| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Zeroconf is a pure Python implementation of multicast DNS service discovery. Prior to 0.149.6, DNSIncoming._log_exception_debug and the four QuietLogger exception-dedup methods stored an unbounded _seen_logs dictionary keyed by attacker-influenced IncomingDecodeError messages, retaining sys.exc_info() tracebacks whose frame locals kept raw packet self.data buffers and allowing unauthenticated hosts on the local link over UDP/5353 (224.0.0.251 / ff02::fb) to drive memory growth until mDNS-dependent features degrade or the process is OOM-killed. This issue is fixed in version 0.149.6. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
The setup_packet of control urb is not freed if usb_submit_urb fails or
the submitted urb is killed. Add free in these two paths. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix metabuf leak in inode xattr initialization
commit bb88e8da0025 ("erofs: use meta buffers for xattr operations")
converted xattr operations to use on-stack erofs_buf instances.
erofs_init_inode_xattrs() uses such a metabuf while reading the inline
xattr header and shared xattr id array.
Some error paths after erofs_read_metabuf() leave through out_unlock
without dropping the metabuf, so the folio reference can leak.
Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a
no-op if no folio has been acquired, and this keeps all paths after
taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix debugfs_lookup dentry leak and error handling
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash. |
| In JetBrains IntelliJ IDEA before 2026.2.1 command execution via crafted Markdown preview content was possible in trusted projects |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvneta: re-enable percpu interrupt on resume
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state. |
| Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Ranger.
This issue affects Apache Ranger: from 0.6 through 2.8. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths. |
| Scriban before 7.0.0 (affected versions <= 6.6.0) contains a denial-of-service vulnerability in which the LimitToString safety limit (default 1MB) can be bypassed because ObjectToString resets the per-call length counter (_currentToStringLength) on every top-level call and StringBuilderOutput enforces no cumulative output-size limit. An attacker who can supply a template can render a near-limit string repeatedly in a loop, allocating approximately 1GB of memory and causing an out-of-memory condition that crashes the host application. |
| In JetBrains YouTrack before 2026.1.13901,
2026.2.17950 doS attack was possible via crafted type parameters |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/reset |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.11, POST /api/stripe/webhook, POST /api/creem/webhook, and POST /api/waffo/webhook read and log full request bodies before signature validation in router/api-router.go and the payment controllers, allowing an unauthenticated attacker to cause memory pressure, container restarts, or disk exhaustion without forging a successful payment. This issue is fixed in version 1.0.0-rc.11. |
| IBM Db2 12.1.5 for Linux, UNIX and Windows (includes DB2 Connect Server) could allow a local attacker to cause a denial of service due to a memory leak. |
| Scriban before 7.0.0 (affected versions <= 6.6.0) contains an uncontrolled memory allocation vulnerability in the string.pad_left and string.pad_right template functions, which perform no validation on the width parameter before delegating to .NET's String.PadLeft/PadRight. When an application exposes Scriban to untrusted template input, an attacker can supply an arbitrarily large width value (e.g., 500,000,000) to trigger ~1GB memory allocations in a single call, resulting in OutOfMemoryException and denial of service. The TemplateContext.LimitToString limit does not prevent this because it is only enforced after the string has been fully allocated. |
| Net::OAuth versions before 0.32 for Perl allow memory exhaustion via unbounded caching of failed module loads in smart_require.
smart_require stores results in a process-global hash with no bound and no eviction, and keeps an entry for every class name it is asked about, including names that failed to load, because the return value of the failed eval is stored before the error is checked. The key comes off the wire on the server side: _signature_method_class builds the class name from the signature_method parameter of the incoming message, and verify resolves it before any signature is checked.
A remote client chooses both how many entries are created and how long each key is. In a persistent server the hash grows for the life of the worker process until it exhausts memory. Header size limits bound the key length on the Authorization header path, but not on a POST body. |
| Scriban versions from 3.0.0 through 7.2.5 contain a denial of service vulnerability in the ScriptRange.Multiply operator that bypasses LoopLimit when the left operand is a lazy sequence. Attackers can supply templates with array multiplication on lazy sequences to execute billions of uncharged iterations, pinning CPU cores and exhausting garbage collection resources even when LoopLimit is set to 1. |
| FileBrowser versions before 2.63.19 fail to enforce the declared Upload-Length in the TUS resumable-upload PATCH endpoint, allowing authenticated users to write arbitrary data to disk. Attackers can send oversized request bodies that exceed the declared upload length to exhaust available disk space and cause service unavailability. |
| A vulnerability was detected in GL.iNet A1300, AX1800, AXT1800, MT2500, MT3000, MT6000, X3000 and XE3000 4.8.x. This issue affects some unknown processing of the file /usr/bin/gl_nas_sys of the component NAS Command Service. The manipulation results in os command injection. The attack may be launched remotely. Upgrading to version 4.9.0 is capable of addressing this issue. It is suggested to upgrade the affected component. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| A vulnerability has been found in Edimax EW-7478APC 1.04. Affected by this issue is the function stainfo of the file /goform/stainfo. The manipulation of the argument interface leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
