| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix unremoved procfs host directory regression
Commit fc663711b944 ("scsi: core: Remove the /proc/scsi/${proc_name}
directory earlier") fixed a bug related to modules loading/unloading, by
adding a call to scsi_proc_hostdir_rm() on scsi_remove_host(). But that led
to a potential duplicate call to the hostdir_rm() routine, since it's also
called from scsi_host_dev_release(). That triggered a regression report,
which was then fixed by commit be03df3d4bfe ("scsi: core: Fix a procfs host
directory removal regression"). The fix just dropped the hostdir_rm() call
from dev_release().
But it happens that this proc directory is created on scsi_host_alloc(),
and that function "pairs" with scsi_host_dev_release(), while
scsi_remove_host() pairs with scsi_add_host(). In other words, it seems the
reason for removing the proc directory on dev_release() was meant to cover
cases in which a SCSI host structure was allocated, but the call to
scsi_add_host() didn't happen. And that pattern happens to exist in some
error paths, for example.
Syzkaller causes that by using USB raw gadget device, error'ing on
usb-storage driver, at usb_stor_probe2(). By checking that path, we can see
that the BadDevice label leads to a scsi_host_put() after a SCSI host
allocation, but there's no call to scsi_add_host() in such path. That leads
to messages like this in dmesg (and a leak of the SCSI host proc
structure):
usb-storage 4-1:87.51: USB Mass Storage device detected
proc_dir_entry 'scsi/usb-storage' already registered
WARNING: CPU: 1 PID: 3519 at fs/proc/generic.c:377 proc_register+0x347/0x4e0 fs/proc/generic.c:376
The proper fix seems to still call scsi_proc_hostdir_rm() on dev_release(),
but guard that with the state check for SHOST_CREATED; there is even a
comment in scsi_host_dev_release() detailing that: such conditional is
meant for cases where the SCSI host was allocated but there was no calls to
{add,remove}_host(), like the usb-storage case.
This is what we propose here and with that, the error path of usb-storage
does not trigger the warning anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/trigger: Fix to return error if failed to alloc snapshot
Fix register_snapshot_trigger() to return error code if it failed to
allocate a snapshot instead of 0 (success). Unless that, it will register
snapshot trigger without an error. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix fortify source warning while accessing Eth segment
------------[ cut here ]------------
memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2)
WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy
[last unloaded: mlx_compat(OE)]
CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7
RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8
R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80
FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0x72/0x90
? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
? __warn+0x8d/0x160
? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
? report_bug+0x1bb/0x1d0
? handle_bug+0x46/0x90
? exc_invalid_op+0x19/0x80
? asm_exc_invalid_op+0x1b/0x20
? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib]
ipoib_send+0x2ec/0x770 [ib_ipoib]
ipoib_start_xmit+0x5a0/0x770 [ib_ipoib]
dev_hard_start_xmit+0x8e/0x1e0
? validate_xmit_skb_list+0x4d/0x80
sch_direct_xmit+0x116/0x3a0
__dev_xmit_skb+0x1fd/0x580
__dev_queue_xmit+0x284/0x6b0
? _raw_spin_unlock_irq+0xe/0x50
? __flush_work.isra.0+0x20d/0x370
? push_pseudo_header+0x17/0x40 [ib_ipoib]
neigh_connected_output+0xcd/0x110
ip_finish_output2+0x179/0x480
? __smp_call_single_queue+0x61/0xa0
__ip_finish_output+0xc3/0x190
ip_finish_output+0x2e/0xf0
ip_output+0x78/0x110
? __pfx_ip_finish_output+0x10/0x10
ip_local_out+0x64/0x70
__ip_queue_xmit+0x18a/0x460
ip_queue_xmit+0x15/0x30
__tcp_transmit_skb+0x914/0x9c0
tcp_write_xmit+0x334/0x8d0
tcp_push_one+0x3c/0x60
tcp_sendmsg_locked+0x2e1/0xac0
tcp_sendmsg+0x2d/0x50
inet_sendmsg+0x43/0x90
sock_sendmsg+0x68/0x80
sock_write_iter+0x93/0x100
vfs_write+0x326/0x3c0
ksys_write+0xbd/0xf0
? do_syscall_64+0x69/0x90
__x64_sys_write+0x19/0x30
do_syscall_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
When trying to use copy_from_kernel_nofault() to read vsyscall page
through a bpf program, the following oops was reported:
BUG: unable to handle page fault for address: ffffffffff600000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:copy_from_kernel_nofault+0x6f/0x110
......
Call Trace:
<TASK>
? copy_from_kernel_nofault+0x6f/0x110
bpf_probe_read_kernel+0x1d/0x50
bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d
trace_call_bpf+0xc5/0x1c0
perf_call_bpf_enter.isra.0+0x69/0xb0
perf_syscall_enter+0x13e/0x200
syscall_trace_enter+0x188/0x1c0
do_syscall_64+0xb5/0xe0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
......
---[ end trace 0000000000000000 ]---
The oops is triggered when:
1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall
page and invokes copy_from_kernel_nofault() which in turn calls
__get_user_asm().
2) Because the vsyscall page address is not readable from kernel space,
a page fault exception is triggered accordingly.
3) handle_page_fault() considers the vsyscall page address as a user
space address instead of a kernel space address. This results in the
fix-up setup by bpf not being applied and a page_fault_oops() is invoked
due to SMAP.
Considering handle_page_fault() has already considered the vsyscall page
address as a userspace address, fix the problem by disallowing vsyscall
page read for copy_from_kernel_nofault(). |
| In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed
If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER
handler cannot perform VF register successfully as the register call
is received before netvsc_probe is finished. This is because we
register register_netdevice_notifier() very early( even before
vmbus_driver_register()).
To fix this, we try to register each such matching VF( if it is visible
as a netdevice) at the end of netvsc_probe. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mmci: stm32: fix DMA API overlapping mappings warning
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning:
DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST,
overlapping mappings aren't supported
WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568
add_dma_entry+0x234/0x2f4
Modules linked in:
CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1
Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT)
Workqueue: events_freezable mmc_rescan
Call trace:
add_dma_entry+0x234/0x2f4
debug_dma_map_sg+0x198/0x350
__dma_map_sg_attrs+0xa0/0x110
dma_map_sg_attrs+0x10/0x2c
sdmmc_idma_prep_data+0x80/0xc0
mmci_prep_data+0x38/0x84
mmci_start_data+0x108/0x2dc
mmci_request+0xe4/0x190
__mmc_start_request+0x68/0x140
mmc_start_request+0x94/0xc0
mmc_wait_for_req+0x70/0x100
mmc_send_tuning+0x108/0x1ac
sdmmc_execute_tuning+0x14c/0x210
mmc_execute_tuning+0x48/0xec
mmc_sd_init_uhs_card.part.0+0x208/0x464
mmc_sd_init_card+0x318/0x89c
mmc_attach_sd+0xe4/0x180
mmc_rescan+0x244/0x320
DMA API debug brings to light leaking dma-mappings as dma_map_sg and
dma_unmap_sg are not correctly balanced.
If an error occurs in mmci_cmd_irq function, only mmci_dma_error
function is called and as this API is not managed on stm32 variant,
dma_unmap_sg is never called in this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
sr9800: Add check for usbnet_get_endpoints
Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events
After the blamed commit, we started doing this dereference for every
NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system.
static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev)
{
struct dsa_user_priv *p = netdev_priv(dev);
return p->dp;
}
Which is obviously bogus, because not all net_devices have a netdev_priv()
of type struct dsa_user_priv. But struct dsa_user_priv is fairly small,
and p->dp means dereferencing 8 bytes starting with offset 16. Most
drivers allocate that much private memory anyway, making our access not
fault, and we discard the bogus data quickly afterwards, so this wasn't
caught.
But the dummy interface is somewhat special in that it calls
alloc_netdev() with a priv size of 0. So every netdev_priv() dereference
is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event
with a VLAN as its new upper:
$ ip link add dummy1 type dummy
$ ip link add link dummy1 name dummy1.100 type vlan id 100
[ 43.309174] ==================================================================
[ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8
[ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374
[ 43.330058]
[ 43.342436] Call trace:
[ 43.366542] dsa_user_prechangeupper+0x30/0xe8
[ 43.371024] dsa_user_netdevice_event+0xb38/0xee8
[ 43.375768] notifier_call_chain+0xa4/0x210
[ 43.379985] raw_notifier_call_chain+0x24/0x38
[ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8
[ 43.389120] netdev_upper_dev_link+0x70/0xa8
[ 43.393424] register_vlan_dev+0x1bc/0x310
[ 43.397554] vlan_newlink+0x210/0x248
[ 43.401247] rtnl_newlink+0x9fc/0xe30
[ 43.404942] rtnetlink_rcv_msg+0x378/0x580
Avoid the kernel oops by dereferencing after the type check, as customary. |
| linux-pam (aka Linux PAM) before 1.6.0 allows attackers to cause a denial of service (blocked login process) via mkfifo because the openat call (for protect_dir) lacks O_DIRECTORY. |
| Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL
to crash leading to a potential Denial of Service attack
Impact summary: Applications loading files in the PKCS12 format from untrusted
sources might terminate abruptly.
A file in PKCS12 format can contain certificates and keys and may come from an
untrusted source. The PKCS12 specification allows certain fields to be NULL, but
OpenSSL does not correctly check for this case. This can lead to a NULL pointer
dereference that results in OpenSSL crashing. If an application processes PKCS12
files from an untrusted source using the OpenSSL APIs then that application will
be vulnerable to this issue.
OpenSSL APIs that are vulnerable to this are: PKCS12_parse(),
PKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes()
and PKCS12_newpass().
We have also fixed a similar issue in SMIME_write_PKCS7(). However since this
function is related to writing data we do not consider it security significant.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: A bug has been identified in the processing of key and
initialisation vector (IV) lengths. This can lead to potential truncation
or overruns during the initialisation of some symmetric ciphers.
Impact summary: A truncation in the IV can result in non-uniqueness,
which could result in loss of confidentiality for some cipher modes.
When calling EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or
EVP_CipherInit_ex2() the provided OSSL_PARAM array is processed after
the key and IV have been established. Any alterations to the key length,
via the "keylen" parameter or the IV length, via the "ivlen" parameter,
within the OSSL_PARAM array will not take effect as intended, potentially
causing truncation or overreading of these values. The following ciphers
and cipher modes are impacted: RC2, RC4, RC5, CCM, GCM and OCB.
For the CCM, GCM and OCB cipher modes, truncation of the IV can result in
loss of confidentiality. For example, when following NIST's SP 800-38D
section 8.2.1 guidance for constructing a deterministic IV for AES in
GCM mode, truncation of the counter portion could lead to IV reuse.
Both truncations and overruns of the key and overruns of the IV will
produce incorrect results and could, in some cases, trigger a memory
exception. However, these issues are not currently assessed as security
critical.
Changing the key and/or IV lengths is not considered to be a common operation
and the vulnerable API was recently introduced. Furthermore it is likely that
application developers will have spotted this problem during testing since
decryption would fail unless both peers in the communication were similarly
vulnerable. For these reasons we expect the probability of an application being
vulnerable to this to be quite low. However if an application is vulnerable then
this issue is considered very serious. For these reasons we have assessed this
issue as Moderate severity overall.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this because
the issue lies outside of the FIPS provider boundary.
OpenSSL 3.1 and 3.0 are vulnerable to this issue. |
| This flaw allows a malicious HTTP server to set "super cookies" in curl that
are then passed back to more origins than what is otherwise allowed or
possible. This allows a site to set cookies that then would get sent to
different and unrelated sites and domains.
It could do this by exploiting a mixed case flaw in curl's function that
verifies a given cookie domain against the Public Suffix List (PSL). For
example a cookie could be set with `domain=co.UK` when the URL used a lower
case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain. |
| This flaw allows an attacker to insert cookies at will into a running program
using libcurl, if the specific series of conditions are met.
libcurl performs transfers. In its API, an application creates "easy handles"
that are the individual handles for single transfers.
libcurl provides a function call that duplicates en easy handle called
[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).
If a transfer has cookies enabled when the handle is duplicated, the
cookie-enable state is also cloned - but without cloning the actual
cookies. If the source handle did not read any cookies from a specific file on
disk, the cloned version of the handle would instead store the file name as
`none` (using the four ASCII letters, no quotes).
Subsequent use of the cloned handle that does not explicitly set a source to
load cookies from would then inadvertently load cookies from a file named
`none` - if such a file exists and is readable in the current directory of the
program using libcurl. And if using the correct file format of course. |
| An information leakage was addressed with additional validation. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.4 and iPadOS 26.4, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An app may be able to access sensitive user data. |
| This issue was addressed with improved checks. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.4 and iPadOS 26.4, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An app may be able to enumerate a user's installed apps. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei
It looks element length declared in servreg_loc_pfr_req_ei for reason
not matching servreg_loc_pfr_req's reason field due which we could
observe decoding error on PD crash.
qmi_decode_string_elem: String len 81 >= Max Len 65
Fix this by matching with servreg_loc_pfr_req's reason field. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: Fix error handling on steps after finding a match
Once an async connection is found to be matching with an fwnode, a
sub-device may be registered (in case it wasn't already), its bound
operation is called, ancillary links are created, the async connection
is added to the sub-device's list of connections and removed from the
global waiting connection list. Further on, the sub-device's possible own
notifier is searched for possible additional matches.
Fix these specific issues:
- If v4l2_async_match_notify() failed before the sub-notifier handling,
the async connection was unbound and its entry removed from the
sub-device's async connection list. The latter part was also done in
v4l2_async_match_notify().
- The async connection's sd field was only set after creating ancillary
links in v4l2_async_match_notify(). It was however dereferenced in
v4l2_async_unbind_subdev_one(), which was called on error path of
v4l2_async_match_notify() failure. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback
aml_sfc_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: do not propagate page array emplacement errors as batch errors
When fscrypt is enabled, move_dirty_folio_in_page_array() may fail
because it needs to allocate bounce buffers to store the encrypted
versions of each folio. Each folio beyond the first allocates its bounce
buffer with GFP_NOWAIT. Failures are common (and expected) under this
allocation mode; they should flush (not abort) the batch.
However, ceph_process_folio_batch() uses the same `rc` variable for its
own return code and for capturing the return codes of its routine calls;
failing to reset `rc` back to 0 results in the error being propagated
out to the main writeback loop, which cannot actually tolerate any
errors here: once `ceph_wbc.pages` is allocated, it must be passed to
ceph_submit_write() to be freed. If it survives until the next iteration
(e.g. due to the goto being followed), ceph_allocate_page_array()'s
BUG_ON() will oops the worker.
Note that this failure mode is currently masked due to another bug
(addressed next in this series) that prevents multiple encrypted folios
from being selected for the same write.
For now, just reset `rc` when redirtying the folio to prevent errors in
move_dirty_folio_in_page_array() from propagating. Note that
move_dirty_folio_in_page_array() is careful never to return errors on
the first folio, so there is no need to check for that. After this
change, ceph_process_folio_batch() no longer returns errors; its only
remaining failure indicator is `locked_pages == 0`, which the caller
already handles correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
dm mpath: Add missing dm_put_device when failing to get scsi dh name
When commit fd81bc5cca8f ("scsi: device_handler: Return error pointer in
scsi_dh_attached_handler_name()") added code to fail parsing the path if
scsi_dh_attached_handler_name() failed with -ENOMEM, it didn't clean up
the reference to the path device that had just been taken. Fix this, and
steamline the error paths of parse_path() a little. |
