| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Instantiate file_truncate and path_truncate hooks
Instantiate the file_truncate and path_truncate LSM hooks to reset the
action cache flags (IMA_DONE_MASK) as soon as truncation is requested,
so the file, based on policy, is re-collected, re-measured, re-audited,
and re-appraised on next access. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/psi: Shut down rtpoll_timer in psi_cgroup_free()
psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath
and can race psi_trigger_destroy() taking down the last rtpoll trigger under
rtpoll_trigger_lock:
psi_schedule_rtpoll_work() psi_trigger_destroy()
rcu_read_lock();
task = rcu_dereference(rtpoll_task);
rcu_assign_pointer(rtpoll_task, NULL);
timer_delete(&rtpoll_timer);
mod_timer(&rtpoll_timer, ...);
rcu_read_unlock();
synchronize_rcu();
kthread_stop(task_to_destroy);
The group can then be freed with the re-armed timer still pending, and
poll_timer_fn() runs on freed memory.
461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling
mechanism") deleted the timer synchronously after the synchronize_rcu(),
which prevented this but raced trigger creation instead: the deletion could
cancel the timer that a new trigger set armed during the grace period and,
as creation also reinitialized the timer at the time, corrupt it.
8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the
initialization into group_init() and the deletion into the locked section,
trading the creation races for the window above.
Neither placement in the destruction path works. A pending timer firing
while the group is alive is harmless though. poll_timer_fn() just wakes the
rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's
lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it
by then. timer_shutdown_sync() because the timer is never armed again. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Use children field for rcu head and add memory barriers
When an eventfs inode is freed, it sets ei->is_freed and then uses its
ei->list to add it to the srcu link list as the list field is a union with
the rcu list head. As the ei->list is used to iterate over an SRCU
protected list without taking the eventfs_mutex, there's nothing stopping
the iteration over that list to see the ei->rcu instead of the ei->list
and it will read a corrupt target.
To fix this, change the union of the rcu list head with the children list.
On freeing the eventfs inode, set the is_free and execute a smp_wmb()
before adding the eventfs inode to the SRCU list.
On iteration of the ei->children list, at the start, execute a smp_rmb()
and then read the is_freed of the ei to see if the children list is still
valid. If is_freed is set, then the ei_child read is not valid and the
loop should exit immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent in6_dev_get() from resurrecting inet6_dev
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix TFO max_qlen accounting across reuseport migration
A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through
far more pending Fast Open requests than it was configured for.
This only shows up with SO_REUSEPORT listener migration, where closing a
listener hands its still-pending TFO children over to a surviving one.
fastopenq.qlen is charged in tcp_fastopen_create_child() when the child
is created and uncharged in reqsk_fastopen_remove() when the handshake
completes. The uncharge follows rsk_listener of the request the child
points at, and inet_reqsk_clone() has repointed the child at a new
request owned by the new listener, so the ++ and the -- land on two
different sockets. The new listener's qlen drifts negative and its
limit no longer binds.
Charge the new listener during migration, like reqsk_queue_migrated()
already does for queue->young and queue->qlen. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve pointer state for commuted arithmetic
When scalar += pointer is handled in adjust_ptr_min_max_vals(), the
destination register inherits the pointer state from the source pointer.
Copying only selected fields is fragile because pointer provenance is
tracked by several bpf_reg_state fields.
Use the caller's temporary offset register to preserve the scalar operand
while replacing the destination with the full pointer state. This preserves
the frame number for PTR_TO_STACK registers and keeps parent identity
fields consistent. |
| An information disclosure vulnerability in the URL Filtering feature of Palo Alto Networks PAN-OS® software enables an unauthenticated user with network access to obtain sensitive information.
Panorama is not impacted by this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF
Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable
freeing", v6.
Kernel page table walkers fall into two broad categories - those ranges
where no exclusion is required via walk_kernel_page_table_range_lockless()
and those where exclusion is required via walk_kernel_page_table_range()
or walk_page_range_debug().
The former category is used only by arm64 arch code operating on ranges it
both wholly owns and does not concurrently write.
The latter category consists of kernel page table walkers operating on
ranges that are wholly owned (but which need exclusion against concurrent
writers).
The lock used for exclusion is the mmap lock, and for kernel ranges this
is the mmap lock on init_mm.
ptdump is a special case being both the only user of
walk_page_range_debug(), and the only case in which it walks ranges it
does not own.
This presents a problem, as page tables may be freed under ptdump. And
indeed there is a use-after-free bug in the kernel as a result, which this
series addresses.
vmap promotes page tables to huge leaf entries where possible, freeing the
lower page table when it does. It does this with no meaningful locks held
against concurrent ptdump walks.
As a result, use-after-free can currently occur. This series addresses
the issue by having the vmap huge promotion logic acquire the mmap read
lock while both setting the huge page table entry and freeing the prior
leaf page table.
The ptdump code already acquires the mmap write lock, so by doing so we
ensure that the ptdump walker only ever observes either the huge page
table entry or the existing page table entry, and nothing is freed
underneath it.
A mitigation for this issue was already applied for arm64 in commit
fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which this series
has to deal with carefully.
This mitigation resolves the issue by acquiring the mmap read lock on
init_mm on vmap page table free if a ptdump is in progress.
However the fix in this series would cause a deadlock if we were to simply
apply it for arm64 without also reverting the change.
This is because vmap may acquire the read lock before ptdump attempts to
acquire the write lock, which then gets queued, and rwsem starvation rules
mean that the (unacknowledged) nested mmap read lock in the arm64 code
would also block, meaning the original read lock is never released and
thus deadlock.
This series works around this by #ifndef CONFIG_ARM64'ing the mmap read
lock in vmap logic, then partially reverting commit fa93b45fd397 ("arm64:
Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap
support, and removing the ifdeffery with the partial revert patch.
There are related issues that are also addressed in this series:
* x86 page attribute logic, specifically Change Page Attributes (CPA),
implements a feature whereby huge ranges can be collapsed into huge leaf
entries. This can similarly cause a UAF when done in parallel with a
ptdump walk, so similarly acquire the init_mm mmap lock to avoid this.
* The CPA logic allows concurrent page table manipulation and CPA
collapse, meaning the former risks accessing a page table the latter
frees. Fix this by acquiring mmap write lock on init_mm across the
whole CPA collapse operation and read lock on the page table
manipulation.
* x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm
walks, and in x86's case arbitrary mm's), so we ensure kernel mappings
remain stable by locking the init_mm as well as the mm being walked.
The ordering of patches is established for both strict dependencies (the
arm64 partial revert in particular has to be done after the vmap changes)
and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA
fixes are in place).
This patch (of 3):
Currently there is a nasty ra
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: ax88179_178a: fix skb leak in ax88179_tx_fixup()
When the interface has NETIF_F_SG enabled and skb_linearize() fails in
ax88179_tx_fixup(), the function returns NULL without freeing the skb.
usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop
(info->flags does not set FLAG_MULTI_PACKET for this driver), jumping
to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`.
Because tx_fixup() returned NULL, the local skb variable in
usbnet_start_xmit() is NULL, so the original skb is never freed — a
memory leak on every TX frame whose linearization fails (i.e. under
memory pressure).
Free the skb before returning, matching the error handling already used
for the pskb_expand_head() failure path in the same function. |
| A flaw was found in OpenStack Keystone where an application credential token can escape its intended project scope through token-method reauthentication. Keystone rejects an explicit scope change for an application credential token, but an omitted scope falls through to the owner's default project. If the owner has roles on that default project, Keystone issues a new token scoped there while still carrying the original application credential identity. Custom Keystone authentication plugins are subject to the same incomplete rescope guard. This allows a limited-scope application credential for one project to access another project within the owner's role assignments. |
| Versa SASE Client for Windows versions released between 7.8.7 and 7.9.4 contain a local privilege escalation vulnerability in the audit log export functionality. The client communicates user-controlled file paths to a privileged service, which performs file system operations without impersonating the requesting user. Due to improper privilege handling and a time-of-check time-of-use race condition combined with symbolic link and mount point manipulation, a local authenticated attacker can coerce the service into deleting arbitrary directories with SYSTEM privileges. This can be exploited to delete protected system folders such as C:\\Config.msi and subsequently achieve execution as NT AUTHORITY\\SYSTEM via MSI rollback techniques. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write on Type II inbound URBs
data_ep_set_params() sizes each URB transfer buffer before it adds the
Format Type II transfer delimiter:
u->packets = urb_packs;
u->buffer_size = maxsize * u->packets;
if (fmt->fmt_type == UAC_FORMAT_TYPE_II)
u->packets++; /* for transfer delimiter */
u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
buffer_size is computed from the pre-increment packet count and never
recomputed, so for a Type II endpoint the buffer is one packet short of
the packet count the URB is built with.
prepare_inbound_urb() then lays out one iso frame per packet and never
consults buffer_size:
offs = 0;
for (i = 0; i < urb_ctx->packets; i++) {
urb->iso_frame_desc[i].offset = offs;
urb->iso_frame_desc[i].length = ep->curpacksize;
offs += ep->curpacksize;
}
urb->transfer_buffer_length = offs;
urb->number_of_packets = urb_ctx->packets;
The last descriptor therefore points one packet past the end of the
transfer buffer, where the host controller writes device data on every
inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound
their fill loops by ctx->buffer_size, so only capture is affected.
fmt_type comes from the device's audio streaming descriptors, so any
device advertising a Type II capture format hits this once userspace sets
hw_params on the stream.
KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report
per inbound transfer:
BUG: KASAN: slab-out-of-bounds in dummy_timer
Write of size 64 at addr ffff0000186171c0 by task cons02/166
__asan_memcpy
dummy_timer
hrtimer_run_softirq
Allocated by task 166:
usb_alloc_coherent
snd_usb_endpoint_set_params
The buggy address is located 0 bytes to the right of
allocated 64-byte region [ffff000018617180, ffff0000186171c0)
Compute buffer_size after the delimiter packet has been accounted for,
and bound the fill loop by buffer_size, as prepare_silent_urb() already
does on the outbound side. This grows every Type II URB allocation by
one maxsize packet.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: validate metadata when processing requests
The zero-copy path validates TX metadata while obtaining the descriptor
context, then reads it again later when preparing the hardware request.
User space can change the metadata between those operations and bypass the
original validation.
Validate the metadata in xsk_tx_metadata_request() and use the resulting
flags snapshot for every feature check. Read request fields once so all
zero-copy drivers process only values observed after successful
validation. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: require at least 16 bytes of TX metadata
AF_XDP accepts a TX metadata length as small as eight bytes, but every
supported request needs the flags plus at least one eight-byte request
field. Such short metadata also lets the kernel read beyond the registered
area.
Require 16 bytes rather than sizeof(struct xsk_tx_metadata) to preserve
compatibility with applications that do not use launch-time metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amxdna: Fix page-insertion errors in amdxdna_insert_pages()
Two error paths in amdxdna_insert_pages() called vma->vm_ops->close(vma)
before returning an error code to the caller. This is incorrect:
amdxdna_gem_obj_mmap() registers an HMM interval notifier before calling
amdxdna_insert_pages(), and on a hard error it jumps to hmm_unreg to undo
that registration. Calling vm_ops->close() manually — which drops the
shmem pages_pin_count and the GEM object reference that backs the VMA —
before the mmap syscall has even returned causes those resources to be
released while the VMA is still alive. The kernel VMA teardown will call
vm_ops->close() a second time when the process later unmaps the range,
producing a reference count underflow.
Replace both hard-error returns with a deferred-fault approach that keeps
the VMA alive and retries page insertion through the HMM range-fault path. |
| In the Linux kernel, the following vulnerability has been resolved:
enic: fix tx_hang_reset use-after-free on device removal
enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.
cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Skip sub-disable teardown for never-linked sub-schedulers
A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().
That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.
The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.
Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
Locking is disabled in the regmap config as this driver uses its own
lock. This means that all calls to regmap functions (read or write) must
hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do
this, and it was therefore possible that multiple threads could cause an
incorrect register to be read/written.
A previous patch partly fixed this, but only protected the write to the
interrupt mask register, and not the read from the direction register. |
| The Versa Concerto SD-WAN orchestration platform is vulnerable to an privileges escalation and container escape vulnerability caused by unsafe default mounting of host binary paths that allow the container to modify host paths. The escape can be used to trigger remote code execution or direct host access depending on the host operating system configuration.This issue is known to affect Concerto from 12.1.2 through 12.2.0. Additional versions may be vulnerable. |
