| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability classified as critical has been found in Sony SNC-M1, SNC-M3, SNC-RZ25N, SNC-RZ30N, SNC-DS10, SNC-CS3N and SNC-RX570N up to 1.30. This affects an unknown part of the component Administrative Interface. The manipulation leads to use of default credentials. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. It is recommended to change the configuration settings. The vendor was contacted early about this issue. They confirmed the existence but pointed out that they "have published the 'Hardening Guide' on the Web from July 2018 to January 2025 and have thoroughly informed customers of the recommendation to change their initial passwords". |
| The use of a weak cryptographic key pair in the signature verification process in WPS Office (Kingsoft) on Windows allows an attacker who successfully recovered the private key to sign components.
As older versions of WPS Office did not validate the update server's certificate, an Adversary-In-The-Middle attack was possible allowing updates to be hijacked. |
| WebPageTest version 2.6 and earlier contains an arbitrary file upload vulnerability in the resultimage.php script. The application fails to validate or sanitize user-supplied input before saving uploaded files to a publicly accessible directory. This flaw allows remote attackers to upload and execute arbitrary PHP code, resulting in full remote code execution under the web server context. |
| Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in warmcat libwebsockets allows Pointer Manipulation, potentially leading to out-of-bounds memory access. This issue affects libwebsockets before 4.3.4 and is present in code built specifically for the Win32 platform.
By default, the affected code is not executed unless one of the following conditions is met:
LWS_WITHOUT_EXTENSIONS (default ON) is manually set to OFF in CMake.
LWS_WITH_HTTP_STREAM_COMPRESSION (default OFF) is manually set to ON in CMake.
Despite these conditions, when triggered in affected configurations, this vulnerability may allow attackers to manipulate pointers, potentially leading to memory corruption or unexpected behavior. |
| A vulnerability has been identified in SIMATIC Virtualization as a Service (SIVaaS) (All versions). The affected application exposes a network share without any authentication. This could allow an attacker to access or alter sensitive data without proper authorization. |
| A remote attacker with web administrator privileges can exploit the device’s web interface to execute arbitrary system commands through the NTP settings. Successful exploitation may result in the device entering an infinite reboot loop, leading to a total or partial denial of connectivity for downstream systems that rely on its network services. |
| The affected product does not limit the number of attempts for inputting
the correct PIN for a registered product, which may allow an attacker
to gain unauthorized access using brute-force methods if they possess a
valid device serial number. The API provides clear feedback when the
correct PIN is entered. This vulnerability was patched in a server-side
update on April 6, 2025. |
| An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC. |
| DBLTek GoIP devices (models GoIP 1, 4, 8, 16, and 32) contain an undocumented vendor backdoor in the Telnet administrative interface that allows remote authentication as an undocumented user via a proprietary challenge–response scheme which is fundamentally flawed. Because the challenge response can be computed from the challenge itself, a remote attacker can authenticate without knowledge of a secret and obtain a root shell on the device. This can lead to persistent remote code execution, full device compromise, and arbitrary control of the device and any managed services. The firmware used within these devices was updated in December 2016 to make this vulnerability more complex to exploit. However, it is unknown if DBLTek has taken steps to fully mitigate. |
| Telenium Online Web Application is vulnerable due to a Perl script that
is called to load the login page. Due to improper input validation, an
attacker can inject arbitrary Perl code through a crafted HTTP request,
leading to remote code execution on the server. |
| BYTEVALUE Intelligent Flow Control Router contains a command injection vulnerability via the /goform/webRead/open endpoint. The `path` parameter is not properly validated and is echoed into a shell context, allowing an attacker to inject and execute arbitrary shell commands on the device. Successful exploitation can lead to writing backdoors, privilege escalation on the host, and full compromise of the router and its management functions. VulnCheck has observed this vulnerability being targeted by the RondoDox botnet campaign. |
| The ICTBroadcast application unsafely passes session cookie data to shell processing, allowing an attacker to inject shell commands into a session cookie that get executed on the server. This results in unauthenticated remote code execution in the session handling.
Versions 7.4 and below are known to be vulnerable. |
| A template injection vulnerability exists in Sawtooth Software’s Lighthouse Studio versions prior to 9.16.14 via the ciwweb.pl http://ciwweb.pl/ Perl web application. Exploitation allows an unauthenticated attacker can execute arbitrary commands. |
| In versions before 20.0.2, it was found that --disallow-code-generation-from-strings is not sufficient for isolating untrusted JavaScript in happy-dom. The untrusted script and the rest of the application still run in the same Isolate/process, so attackers can deploy prototype pollution payloads to hijack important references like "process" in the example below, or to hijack control flow via flipping checks of undefined property. This vulnerability is due to an incomplete fix for CVE-2025-61927. The vulnerability is fixed in 20.0.2. |
| Certain modem models developed by Askey has a Stack-based Buffer Overflow vulnerability, allowing unauthenticated remote attackers to control the program's execution flow and potentially execute arbitrary code. |
| A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced.
Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided.
This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake.
The issue affects versions up to and including 5.8.2. |
| Auth0-PHP is a PHP SDK for Auth0 Authentication and Management APIs. Versions 8.0.0-BETA3 prior to 8.3.1 contain a vulnerability due to insecure deserialization of cookie data. If exploited, since SDKs process cookie content without prior authentication, a threat actor could send a specially crafted cookie containing malicious serialized data. Applications using the Auth0-PHP SDK are affected, as are applications using the Auth0/symfony, Auth0/laravel-auth0, or Auth0/wordpress SDKs, because those SDKsrely on the Auth0-PHP SDK versions from 8.0.0-BETA3 until 8.14.0. Version 8.3.1 contains a patch for the issue. |
| The WordPress plugin is-human <= v1.4.2 contains an eval injection vulnerability in /is-human/engine.php that can be triggered via the 'type' parameter when the 'action' parameter is set to 'log-reset'. The root cause is unsafe use of eval() on user-controlled input, which can lead to execution of attacker-supplied PHP and OS commands. This may result in arbitrary code execution as the webserver user, site compromise, or data exfiltration. The is-human plugin was made defunct in June 2008 and is no longer available for download. This vulnerability was exploited in the wild in March 2012. |
| SQL injection vulnerability in Joomla module mod_vvisit_counter v2.0.4j3. This vulnerability allows an attacker to retrieve database content via the ‘cip_vvisitcounter’ cookie at all endpoints where the plugin counts visits. |
| pREST (PostgreSQL REST), is an API that delivers an application on top of a Postgres database. SQL injection is possible in versions prior to 2.0.0-rc3. The validation present in versions prior to 2.0.0-rc3 does not provide adequate protection from injection attempts. Version 2.0.0-rc3 contains a patch to mitigate such attempts. |
