algorithm can become exploitable after an asymmetric-signing migration through algorithm confusion, and it weakens algorithm-based anomaly detection because the token chooses the recorded value. A separate disclosure of LEMUR_TOKEN_SECRET would also permit forged HS256 tokens, although that disclosure is an independent prerequisite. The fix introduces the server-controlled LEMUR_TOKEN_ALGORITHMS allowlist and defaults it to HS256. This issue is fixed in version 1.9.2. |
| kas is a setup tool for bitbake based projects. Prior to version 5.3, when relying solely on a git commit ID (SHA-1 or SHA-256) to qualify if a checkout of a repository is equivalent to the state validated while adding its commit ID to a kas configuration, users may be tricked to check out a branch of the same name from this repository. This implies that the referenced repository has been taken over by an attacker and modified to carry such a branch. SHA-1 commits may also be replaced by creating hash collisions, so the primary impact of this issue is on SHA-256 commit IDs. Version 5.3 fixes the issue. As a workaround, avoid relying solely on the commit ID for integrity validation of a repository that might become under control of a malicious 3rd party. If available, additional validate cryptographically signed commits or tags. Alternatively, mirror the repository to a save place, validate its integrity, and use this instead of the original one. |
| PAX Technology Q80 Application Installer Signature Verification Bypass Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of PAX Technology Q80. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the application installer. The issue results from the lack of proper verification of a cryptographic signature before installing an application. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-30585. |
| @fastify/jwt is a JSON Web Token plugin for Fastify. In versions before 10.2.2, a per-request verification key passed to request.jwtVerify({ key }) is silently overridden by the plugin's globally configured secret, because the option merge applies the global key last. Applications that use different keys for different authorization domains, for example separate user and admin keys, therefore accept a token signed with the global key on a route that explicitly requires another key. This lets an ordinary authenticated user cross a key-based trust boundary without knowing either secret. The issue is fixed in @fastify/jwt 10.2.2, where an explicit per-call key takes precedence over the global secret. Users should upgrade to 10.2.2. |
