| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An authenticated user can cause a {{mongod}} process to be terminated by the operating system under memory pressure by performing a specific data type conversion operation within MongoDB's aggregation framework. The behavior stems from disproportionate memory consumption during this operation, and requires both write access to the database and the ability to run aggregation queries. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/gntdev: fix error handling in ioctl
When gntdev_ioctl_map_grant_ref() fails to copy the operation result
back to userspace after successfully adding the mapping to the list,
the error path returns -EFAULT without releasing the reference
acquired by gntdev_alloc_map(). The mapping remains in priv->maps
with a refcount of 1, causing a memory leak and a dangling list
entry.
Additionally, gntdev_add_map() may modify map->index to avoid overlap
with existing mappings. Therefore, the index returned to userspace
must be obtained after gntdev_add_map() completes.
Fix this by holding the mutex across gntdev_add_map(), retrieving
the correct index, and copy_to_user(). If copy_to_user() fails,
remove the mapping from the list and release the reference while
still holding the lock.
Fix these issues by properly handling all error cases. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: pl353: fix probe resource allocation
During probe(), the devm_ioremap() is called with the parent device
instead of the current one. So when the module is unloaded, the register
area isn't released.
Target the pl35x device in the devm_ioremap() instead of its parent. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tridentfb: fix potential memory leak in trident_pci_probe()
In trident_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: release pages on atomic dio size mismatch
If bio_iov_iter_get_pages() or the bounce helper succeeds but builds a
short bio, the REQ_ATOMIC size check rejects it before submission. The
old error path only dropped the bio reference, leaving any pages already
attached to the bio unreleased.
Release or unbounce the pages before falling through to out_put_bio on
this error path.
This bug was reported by sashiko:
https://sashiko.dev/#/patchset/20260608073134.95964-1-changfengnan%40bytedance.com |
| NCalc is a fast, lightweight expression evaluator for .NET. Prior to 6.1.1, the factorial operator implementation in src/NCalc.Core/Helpers/MathHelper.cs permits specially crafted expressions with extremely large factorial operands, causing excessive CPU consumption or a non-terminating loop due to integer overflow in the factorial calculation logic when applications evaluate untrusted expressions. This issue is fixed in version 6.1.1. |
| Uncontrolled Resource Consumption vulnerability in ninenines gun (gun_http module) allows a malicious server to exhaust client memory via unbounded HTTP/1.1 response buffering.
In gun_http:handle/5, three clauses accumulate incoming TCP data into the connection's buffer field using binary concatenation with no upper-bound check: the head clause appends data until the \r\n\r\n header terminator is found; the body_chunked clause appends data whenever cow_http_te:stream_chunked/2 returns a more result indicating an incomplete chunk boundary; and the body_trailer clause appends data until the trailing \r\n\r\n is found. In each case, when the expected terminator never arrives, the enlarged binary is stored back into state and the process waits for more data, with no configurable or hard-coded ceiling on buffer size.
A malicious or compromised server can exploit this by sending a partial response that never completes. For example, a response may begin with HTTP/1.1 200 OK\r\nX-Pad: followed by an unbounded stream of arbitrary bytes, never sending the header terminator. The gun connection process will continuously append the incoming data to its buffer, causing unbounded heap growth. Because BEAM imposes no per-process heap limit by default, a single malicious connection can exhaust all available memory on the node, causing a node-wide out-of-memory crash.
This issue affects gun: from 1.0.0 before 2.4.0. |
| ArcadeDB before 26.8.1 contains a denial of service vulnerability in the Cypher range() function that allows authenticated users to exhaust server heap memory. Attackers can submit oversized range() expressions with large bounds to trigger OutOfMemoryError and cause temporary service degradation or unavailability. |
| A flaw has been found in COMFAST CF-N1-S 2.6.0.1. This impacts the function sub_44B438 of the file /cgi-bin/mbox-config?method=SET§ion=ptest_ssid of the component CGI Interface. This manipulation of the argument ssid causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. |
| A security vulnerability has been detected in GL.iNet BE9300 and MT6000 4.8.x. This vulnerability affects unknown code of the component Firewall-management RPC. The manipulation of the argument dest_port/dest_ip leads to os command injection. The attack may be initiated remotely. Upgrading to version 4.9.0 is able to resolve this issue. The affected component should be upgraded. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| A flaw has been found in Edimax EW-7478APC 1.04. Affected by this vulnerability is the function setWAN of the file /goform/setWAN. Executing a manipulation of the argument pppUserName/pptpUserName/L2TPUserName can lead to command injection. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: topology: fix memory leak in snd_sof_load_topology
When the topology filename contains "dummy" and tplg_cnt is 0, the
function returns -EINVAL directly without freeing the tplg_files
allocated by kcalloc() at line 2497. This leaks memory on every
such topology load attempt.
Fix this by setting ret = -EINVAL and jumping to the out: label,
which already handles the kfree(tplg_files) cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: uvesafb: fix potential memory leak in uvesafb_probe()
Due to an incorrect goto label, memory allocated for modedb and modelist
in uvesafb_vbe_init() is not freed in some error paths. Fix this by
updating the goto label. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix missing credit release on failure in cifs_issue_read()
Fix missing release of credits in the failure path in cifs_issue_read()
lest retrying the subreq just overwrites the credits value. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure
The cached-file path in nlm_lookup_file() reaches the found: label
unconditionally, even when nlm_do_fopen() fails. At that label
*result and file->f_count are updated before the error is returned.
The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then
bail out of their switch without copying *result back to their
caller, so the proc handler's local nlm_file pointer remains NULL
and the cleanup path skips nlm_release_file(). The f_count
increment is never released, and nlm_traverse_files() can no
longer reap the file because its refcount never returns to zero
between requests.
Short-circuit the cached path so neither *result nor f_count is
touched when nlm_do_fopen() fails on a hashed nlm_file. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: avoid request storms during pending request
batadv_send_tt_request() allocates a tt_req_node when none exists for the
destination originator node. This should prevent that a multiple TT
requests are send at the same time to an originator.
But if allocation of the send buffer failed, this request must be cleaned
up again. But indicator for such a failure is "ret == false". But the
actual implementation is checking for "ret == true".
The check must be inverted to not loose the information about the TT
request directly after it was attempted to be sent out. This should avoid
potential request storms. |
| An authenticated administrator is able to crash Zabbix server or proxy by creating specifically crafted preprocessing/script item JavaScript scripts, leading to potential denial of service. |
| Scriban versions 3.0.0 through 7.2.0 contain a denial of service vulnerability in the array multiplication operator that allocates memory without enforcing LoopLimit or overflow-safe arithmetic checks. Attackers can supply a large integer multiplier in a template to force multi-gigabyte memory allocations, causing resource exhaustion and availability degradation. |
| Improper neutralization of special elements used in a command ('command injection') in Microsoft PowerShell allows an authorized attacker to execute code locally. |
| vLLM is an inference and serving engine for large language models. Prior to 0.26.0, the /v1/completions/derender and /v1/chat/completions/derender endpoints accept caller-supplied GenerateResponse objects whose generate_responses, choices, token_ids, prompt_logprobs, logprobs.content, top_logprobs, and routed_experts structures are processed by OnlineDerenderer and tokenizer.decode before max_model_len, max_tokens, max_num_seqs, or response-size limits are enforced, allowing an authenticated API client to consume excessive CPU and memory and produce oversized responses. This issue is fixed in version 0.26.0. |
