| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/1.1 chunked body reader of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory and CPU via a request body made of many 1-byte chunks.
The chunked reader in lib/bandit/http1/socket.ex keeps every chunk as its own list cell and binary term until IO.iodata_to_binary/1 joins them, and nothing limits the number of chunks. The :length option of read_body/2 counts only data bytes, so tiny chunks cost far more memory than their payload: 48 MB of 1-byte chunks grew one handler process to about 500 MB and took about 6 s of CPU. The route does not need to read the body, because on keep-alive connections ensure_completed/1 drains unread bodies through the same reader.
This issue affects bandit: from 0.1.0 before 1.14.0. |
| Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to grow per-connection memory and CPU cost without bound via a large SETTINGS_HEADER_TABLE_SIZE. Bandit resizes its HPACK encoder table to whatever size the client advertises, up to 2^32-1 bytes, and indexes response headers into it. Because responses carry distinct values such as date or content-length, nothing is evicted and the table grows with every response for the life of the connection, while each lookup scans it linearly.
The SETTINGS handling in Bandit.HTTP2.Connection (lib/bandit/http2/connection.ex) passes remote_settings.header_table_size to HPAX.resize/2 with no server-side cap, and encode_headers encodes every response header as :store. Serving N responses on one connection therefore costs O(N²) CPU in the connection process.
This issue affects bandit: from 0.3.6 before 1.14.0. |
| Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via DATA frames sent past the advertised receive window. The attacker requests a response larger than the 65,535-byte initial window and withholds WINDOW_UPDATE, so the stream process blocks while sending and stops reading, then floods small DATA frames on that stream. Every frame is queued in the stream's mailbox until the BEAM node runs out of memory.
Bandit.HTTP2.Connection.handle_frame/3 in lib/bandit/http2/connection.ex forwards each DATA frame to the stream process without consulting the receive window, and Bandit.HTTP2.FlowControl.compute_recv_window/2 replenishes the window as data arrives rather than as it is consumed, and never answers a violation with FLOW_CONTROL_ERROR.
This issue affects bandit: from 0.3.1 before 1.14.0. |
| A vulnerability was identified in Sunwood-ai-labs github-kanban-mcp-server up to 0.4.0. Impacted is the function handleListIssues of the file src/handlers/issue-handlers.ts. Such manipulation of the argument state/labels leads to os command injection. The attack can be launched remotely. Upgrading to version 0.4.1 is recommended to address this issue. The name of the patch is 253d93bbdf7ee9fe42bd8fdf15feea93ae59cbae. It is suggested to upgrade the affected component. |
| A flaw has been found in Ahsay AhsayCBS up to 9.15.2.69/10.3.4.44. This vulnerability affects unknown code of the file /rps/api/json/UpdateReceivers.do of the component Replication Receiver. Executing a manipulation of the argument random can lead to os command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. Upgrading to version 9.15.2.70 and 10.3.4.45 is able to resolve this issue. Upgrading the affected component is advised. The initial patch did not fix the security vulnerability properly. An update of the CVE entry to reflect this became necessary. |
| Uncontrolled resource allocation in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server allocate a large amount of memory via sending a crafted mcpack request with a huge array item count.
Root Cause:
The bRPC mcpack2pb parser trusts the item count stored in the mcpack array header without validating it against the actual payload size. The code generated by the mcpack2pb protoc plugin uses this count to preallocate memory for repeated protobuf fields via Reserve(). A malformed request declaring item_count = 0x7fffffff can force the server to preallocate about 16GB of virtual memory, which may abort the process (SIGABRT) on memory-constrained hosts.
Affected Scenarios:
Use a bRPC server that wires a NsheadService to UbrpcMcpack2Adaptor (the Baidu ubrpc deployment pattern) and parses requests with code generated by the mcpack2pb protoc plugin. The request body is parsed before authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3451
Note:
No matter which option you choose, you should know that the fix caps the array item count to the remaining bytes of the array payload. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit a vulnerability in the `/ipa/i18n_messages` endpoint by sending an arbitrarily large request body. This can cause the service to consume excessive memory, leading to memory exhaustion, degraded responsiveness, and a denial of service (DoS) condition. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v5: Immediately exec priority drop following activate
With GICv5 an interrupt of equal or lower priority cannot be signalled
until there has been a priority drop. This is done via the GIC CDEOI
system instruction. Once this has been executed, the hardware is able
to signal the next interrupt if there is one.
As all interrupts are programmed to have the same priority, no new
interrupts can be signalled until the priority drop has happened. This
can cause issues when, for example, an interrupt remains active while
a long running process takes place, such as when injecting a physical
interrupt into a guest VM in software.
The GICv5 driver has so far done the priority drop as part of
irq_eoi(), i.e., at the same time as deactivating the interrupt. This
means that any long running process (or VM) could block incoming
interrupts, effectively causing a denial of service for all other
interrupts.
Rather than doing the EOI as part of irq_eoi() (which the name would
suggest would be a good place for it), move it to happen immediately
after acknowledging an interrupt in the main GICv5 interrupt
handler. The deactivation of interrupts (GIC CDDI) remains implemented
as part of irq_eoi(), which means that the same interrupt cannot be
signalled a second time until deactivated by software. |
| Print Assumptions does not report that a definition was produced while universe checking was disabled when that definition reaches the caller through Parameter Inline in a module type. Applying a functor inlines the body of the parameter, and the inlining drops the record that the term was built under Unset Universe Checking, so the resulting constant carries no trace of the unsafe operation. A module implementation can therefore prove False using a universe inconsistency, expose it through an inlined parameter, and have Print Assumptions report the dependent proof as closed under the global context. Because Print Assumptions is the in-process audit used to confirm that a development rests on no unexpected assumptions, a dependency built this way passes that audit while proving arbitrary propositions. The standalone checker coqchk does reject the resulting compiled file. The project records this in dev/doc/critical-bugs.md under non-fixed bugs and rates the risk as moderate when coqchk is not used. |
| An issue was discovered in LibreNMS 1.65. A remote authenticated attacker with normal privileges can execute arbitrary shell commands through a command injection in the /graph.php API endpoint. |
| GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the set_config function. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| D-Link DCS-932L v2.18.01 is vulnerable to Command Injection in the function sub_42EF14 of the file /bin/alphapd. The manipulation of the argument LightSensorControl leads to command injection. |
| GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the string port parameter in the enable_echo_server function. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| NVIDIA UFM Enterprise contains a vulnerability in the IBDiagnet API where an authenticated attacker with administrative privileges may cause command injection by sending crafted API requests. A successful exploit of this vulnerability may lead to code execution, escalation of privileges and information disclosure. |
| GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the module parameter in the M.get_system_log function. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| ImageMagick before 7.1.2-33 contains a memory leak vulnerability in the MAT decoder that fails to release allocated memory in a specific error path. Attackers can supply crafted MAT files that trigger this error path repeatedly, causing small memory leaks that gradually consume process memory. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak on error descriptor
When the error bit is set in the RX completion descriptor, the buf_state
and its attached buffer should be freed. In the case of AF_XDP ZC, the
XSK buffer was not freed, leading to a leak.
This issue was caught by LLM. |
| Uncontrolled resource consumption in RPC Endpoint Mapper Service allows an unauthorized attacker to deny service over a network. |
| OW2 ASM 3.0 before 9.11 contains a quadratic memory allocation vulnerability in MethodWriter.computeMaxStackAndLocal() and computeAllFrames() when using COMPUTE_MAXS or COMPUTE_FRAMES. Attackers can supply a crafted class file with thousands of overlapping exception handlers, causing excessive Edge allocations and an OutOfMemoryError that crashes the JVM. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix objects stuck in free_by_rcu_ttrace
do_call_rcu_ttrace() returns early when call_rcu_ttrace_in_progress is set
and leaves the objects in free_by_rcu_ttrace. __free_rcu() frees
waiting_for_gp_ttrace only and clears the flag. Hence the objects that
free_bulk() or __free_by_rcu() added while RCU tasks trace GP was in flight
stay in free_by_rcu_ttrace until free_bulk() or alloc_bulk() is called for
the same bpf_mem_cache again, which may never happen. The number of such
objects is not bounded.
Turn call_rcu_ttrace_in_progress into three states:
0 - idle
1 - __free_rcu() is queued
2 - __free_rcu() is queued and free_by_rcu_ttrace got more objects since
do_call_rcu_ttrace() sets 2. __free_rcu() does cmpxchg(1 -> 0) and starts
the next GP when it fails. It cannot clear the flag first and check
free_by_rcu_ttrace later, since bpf_mem_alloc_destroy() frees bpf_mem_cache
without waiting for RCU callbacks when the flag is zero.
Now __free_rcu() queues itself, so the one that didn't see 'draining' may
do call_rcu_tasks_trace() after rcu_barrier_tasks_trace() in
free_mem_alloc(). Queue it under rcu_read_lock() and do synchronize_rcu()
before the barriers. Calling rcu_barrier_tasks_trace() twice works too, but
creating and destroying hash maps in a loop on many cpus slows down to one
free_mem_alloc() per GP and kworkers pile up. |
