| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SiYuan Windows installer before version 3.8.1 (affected versions >= 2.0.14) contains an uncontrolled search path element vulnerability in its NSIS installer, which invokes system executables such as TASKKILL by name rather than by absolute path. Because NSIS nsExec::Exec resolves these calls using a search path that includes the installer's own launch directory ahead of System32, an attacker who plants a malicious executable (e.g., a renamed TASKKILL.exe) in that directory can have it executed when the installer runs. These calls occur in electron-builder's preInit hook before the license page is displayed, and with an all-users (elevated) install the planted binary executes with an elevated token, resulting in local privilege escalation. |
| The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a plain sys_slist_t, which provides no synchronization. The allocation helpers (i3c_ibi_work_enqueue, i3c_ibi_work_enqueue_target_irq, i3c_ibi_work_enqueue_hotjoin, i3c_ibi_work_enqueue_controller_request, i3c_ibi_work_enqueue_cb) called sys_slist_get() directly from ISR context, while the workqueue handler i3c_ibi_work_handler() returned nodes with sys_slist_append() from the workqueue thread, with no lock on either side.
Because sys_slist_get() and sys_slist_append() are neither atomic nor interrupt-safe, an IBI interrupt that fires while the workqueue thread is mid-append (or a truly parallel access under CONFIG_SMP) races on the shared list. This corrupts the list linkage: a node may be handed to two consumers, a node may be lost, or the head/tail pointers may be left inconsistent so sys_slist_get() returns a stale or garbage pointer. In the double-hand-out case the subsequent memcpy(ibi_node, ibi_work, sizeof(*ibi_node)) overwrites a node still in flight; a garbage pointer turns the same memcpy into an out-of-bounds write.
The race is driven by I3C bus traffic — IBIs, hot-joins, and controller-role requests originate from target devices on the bus, and I3C supports hot-joining devices. An attacker controlling an I3C peripheral on the board's chip-to-chip bus can generate high-frequency interrupts timed to collide with the free operation. Exploitation requires physical access to the bus and winning a narrow timing window; the most realistic impact is a crash or hang (denial of service), with memory corruption possible but hard to control.
The fix wraps all free-list sys_slist_get()/sys_slist_append() operations in the new ibi_work_alloc()/ibi_work_free() helpers, each guarded by a k_spinlock (ibi_work_lock), closing the race across ISR and thread contexts. |
| Out-of-bounds read for some Intel(R) PROSet/Wireless WiFi Software for Windows within Ring 0: Kernel may allow a denial of service. Unprivileged software adversary with an unauthenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| WWBN AVideo (current e01e41ecc and earlier) contains a brute-force rate limiting bypass in enforceRateLimit(), which protects login.json.php and 13 other endpoints. The function stores its attempt counter via a cache layer (ObjectYPT::setCacheGlobal) that silently discards writes for any client identified as a bot by isBot(). Because isBot() treats a missing User-Agent header as a bot by default — and also matches common bot identifiers such as 'curl', 'bot', 'crawler', and 'spider' — the counter never increments for such clients, so the rate limit never fires. An unauthenticated attacker can therefore submit unlimited login attempts (e.g., by omitting the User-Agent header or using curl's default User-Agent), enabling unrestricted password-guessing attacks. |
| A malicious virtual function can invoke the certain command handlers in the SMU, causing a denial of service due to out-of-bounds memory read. |
| jina-ai reader disables its private-address guard outside Google Cloud deployments, allowing unauthenticated attackers to perform server-side request forgery. Attackers can supply publicly resolvable hostnames mapping to private addresses to retrieve cloud metadata and internal service content. |
| Unrestricted deserialization of untrusted data in the cursor pagination component in the OpenSearch SQL plugin allows a remote authenticated user with basic read/search permissions to execute arbitrary code on the server by sending a crafted cursor parameter to the plugins/sql endpoint. |
| Incorrect access control in the updatePriStaList function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to refresh the primary station list via sending a crafted MQTT message to the cs_broker component. |
| Null pointer dereference for some Intel(R) PROSet/Wireless WiFi Software for Windows within Ring 0: Kernel may allow a denial of service. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| The LwM2M JSON content formatter's get_string() in subsys/net/lib/lwm2m/lwm2m_rw_json.c copies a parsed JSON string into a caller-supplied buffer and NUL-terminates it. The length guard used if (string_length > buflen), which accepts a string whose length is exactly buflen. After memcpy() fills the whole buffer, buf[string_length] = '\0' then writes one byte past the end of the buffer (CWE-787).
The string value and its length are taken directly from the incoming CoAP payload during a LwM2M WRITE: do_write_op_json() parses the payload obtained from coap_packet_get_payload(), and get_string() is invoked from lwm2m_write_handler() (engine_get_string() in subsys/net/lib/lwm2m/lwm2m_message_handling.c) for a LWM2M_RES_TYPE_STRING resource. The destination buf/buflen is either the resource instance's fixed data buffer (res_inst->data_ptr/max_data_len) or the engine validation buffer (msg->ctx->validate_buf). A LwM2M server (the client's DTLS peer) can therefore write a string resource with a value whose length equals the target buffer size and force a one-byte overflow.
The overflow is a single out-of-bounds write of the constant byte 0x00 immediately past the resource or validation buffer, corrupting the adjacent byte in memory. It is not an information leak and the written value is fixed, so it is not a direct code-execution primitive, but it can corrupt adjacent state (an adjacent resource value, a length/flag field, or a struct field) and cause data corruption or a crash. Triggering the write is deterministic; the resulting impact depends on memory layout.
The fix changes the guard to string_length >= buflen, rejecting the exact-length case and aligning the JSON formatter with the other content formatters (lwm2m_rw_plain_text.c, lwm2m_rw_oma_tlv.c, lwm2m_rw_senml_json.c, lwm2m_rw_cbor.c, lwm2m_rw_senml_cbor.c), which already used the correct boundary check. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage. |
| A flaw was found in the file-xwd plugin in GIMP. When processing a specially crafted XWD image file, the plugin validates the image width and bytes-per-line parameters independently rather than ensuring their combined values are consistent with the allocated buffer size. This incorrect validation leads to improper bounds checking, causing a heap out-of-bounds read. This issue can result in an application crash, leading to a denial of service, or a limited information disclosure of heap memory contents into the produced image. |
| A weakness has been identified in Tenda HG10 300001138. Affected by this issue is the function formIPv6Routing of the file /boaform/admin/formIPv6Routing of the component Boa Web Server. This manipulation of the argument destNet causes buffer overflow. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. |
| When Ethernet bridging is enabled (CONFIG_NET_ETHERNET_BRIDGE), eth_bridge_input_process() in subsys/net/l2/ethernet/bridge/bridge_input.c decides how each frame received on a bridge member interface is handled. For frames that must also be delivered to the local stack, the code called eth_bridge_handle_locally() and returned NET_OK. That helper does not consume the packet — it only calls bridge_iface_recv() (via virtual_recv()), which returns NET_CONTINUE without taking ownership of pkt.
The NET_OK verdict then propagates through ethernet_recv() up to processing_data() in subsys/net/ip/net_core.c, where NET_OK is interpreted as "the packet was consumed, do not free it." Because no consumer actually took ownership, the RX net_pkt is never returned to the pool and is leaked. The concretely reproducible leak occurs for frames whose EtherType has no registered L3 handler when CONFIG_NET_ETHERNET_FORWARD_UNRECOGNISED_ETHERTYPE is set (default y when CONFIG_NET_SOCKETS_PACKET is enabled): the fall-through L3 dispatch does not overwrite the NET_OK verdict, so ethernet_recv() returns NET_OK and the buffer is never released.
Any device on a bridged L2 segment can emit broadcast/multicast frames carrying an arbitrary EtherType with no authentication. Each such frame permanently consumes one buffer from the finite RX pool (CONFIG_NET_PKT_RX_COUNT), so a brief broadcast flood exhausts the pool and the device can no longer receive traffic until it is rebooted — a persistent denial of service. There is no confidentiality or integrity impact.
The fix makes eth_bridge_handle_locally() propagate the real net_verdict and return NET_CONTINUE for locally-kept frames, writing the bridge interface back through a new dst_iface out-parameter so the packet follows the normal receive path and is unreferenced exactly once. |
| Use after free for some Intel(R) PROSet/Wireless WiFi Software for Windows within Ring 0: Kernel may allow a denial of service. System software adversary with an unauthenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Privilege escalation due to use-after-free in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 155 and Firefox ESR 153.2. |
| Information disclosure in the WebExtensions component in Firefox for Android. This vulnerability was fixed in Firefox 155. |
| Site isolation issue in the DOM: Push Subscriptions component. This vulnerability was fixed in Firefox 155 and Firefox ESR 153.2. |
| An unauthenticated client can query the Security Domain hosts inventory via GET /ca/rest/securityDomain/hosts and receive a structured response enumerating internal PKI/CA hosts and roles (security domain topology and participating subsystems), without requiring a principal, client certificate, or session. |
| Incorrect access control in the getDiagnosisCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain diagnostic configuration and ping log contents via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
