Export limit exceeded: 387052 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (96500 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74725 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: enic: fix tx_hang_reset use-after-free on device removal enic_remove() cancels the reset and change_mtu_work items but does not cancel tx_hang_reset. A TX timeout that fires while the device is being removed can schedule enic_tx_hang_reset() so that it runs after free_netdev(), resulting in a use-after-free. cancel_work_sync() alone is not sufficient here: the still-live watchdog and notify paths can re-schedule these work items in the window between the cancel and unregister_netdev(). Use disable_work_sync(), which cancels the work and blocks any subsequent schedule_work() from requeuing it, and apply it to the reset and change_mtu_work items as well so the same requeue race is closed for all teardown work. | ||||
| CVE-2026-74731 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Skip sub-disable teardown for never-linked sub-schedulers A sub-scheduler enable can fail before scx_link_sched() links the sched into the hierarchy, e.g. when the parent is already being disabled, and cleanup still runs the full scx_sub_disable(). That is racy against root disable: drain_descendants() is the only ordering between a sub's disable-time task walk and root disable's all-task teardown, and an unlinked sub is invisible to it. Root's teardown can thus run between the never-linked sub's drain and its walk, exiting every task to no scheduler. The walk then trips the membership WARN and re-homes the exited tasks onto the dying hierarchy, a use-after-free. Skip the cgroup ownership reset and the task walk if @sch was never linked, indicated by the empty ->sibling as unlinking only happens later in the same function. The membership WARN remains valid: a linked sub is always waited on by an ancestor's drain. | ||||
| CVE-2026-74733 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock Locking is disabled in the regmap config as this driver uses its own lock. This means that all calls to regmap functions (read or write) must hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do this, and it was therefore possible that multiple threads could cause an incorrect register to be read/written. A previous patch partly fixed this, but only protected the write to the interrupt mask register, and not the read from the direction register. | ||||
| CVE-2025-34025 | 2 Versa, Versa-networks | 2 Concerto, Concerto | 2026-08-25 | 8.8 High |
| The Versa Concerto SD-WAN orchestration platform is vulnerable to an privileges escalation and container escape vulnerability caused by unsafe default mounting of host binary paths that allow the container to modify host paths. The escape can be used to trigger remote code execution or direct host access depending on the host operating system configuration.This issue is known to affect Concerto from 12.1.2 through 12.2.0. Additional versions may be vulnerable. | ||||
| CVE-2026-19550 | 2 Freeipa, Redhat | 2 Freeipa, Enterprise Linux | 2026-08-25 | 8.2 High |
| A flaw was found in FreeIPA. The trust-fetch-domains command is gated by a read-only permission on the trust object rather than a trust-administration permission, allowing an authenticated, non-privileged IPA user to trigger a privileged Active Directory trust refresh using an attacker-supplied server and credentials, resulting in unauthorized, attacker-controlled modification of trusted-domain and ID-range identity data in the IPA LDAP directory. | ||||
| CVE-2026-74604 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "thermal/drivers/hwmon: Cleanup coding style a bit" Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style a bit") that introduced a use-after-free into the error path of thermal_add_hwmon_sysfs() by removing a valid check from it. | ||||
| CVE-2026-74609 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: read le->link under the node lock in tipc_node_link_down() tipc_node_link_down() caches the link pointer before taking n->lock: struct tipc_link *l = le->link; /* unlocked */ if (!l) return; tipc_node_write_lock(n); if (!tipc_link_is_establishing(l)) { /* deref l */ ... tipc_link_reset(l); /* write into l */ if (delete) { kfree(l); le->link = NULL; The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it: - CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock; - CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l). The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B frees it: a use-after-free read in tipc_link_is_establishing(), and a use-after-free write via tipc_link_reset() on the establishing branch. The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6: BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285) Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0 tipc_link_is_establishing (net/tipc/link.c:285) tipc_node_link_down (net/tipc/node.c:1076) tipc_node_timeout (net/tipc/node.c:843) Allocated by task 9549: tipc_link_create (net/tipc/link.c:490) tipc_node_check_dest (net/tipc/node.c:1279) tipc_disc_rcv (net/tipc/discover.c:252) tipc_udp_recv (net/tipc/udp_media.c:389) Freed by task 9549: tipc_node_link_down (net/tipc/node.c:1084) tipc_node_delete_links (net/tipc/node.c:1320) bearer_disable (net/tipc/bearer.c:414) __tipc_nl_bearer_disable (net/tipc/bearer.c:992) Move the le->link read inside tipc_node_write_lock(), so it is serialised against the kfree() in the delete path. A racing teardown now either has not run yet, and we see a valid link, or has already run, and we see NULL. | ||||
| CVE-2026-74610 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tls: don't leave a full plaintext sk_msg ring unpushed When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills the plaintext sk_msg ring, it does not set full_record, so the record is left full and unpushed. A later splice() then adds to an already full ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps onto sg.start and the ring appears empty. Fragments added after that overwrite live entries, and sg.size no longer matches what is reachable between sg.start and sg.end, so pushing the record runs the scatterwalk off the end of the scatterlist. An unprivileged user can trigger this on a loopback TCP socket with the "tls" ULP attached: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0 Call Trace: skcipher_walk_next+0x1d1/0x2c0 gcm_encrypt_aesni_avx+0x1e9/0x220 bpf_exec_tx_verdict+0x3bb/0x860 tls_sw_sendmsg+0xa1a/0xca0 __sys_sendto+0x1da/0x1f0 Set full_record in the copy path when the ring becomes full, and push a record that is already full on entry to the sendmsg loop. | ||||
| CVE-2026-74614 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: read virtqueues under worker locks Commit bd50c5dc182b ("vsock/virtio: add support for device suspend/resume") made the *_run flags transition from false to true when restore installs replacement virtqueues. The RX, TX and event workers read their virtqueue before locking and checking the corresponding flag, so a worker delayed across freeze and restore can observe the replacement queue's running state while retaining a pointer to the deleted queue. Read each virtqueue under its mutex after checking the run flag, keeping the pointer and state in the same queue generation. | ||||
| CVE-2026-74704 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_cake: drop WARN_ON(1) for malformed packets in ACK filter The sch_cake ACK filter parses packets to find the TCP header and filter duplicated ACKs if the flow is backlogged. The parsing code contains a WARN_ON(1) which can be triggered by a malformed IP header in certain cases. Depending on the system configuration, this leads either to either spamming dmesg with warnings, or a panic if panic_on_warn is set. The code already correctly skips the offending packet in the branch that triggers the warning, so the WARN_ON itself doesn't really serve any purpose. So just drop it altogether to avoid the inconvenient side effects. | ||||
| CVE-2026-12992 | 1 Redhat | 2 Apicurio Registry, Build Of Apicurio Registry | 2026-08-25 | 7.4 High |
| A flaw was found in Apicurio Registry. The WSDLReaderAccessor creates a wsdl4j WSDLReader without disabling the javax.wsdl.importDocuments feature. When the VALIDITY rule is set to FULL, an attacker with Developer-role access can upload a WSDL document containing attacker-controlled import locations, causing the registry to issue HTTP requests to arbitrary internal URLs (server-side request forgery). | ||||
| CVE-2026-12975 | 1 Redhat | 2 Apicurio Registry, Build Of Apicurio Registry | 2026-08-25 | 8.5 High |
| A flaw was found in Apicurio Registry. The ContentTypeUtil.isParsableXml() method creates a SAXParserFactory without enabling secure processing features or disabling external entity resolution. An attacker with artifact-write permission (or unauthenticated when the registry runs with default configuration) can upload a crafted XML document to trigger blind server-side request forgery (SSRF) via external DTD/entity fetch, or cause denial of service via entity expansion. | ||||
| CVE-2025-23171 | 2 Versa, Versa-networks | 2 Director, Versa Director | 2026-08-25 | 7.2 High |
| The Versa Director SD-WAN orchestration platform provides an option to upload various types of files. The Versa Director does not correctly limit file upload permissions. The UI appears not to allow file uploads but uploads still succeed. In addition, the Versa Director discloses the full filename of uploaded temporary files, including the UUID prefix. Insecure UCPE image upload in Versa Director allows an authenticated attacker to upload a webshell. Exploitation Status: Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers. Workarounds or Mitigation: There are no workarounds to disable the GUI option. Versa recommends that Director be upgraded to one of the remediated software versions. | ||||
| CVE-2026-79667 | 2 Ech0, Lin-snow | 2 Ech0, Ech0 | 2026-08-25 | 7.6 High |
| Ech0 version 4.3.4 and earlier fails to reliably enforce scoped access token (least-privilege) restrictions on several privileged admin routes. Multiple privileged endpoints (e.g., /api/inbox, /api/panel/comments, /api/backup/export) omit scope checks and authorize based only on the user's admin role, and the backup export handler discards token scope metadata entirely. An attacker holding a deliberately limited (low-scope) admin access token can reach broader privileged functionality than intended, including reading the inbox and exporting a full database backup ZIP archive. Fixed in 4.4.3. | ||||
| CVE-2026-78654 | 1 Cleverbrush | 2 Deep, Framework | 2026-08-25 | 7.3 High |
| A vulnerability has been found in cleverbrush framework and deep up to 4.4.0. This impacts the function deepExtend of the file libs/deep/src/deepExtend.ts. The manipulation leads to improperly controlled modification of object prototype attributes. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. Upgrading to version 4.4.1 will fix this issue. The identifier of the patch is 810398c1308c500c3b8b6af380b5a89371389327. You should upgrade the affected component. | ||||
| CVE-2026-76574 | 1 Code-projects | 1 Hospital Information System | 2026-08-25 | 7.3 High |
| A flaw has been found in code-projects Hospital Information System 1.0. The impacted element is the function User::login of the file includes/users/UsersController.php of the component User Login Handler. This manipulation of the argument email causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used. | ||||
| CVE-2026-68561 | 1 Wekan | 1 Wekan | 2026-08-25 | 8.8 High |
| Wekan is open source kanban built with Meteor. Prior to 9.89, the second Boards.allow({ update }) rule in server/permissions/boards.js called canUpdateBoardSort in server/lib/utils.js, which authorized any board member whenever fieldNames included sort. Because Meteor combines allow rules with OR semantics and applies the complete modifier, a comment-only or read-only member could send one Boards.update with $set values for sort, members, permission, and title, make themselves the sole board administrator, expose a private board, and evict the legitimate owner; the last-admin deny rule inspected only $pull and did not block a wholesale $set of members. Version 9.89 requires sort to be the only modified field and rejects $set member arrays that remove the last active administrator. This issue is fixed in version 9.89. | ||||
| CVE-2026-54457 | 1 Tensorzero | 1 Tensorzero | 2026-08-25 | 7.7 High |
| TensorZero is an open-source LLMOps platform that unifies an LLM gateway, observability, evaluation, optimization, and experimentation. Prior to 2026.6.0, the TensorZero Gateway /internal/object_storage endpoint accepts a caller-supplied JSON storage_path parameter that dynamically overrides the [object_storage] configuration. Selecting the filesystem storage type allows arbitrary files on the gateway filesystem to be read, including credential files. Selecting the s3_compatible storage type causes outbound object-storage requests to attacker-chosen internal or cloud-metadata endpoints. Exploitation requires access to the gateway, which can be authenticated or unauthenticated depending on deployment configuration. This issue is fixed in version 2026.6.0. | ||||
| CVE-2026-53549 | 1 Termix | 1 Termix | 2026-08-25 | 7.7 High |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. Prior to 2.3.2, the POST /host/db/proxy/test endpoint accepts the singleProxy, proxyChain, and testTarget request fields without validating their destination addresses. The testProxyConnectivity path uses raw TCP and SOCKS connections to attacker-selected hosts and ports, allowing an authenticated user to probe localhost, private networks, link-local metadata services, and other infrastructure reachable from the Termix server. Structured connection errors disclose host reachability and timing information, and successful metadata access can expose cloud credentials. This issue is fixed in version 2.3.2. | ||||
| CVE-2026-53542 | 1 Termix | 1 Termix | 2026-08-25 | 8.8 High |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. Prior to 2.3.2, the archive creation endpoint in src/backend/ssh/file-manager.ts passes selected file basenames to tar without an end-of-options marker and without making the operands unambiguously relative. A user with access to an SSH file-manager session can select basenames beginning with GNU tar options such as --checkpoint=1 and --checkpoint-action=exec, causing tar, tar.gz, tar.bz2, or tar.xz creation to interpret those names as options. The resulting checkpoint action executes commands on the managed SSH host with the privileges of the connected SSH account, allowing file disclosure, modification, and service disruption. This issue is fixed in version 2.3.2. | ||||