| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM PowerVM Hypervisor FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H1 A carefully crafted OS hypervisor call can cause the PowerVM hypervisor to crash or compromise OS memory integrity. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to a stack-based buffer overflow. |
| GNU coreutils unexpand is vulnerable to a heap-based buffer overflow due to an integer overflow during buffer allocation when processing large tab stop (-t) values. The multiplication used to calculate the allocation size can wrap around, resulting in an undersized buffer.
When processing crafted input, subsequent writes exceed the allocated memory, leading to an out‑of‑bounds heap write.
When running GNU coreutils unexpand with attacker-provided large tab stop (-t) arguments, this behavior leads to a crash and potentially achieve a heap write primitive depending on memory layout.
This issue has been fixed in the commit b60a159fdc5bfcf9988d3a4cb6f53abe8ad5d35d |
| GNU coreutils uniq is vulnerable to an out‑of‑bounds read due to incorrect handling of multibyte input when the -w (--check-chars) option is used. The find_field() function miscalculates the byte length of characters by repeatedly processing a fixed pointer instead of advancing through the input, resulting in an inflated length value.
This incorrect length is later used in a memcmp operation, causing reads beyond the allocated buffer when processing crafted multibyte input.
When running GNU coreutils uniq with attacker-provided arguments, this behavior leads to a crash and potential adjacent heap memory exposure.
This issue has been fixed in the commit d64e35a8a4c0e4608321433e0d84d917e4e36371. |
| A stack-based buffer overflow vulnerability exists in the Dia diagram editor when processing Network Bus objects from Dia XML project files.
In objects/network/bus.c, bus_load() reads the number of bus handles from the file attribute "bus_handles" using attribute_num_data() without validating an upper bound:
bus->num_handles = attribute_num_data(attr);
When a bus handle is subsequently moved, bus_handle_moved() allocates two temporary arrays on the stack:
parallel = (real *)g_alloca(num_handles * sizeof(real));
perp = (real *)g_alloca(num_handles * sizeof(real));
Because num_handles is fully attacker-controlled via the project file, sufficiently large values (for example 262144 or higher) cause g_alloca() to consume more stack space than the default thread stack limit (typically 8 MB on Linux), resulting in stack overflow, SIGSEGV, and potential stack frame / return-address corruption.
An attacker can embed a Bus object with an excessive bus_handles count in a malicious .dia file. Exploitation requires the victim to open the file in Dia (file dialog, command line, or file association) and trigger handle manipulation (moving a bus handle), which exercises the vulnerable code path.
The identical g_alloca pattern is present in objects/Misc/tree.c (copied from bus.c) and is likely vulnerable to the same class of attack via Tree objects.
Affected versions: Dia 0.98.0 and earlier versions containing this code; issue confirmed on upstream master as of 2026-08-21.
Upstream report: https://gitlab.gnome.org/GNOME/dia/-/issues/581 |
| Vulnerability in the Siebel CRM Integration product of Oracle Siebel CRM (component: REST). Supported versions that are affected are 17.0-26.6. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel CRM Integration. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Siebel CRM Integration accessible data as well as unauthorized access to critical data or complete access to all Siebel CRM Integration accessible data. CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N). |
| OpenEXR is the reference implementation and specification for the EXR image file format, widely used in the motion picture industry. In versions 3.3.0 through 3.3.12 and 3.4.0 through 3.4.13, the PyOpenEXR Python bindings contain a heap out-of-bounds write triggered when reading a crafted deep scanline EXR file. When a deep file declares a literal channel named left alongside layer-prefixed RGB channels left.R, left.G, and left.B, the wrapper processes the literal left channel first and allocates a scalar deep sample array for it, then reuses that same array as the coalesced destination for the prefixed RGB group. The deep reader registers sample slices with an RGB stride (three lanes) into storage that was allocated with scalar shape, so decoding the deep samples writes past the allocation. Opening such a file through the default public Python API, OpenEXR.File(path), causes a heap buffer overflow during normal deep sample decode, leading to memory corruption and a crash. This issue is fixed in versions 3.3.13 and 3.4.14. |
| An out-of-bounds read/write vulnerability in the MessageParser::parseECSSTCHeader component of SpaceDot AcubeSAT OBC software commit eaf90ec allows attackers to cause a Denial of Service (DoS) via supplying a crafted CAN message. |
| Classic buffer overflow in the Erlang/OTP megaco flex scanner C driver allows a remote unauthenticated attacker to corrupt the driver's memory (and potentially achieve remote code execution or a denial-of-service crash) by sending a single text-encoded H.248/Megaco message containing an oversized property parm name.
When tokenizing a Local/Remote descriptor, mfs_load_property_groups extracts the attacker-controlled property name (bounded only by the message length) and, when no value follows, formats it into a fixed 512-byte error_msg field of the MfsErlDrvData struct using an unchecked sprintf call. Names longer than roughly 452 bytes overflow into the immediately following struct fields (text_buf, text_ptr, term_spec, term_spec_size, term_spec_index), overwriting live pointers and counters with attacker-chosen bytes. Subsequent scanner code writes and frees through the corrupted pointers, producing arbitrary write and arbitrary free primitives inside the BEAM VM process, which can be leveraged for remote code execution. On builds compiled with _FORTIFY_SOURCE the overflow is detected at runtime and terminates the process with SIGABRT, resulting in denial of service.
The overflow occurs in the flex scanner before any grammar or Megaco-level authentication processing, so exploitation requires only network reachability to the megaco transport port on a node configured with {scanner, flex}.
This vulnerability is associated with program files lib/megaco/src/flex/megaco_flex_scanner_drv.flex.src and program routines mfs_load_property_groups.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, from OTP 28.0 before OTP 28.5.0.4, and from OTP 29.0 before OTP 29.0.4, corresponding to megaco from 3.17.1 before 4.7.2.2, from 4.8 before 4.8.3.1, and from 4.9 before 4.9.1. Whether OTP before OTP 17.0, corresponding to megaco before 3.17.1, is affected is unknown. |
| NVIDIA DGX Spark contains a vulnerability in the standalone MM firmware where an attacker could be able to cause an out-of-bounds read. A successful exploit of this vulnerability might lead to information disclosure. |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot sequence. Other partitions and the managed system are not affected. Only partitions actively performing an iSCSI SAN network boot are affected, resulting in an availability impact. |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system. |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the service processor can write specially crafted configuration data, causing the host firmware boot stack to crash with possible memory corruption during system initialisation, resulting in an integrity and availability impact to the managed system. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 - OP940.81 (Power HMC) is affected by a vulnerability in host firmware configuration parsing. An attacker with service-level access to the BMC/FSP can supply specially crafted configuration data, compromising the host firmware boot stage and everything subsequently loaded by it, resulting in a confidentiality, integrity, and availability impact to the managed system. |
| IBM Power Systems Firmware FW1120.00, and FW1110.00 through FW1110.30 is affected by a vulnerability in the interface between the BMC and the host system. An attacker with service access to the BMC can send a specially crafted command, allowing arbitrary code to be executed on the host system, giving full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact. |
| IBM Server Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the FSP firmware update process. An attacker with authenticated administrator-level access to the FSP can, under specific conditions, execute arbitrary code, resulting in a confidentiality, integrity, and availability impact. |
| github.com/graphql-go/graphql (GraphQL for Go) through 0.8.1 does not validate that a scalar variable value matches its declared type. The built-in coerceString and coerceBool functions (scalars.go) accept input whose type does not match the declared String, ID, or Boolean scalar instead of raising the request error that the GraphQL specification mandates. In some cases (but not any typical case of JSON sent to a website), a deeply nested value leads to an unrecoverable "fatal error: stack overflow" condition. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. From version 3.4.0 through 3.4.12, the HTJ2K decoder parses a header-length field (PLEN) from a chunk's compressed data but never checks that this value fits within the available buffer before using it. When decoding, it advances the codestream pointer by the attacker-supplied header size and passes the resulting offset and remaining length to the OpenJPH memory-input path, so a crafted value pushes the pointer past the end of the buffer and causes an out-of-bounds read. Because this field comes straight from attacker-controlled EXR chunk data, the flaw is reachable during normal decoding of an untrusted file. This issue is fixed in version 3.4.13. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. OpenEXR versions 3.2.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 are vulnerable on ILP32 builds to a heap out-of-bounds read. The issue occurs when a crafted RLE-compressed EXR causes the 64-bit unpacked size to truncate before allocation in OpenEXRCore decoding.c and unpack_32bit() reads beyond the resulting buffer, allowing denial of service. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. |
| The Zephyr ext2 filesystem driver validates the on-disk block bitmap in ext2_init_fs() (subsys/fs/ext2/ext2_impl.c) by passing fs_blocks = s_blocks_count - s_first_data_block to ext2_bitmap_count_set(). That helper (subsys/fs/ext2/ext2_bitmap.c) treats its argument as a number of bits and reads one bitmap byte per eight bits, but the bitmap buffer (BGROUP_BLOCK_BITMAP) is a single fetched block of only fs->block_size bytes (capacity fs->block_size * 8 bits). s_blocks_count and s_first_data_block are taken verbatim from the superblock and were never bounded against this single-group capacity; ext2_verify_disk_superblock() checks the magic, revision, and block-size shift but not the block count.
A crafted ext2 image with an oversized s_blocks_count (up to ~4 billion, against a maximum 4096-byte block / 32768-bit bitmap) makes ext2_bitmap_count_set() scan roughly 512 MB of memory past the bitmap block — a large out-of-bounds read of the static block slab and adjacent memory.
The defect is reached during mount: ext2_init_fs() is invoked from ext2_mount() (subsys/fs/ext2/ext2_ops.c), the registered .mount operation. Any path that mounts an attacker-supplied ext2 image (removable media, a disk/flash partition, or a downloaded image) triggers it. The kernel-privileged parser operates on attacker-controlled data, so the bug is exploitable wherever untrusted ext2 media can be mounted.
Impact is an out-of-bounds read only: the resulting bit count is compared internally and the mount is rejected, so no attacker-controlled bytes are returned (not a useful information leak). The ~512 MB over-read will almost certainly cross an unmapped or MPU-protected boundary and fault, crashing the system — a denial of service triggered by mounting a single malformed image. The fix rejects any image whose fs_blocks exceeds fs->block_size * 8 before the scan. |
