| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_multiport: validate range encoding in checkentry
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - limit RX SG extraction by receive buffer budget
Make af_alg_get_rsgl() limit each RX scatterlist extraction to the
remaining receive buffer budget.
af_alg_get_rsgl() currently uses af_alg_readable() only as a gate
before extracting data into the RX scatterlist. Limit each extraction
to the remaining af_alg_rcvbuf(sk) budget so that receive-side
accounting matches the amount of data attached to the request.
If skcipher cannot obtain enough RX space for at least one chunk while
more data remains to be processed, reject the recvmsg call instead of
rounding the request length down to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00usb: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the USB anchor lifetime so that it is released on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_report()
struct xfrm_user_report is a __u8 proto field followed by a struct
xfrm_selector which means there is three "empty" bytes of padding, but
the padding is never zeroed before copying to userspace. Fix that up by
zeroing the structure before setting individual member variables. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rfkill: prevent unlimited numbers of rfkill events from being created
Userspace can create an unlimited number of rfkill events if the system
is so configured, while not consuming them from the rfkill file
descriptor, causing a potential out of memory situation. Prevent this
from bounding the number of pending rfkill events at a "large" number
(i.e. 1000) to prevent abuses like this. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: clear trailing padding in build_polexpire()
build_expire() clears the trailing padding bytes of struct
xfrm_user_expire after setting the hard field via memset_after(),
but the analogous function build_polexpire() does not do this for
struct xfrm_user_polexpire.
The padding bytes after the __u8 hard field are left
uninitialized from the heap allocation, and are then sent to
userspace via netlink multicast to XFRMNLGRP_EXPIRE listeners,
leaking kernel heap memory contents.
Add the missing memset_after() call, matching build_expire(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: Fix dma_free_coherent() size
dma_alloc_consistent() may change the size to align it. The new size is
saved in alloced.
Change the free size to match the allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
Keep the NOC_HDCP clock always enabled to fix the potential hang
caused by the NoC ADB400 port power down handshake. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
Switch from using the completion's raw spinlock to a local lock in the
idpf_vc_xn struct. The conversion is safe because complete/_all() are
called outside the lock and there is no reason to share the completion
lock in the current logic. This avoids invalid wait context reported by
the kernel due to the async handler taking BH spinlock:
[ 805.726977] =============================
[ 805.726991] [ BUG: Invalid wait context ]
[ 805.727006] 7.0.0-rc2-net-devq-031026+ #28 Tainted: G S OE
[ 805.727026] -----------------------------
[ 805.727038] kworker/u261:0/572 is trying to lock:
[ 805.727051] ff190da6a8dbb6a0 (&vport_config->mac_filter_list_lock){+...}-{3:3}, at: idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727099] other info that might help us debug this:
[ 805.727111] context-{5:5}
[ 805.727119] 3 locks held by kworker/u261:0/572:
[ 805.727132] #0: ff190da6db3e6148 ((wq_completion)idpf-0000:83:00.0-mbx){+.+.}-{0:0}, at: process_one_work+0x4b5/0x730
[ 805.727163] #1: ff3c6f0a6131fe50 ((work_completion)(&(&adapter->mbx_task)->work)){+.+.}-{0:0}, at: process_one_work+0x1e5/0x730
[ 805.727191] #2: ff190da765190020 (&x->wait#34){+.+.}-{2:2}, at: idpf_recv_mb_msg+0xc8/0x710 [idpf]
[ 805.727218] stack backtrace:
...
[ 805.727238] Workqueue: idpf-0000:83:00.0-mbx idpf_mbx_task [idpf]
[ 805.727247] Call Trace:
[ 805.727249] <TASK>
[ 805.727251] dump_stack_lvl+0x77/0xb0
[ 805.727259] __lock_acquire+0xb3b/0x2290
[ 805.727268] ? __irq_work_queue_local+0x59/0x130
[ 805.727275] lock_acquire+0xc6/0x2f0
[ 805.727277] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727284] ? _printk+0x5b/0x80
[ 805.727290] _raw_spin_lock_bh+0x38/0x50
[ 805.727298] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727303] idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727310] idpf_recv_mb_msg+0x1c8/0x710 [idpf]
[ 805.727317] process_one_work+0x226/0x730
[ 805.727322] worker_thread+0x19e/0x340
[ 805.727325] ? __pfx_worker_thread+0x10/0x10
[ 805.727328] kthread+0xf4/0x130
[ 805.727333] ? __pfx_kthread+0x10/0x10
[ 805.727336] ret_from_fork+0x32c/0x410
[ 805.727345] ? __pfx_kthread+0x10/0x10
[ 805.727347] ret_from_fork_asm+0x1a/0x30
[ 805.727354] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix call removal to use RCU safe deletion
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key reference count leak from call->key
When creating a client call in rxrpc_alloc_client_call(), the code obtains
a reference to the key. This is never cleaned up and gets leaked when the
call is destroyed.
Fix this by freeing call->key in rxrpc_destroy_call().
Before the patch, it shows the key reference counter elevated:
$ cat /proc/keys | grep afs@54321
1bffe9cd I--Q--i 8053480 4169w 3b010000 1000 1000 rxrpc afs@54321: ka
$
After the patch, the invalidated key is removed when the code exits:
$ cat /proc/keys | grep afs@54321
$ |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix reference count leak in rxrpc_server_keyring()
This patch fixes a reference count leak in rxrpc_server_keyring()
by checking if rx->securities is already set. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
Fix rxgk_verify_response() to clean up the rxgk context it creates. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU: Fix FPDSS on Zen1
Zen1's hardware divider can leave, under certain circumstances, partial
results from previous operations. Those results can be leaked by
another, attacker thread.
Fix that with a chicken bit. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix NULL pointer dereference in alps_raw_event()
Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event
callbacks missing them") attempted to fix up the HID drivers that had
missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir:
Fix potential NULL dereference at raw event handle"), but the alps
driver was missed.
Fix this up by properly checking in the hid-alps driver that it had been
claimed correctly before attempting to process the raw event. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: clamp report_size in s32ton() to avoid undefined shift
s32ton() shifts by n-1 where n is the field's report_size, a value that
comes directly from a HID device. The HID parser bounds report_size
only to <= 256, so a broken HID device can supply a report descriptor
with a wide field that triggers shift exponents up to 256 on a 32-bit
type when an output report is built via hid_output_field() or
hid_set_field().
Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds in
hid_report_raw_event") added the same n > 32 clamp to the function
snto32(), but s32ton() was never given the same fix as I guess syzbot
hadn't figured out how to fuzz a device the same way.
Fix this up by just clamping the max value of n, just like snto32()
does. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix NULL deref on missing interface 0
A malicious USB device with the TASCAM US-144MKII device id can have a
configuration containing bInterfaceNumber=1 but no interface 0. USB
configuration descriptors are not required to assign interface numbers
sequentially, so usb_ifnum_to_if(dev, 0) returns will NULL, which will
then be dereferenced directly.
Fix this up by checking the return value properly. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: fireworks: bound device-supplied status before string array lookup
The status field in an EFW response is a 32-bit value supplied by the
firewire device. efr_status_names[] has 17 entries so a status value
outside that range goes off into the weeds when looking at the %s value.
Even worse, the status could return EFR_STATUS_INCOMPLETE which is
0x80000000, and is obviously not in that array of potential strings.
Fix this up by properly bounding the index against the array size and
printing "unknown" if it's not recognized. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix off-by-8 bounds check in check_wsl_eas()
The bounds check uses (u8 *)ea + nlen + 1 + vlen as the end of the EA
name and value, but ea_data sits at offset sizeof(struct
smb2_file_full_ea_info) = 8 from ea, not at offset 0. The strncmp()
later reads ea->ea_data[0..nlen-1] and the value bytes follow at
ea_data[nlen+1..nlen+vlen], so the actual end is ea->ea_data + nlen + 1
+ vlen. Isn't pointer math fun?
The earlier check (u8 *)ea > end - sizeof(*ea) only guarantees the
8-byte header is in bounds, but since the last EA is placed within 8
bytes of the end of the response, the name and value bytes are read past
the end of iov.
Fix this mess all up by using ea->ea_data as the base for the bounds
check.
An "untrusted" server can use this to leak up to 8 bytes of kernel heap
into the EA name comparison and influence which WSL xattr the data is
interpreted as. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix device leak on probe failure
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on all probe errors (e.g. when descriptor parsing
fails).
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks. |
