| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: itg3200: fix i2c read into the wrong stack location
itg3200_read_all_channels() takes `__be16 *buf' as a parameter and
fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the
parameter (a pointer), `&buf' is the address of the local pointer
slot on the stack of itg3200_read_all_channels(), not the address
of the caller's scan buffer. The (char *) cast hides the type
mismatch.
i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)
= 8 bytes into the parameter's stack slot, which is discarded when
the function returns. The caller's scan buffer in
itg3200_trigger_handler() is never written to, so
iio_push_to_buffers_with_timestamp() pushes uninitialised stack
contents to userspace via /dev/iio:deviceX every scan -- both a
functional bug (no actual gyroscope or temperature data is
delivered through the triggered buffer) and an information leak.
The non-buffered read_raw() path is unaffected: it goes through
itg3200_read_reg_s16() which uses `&out' on a local s16 value,
where that is correct.
Drop the spurious `&' so the i2c read writes into the caller's
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: xpad - fix out-of-bounds access for Share button
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: line-display: fix OOB read on zero-length message_store()
linedisp_display() unconditionally reads msg[count - 1] before
checking whether count is zero, so a write of zero bytes to the
message sysfs attribute hits msg[-1]:
write(fd, "", 0);
-> message_store(..., buf, count=0)
-> linedisp_display(linedisp, buf, count=0)
-> msg[count - 1] == '\n' ; OOB read
The kernfs write buffer for that store is a 1-byte allocation
(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),
so msg[-1] is a 1-byte read before the slab object. On a
KASAN-enabled kernel this trips an out-of-bounds report and
panics; on stock kernels it silently reads adjacent slab data
and, if that byte happens to be '\n', the following count--
wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().
linedisp_display() is reached from the message_store() sysfs
callback (drivers/auxdisplay/line-display.c message attribute,
mode 0644) and from the in-tree initial-message setup with
count == -1, so the OOB path is only userspace-triggerable via
zero-byte writes; vfs_write() does not short-circuit on
count == 0 and kernfs_fop_write_iter() dispatches the store
callback regardless.
Guard the trailing-newline trim with a count check. The
existing if (!count) block then takes the clear-display path
unchanged.
Affects every auxdisplay driver that registers via
linedisp_register() / linedisp_attach(): ht16k33, max6959,
img-ascii-lcd, seg-led-gpio. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to disclose information over a network. |
| Plaintext storage of a password vulnerability in Crypttech Crypto and Informatics Technologies Industry and Trade Inc. Vatos DLP allows Use of Known Domain Credentials.
This issue affects Vatos DLP: from 1.1.176 before 1.1.243. |
| Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| Apache bRPC versions before 1.18.0 do not consistently enforce the configured max_body_size limit in non-progressive HTTP/1 and HTTP/2 parsing and in memcache and couchbase response parsing.
A remote unauthenticated peer can cause an affected process to buffer message data beyond the configured limit, which may lead to memory exhaustion and denial of service.
Users should upgrade to 1.18.0 or apply the patch from PR https://github.com/apache/brpc/pull/3382 . The fix rejects oversized buffered HTTP bodies, returns HTTP 413 for HTTP/1 requests, resets oversized HTTP/2 streams, and rejects oversized memcache and couchbase responses from their declared lengths. Progressive HTTP reading remains supported because it uses bounded buffering. |
| The Redis protocol implementation in Apache bRPC allowed inline command parsing to allocate and copy the full connection buffer before a complete CRLF-terminated command was available. A remote attacker with access to a Redis-protocol bRPC service could send long inline inputs without a terminating CRLF to increase memory usage and CPU copy overhead, potentially causing denial of service.
Root Cause:
The Redis inline command parser allocated memory based on the current input buffer size and copied the entire buffer before determining the current inline command boundary. The existing redis_max_allocation_size limit was applied to RESP bulk strings and arrays, but not effectively to the inline command path before allocation.
Affected Scenarios:
Use Apache bRPC server with Redis protocol enabled and reachable by untrusted clients.
How to Fix:
1. Upgrade Apache bRPC to version 1.18.0, which fixes this issue.
2. Apply the patch from PR https://github.com/apache/brpc/pull/3363 .
Note:
The fix applies redis_max_allocation_size to Redis inline command lines and scans for CRLF before allocating parser arena memory. Inline command lines exceeding this limit are rejected. |
| The RTMP AMF parser in Apache bRPC accepts AMF string lengths and array counts directly from untrusted input. A remote unauthenticated attacker who can reach a bRPC server with RTMP enabled can send a small AMF payload with an excessive declared long string length or array count, causing excessive memory allocation or resource consumption before the parser rejects the incomplete payload.
Root Cause:
The AMF long string parser resized the destination string to the declared 32-bit length before validating that the stream contained that many bytes. ECMA array and strict array parsers also accepted 32-bit element counts without a configurable upper bound.
Affected Scenarios:
Deployments that enable the bRPC RTMP server component and accept RTMP traffic from untrusted clients. Direct uses of the AMF parser on untrusted data are also affected.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3353
Note:
The fix introduces configurable AMF parsing limits. The default maximum string size is 64 MiB and the default maximum array element count is 1,048,576. Payloads above these limits are rejected. The limits can be adjusted with amf_max_string_size and amf_max_array_size. |
| Uncontrolled recursion in the AMF parser in Apache bRPC < 1.18.0 allows a remote RTMP peer to crash a bRPC process by sending deeply nested AMF objects or arrays. The parser recursively processed nested AMF containers without enforcing a depth limit, which could exhaust the native stack.
Affected Scenarios:
Applications using bRPC RTMP support and parsing AMF data from an untrusted RTMP peer. This includes RTMP servers parsing client command messages, RTMP clients parsing server responses or status messages, and either side parsing inbound AMF script data such as metadata or cue points. Direct callers of ReadAMFObject or ReadAMFArray on untrusted input are also affected.
How to Fix:
1. Upgrade Apache bRPC to 1.18.0.
2. Apply the patch from PR https://github.com/apache/brpc/pull/3344 .
Note:
The fix introduces a configurable AMF nesting depth limit with default value 128. AMF objects or arrays deeper than amf_max_depth are rejected after applying the fix. |
| Uncontrolled recursion in the Redis reply parser in Apache bRPC < 1.18.0 allows a remote Redis server peer to crash a bRPC Redis client process by returning a deeply nested RESP array reply. The parser recursed once for each nested array level without enforcing a depth limit. The fix adds a configurable Redis reply depth limit with default value 128 and rejects replies exceeding that limit.
Affected Scenarios:
Applications using bRPC as a Redis client with ChannelOptions.protocol="redis" and receiving replies from an untrusted or faulty Redis server peer.
How to Fix:
1. Upgrade Apache bRPC to 1.18.0.
2. Apply the patch from PR https://github.com/apache/brpc/pull/3344 .
Note:
After applying the fix, Redis replies with array nesting deeper than redis_max_reply_depth are rejected. |
| Uncontrolled recursion in the HTTP/2 HPACK decoder in Apache bRPC before 1.18.0 allows remote attackers to cause denial of service by sending a crafted HTTP/2 header block containing many consecutive Dynamic Table Size Update entries. Each update was decoded by recursively invoking the HPACK decoder, which could exhaust the thread stack before a header field or end of input was reached.
Root Cause:
The bRPC HPACK decoder recursively decoded the next entry after processing a Dynamic Table Size Update. The decoder did not bound the recursion depth, so a long sequence of update entries could consume excessive stack space.
Affected Scenarios:
Use bRPC with the built-in HTTP/2 implementation to accept HTTP/2 traffic from an untrusted network.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3343
Note:
The fix changes HPACK Dynamic Table Size Update decoding to use iterative parsing instead of recursive parsing. |
| MONAI from 1.6.0 before 1.6.1 contains a remote code execution vulnerability in Auto3DSeg algo_from_json() that allows attackers to run Python code via a crafted work directory's algo_object.json. Attackers can ship a malicious algorithm_templates module plus a _target_ name that is imported and instantiated when victims call AutoRunner or import_bundle_algo_history, executing code under default configuration. |
| Use after free in Blink in Google Chrome prior to 156.0.8078.79 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| The WP Visitor Statistics (Real Time Traffic) WordPress plugin before 8.8 does not sanitize and escape tracking data derived from public visitor requests before storing it and outputting it in the administrative statistics dashboard, allowing unauthenticated attackers to inject arbitrary web scripts that execute when a logged-in administrator views the statistics pages. |
| The Enable Media Replace WordPress plugin before 4.2.3 does not restrict the classes allowed when deserializing stored metadata during its media replace-and-update-links routine, allowing unauthenticated users to inject a PHP object that is instantiated when a user with upload access performs a routine media replacement, resulting in PHP Object Injection and local file inclusion of existing PHP/HTML files, which can be escalated to remote code execution where an attacker-influenced PHP or HTML file is present on the server.
This is a regression of CVE-2023-4643, which was fixed in 4.1.3 and reintroduced in 4.1.4. |
| Incorrect default permissions in ASP.NET Core allows an authorized attacker to elevate privileges locally. |
| CoreShop by CoreUnion through 1.5.5 contains an unauthenticated sql injection vulnerability in the api/Agent/GetGoodsPageList endpoint via the order parameter appended to an ORDER BY clause. Anonymous attackers can inject subqueries that bypass SqlSugar's field check to extract member accounts and orders through boolean-based or time-based blind techniques. |
| CoreShop through 1.5.5 contains an unauthenticated sql injection vulnerability in the api/Good/GetGoodsPageList endpoint via the unvalidated order parameter appended to ORDER BY. Attackers can inject subqueries that bypass SqlSugar's field check and use boolean-based or time-based blind techniques to extract member accounts and orders. |
