| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject fragmented frames in devmap
Devmap broadcast redirects clone the packet for all but the last
destination.
For native XDP, that clone path copies only the linear xdp_frame data,
while fragmented frames keep skb_shared_info in tailroom outside the
linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but
without valid frag metadata, and the later free path can interpret
uninitialized tail data as skb_shared_info, leading to an out-of-bounds
access during frame return.
Reject fragmented native XDP frames in dev_map_enqueue_clone().
Add the same restriction to the generic XDP clone path in
dev_map_redirect_clone(). Generic XDP represents fragmented packets as
nonlinear skbs, and rejecting them here keeps clone-based broadcast
support aligned between native and generic XDP. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: qcom-cpufreq-hw: Fix possible double free
qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an
array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to
one element of this array in policy->driver_data.
qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data.
This is not valid because the memory is devm-managed. For the first
domain, this can free the devm-managed allocation while the devres entry
is still active, leading to a possible double free when the platform
device is later detached. For other domains, the pointer may refer to an
element inside the array rather than the allocation base.
Remove the kfree(data) call and let devres release qcom_cpufreq.data.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: altera: Fix resource leaks on probe failure
The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.
Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.
So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: avoid kobject path lookup in DualSense match
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate STALE_COOKIE cause length before reading staleness
When an ERROR chunk with a STALE_COOKIE cause is received in the
COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure
of Staleness that follows the cause header:
err = (struct sctp_errhdr *)(chunk->skb->data);
stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err)));
err is the first cause in the chunk, not the STALE_COOKIE cause that
caused the dispatch, and nothing guarantees the staleness field is
present. sctp_walk_errors() only requires a cause to be as long as the
4-byte header, so for a STALE_COOKIE cause of length 4 the read runs
past the cause, and for a minimal ERROR chunk past skb->tail. The value
is echoed to the peer in the Cookie Preservative of the reply INIT,
leaking uninitialized memory.
sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, so
check its length there and pass it to sctp_sf_do_5_2_6_stale(), which
reads that cause instead of the first one. A STALE_COOKIE cause too
short to hold the staleness field is discarded.
The read is reachable by any peer that can drive an association into
COOKIE_ECHOED, including an unprivileged process using a raw SCTP socket
in a user and network namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0). |
| Use after free in Ozone in Google Chrome on Linux prior to 150.0.7871.128 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: validate reply message payload bounds against transfer length
nvmet_auth_reply() accesses the variable-length rval[] array using
attacker-controlled hl (hash length) and dhvlen (DH value length) fields
without verifying they fit within the allocated buffer of tl bytes.
A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a
small transfer length but large hl/dhvlen values, causing out-of-bounds
heap reads when the target processes the DH public key (rval + 2*hl) or
performs the host response memcmp.
With DH authentication configured, the OOB pointer is passed directly to
sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching
up to 526 bytes past the buffer. This is exploitable pre-authentication.
Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before
any access to the variable-length fields.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (FD links)
proc_pid_get_link() and proc_pid_readlink() currently look up the task from
the pid once, then do the ptrace access check on that task, then look up
the task from the pid a second time to do the actual access.
That's racy in several ways.
To fix it, pass the task to the ->proc_get_link() handler, and instead of
proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that
looks up and locks the task, does the access check, and calls
->proc_get_link(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden POSIX SID length parsing
posix_info_sid_size() reads sid[1] to obtain the subauthority count,
but its existing boundary check still accepts buffers with only one
remaining byte. Require two bytes before reading sid[1] so all client
paths that reuse the helper reject truncated POSIX SIDs safely. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: virtio: Validate control metadata from the device
virtio-snd control handling trusts the device-provided control type and
value count returned by the device.
That metadata is then used directly to index g_v2a_type_map[] in
virtsnd_kctl_info(), and to size loops and memcpy() operations in
virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size
virtio_snd_ctl_value and snd_ctl_elem_value arrays.
A buggy or malicious device can therefore trigger out-of-bounds access by
advertising an invalid control type or an oversized value count.
Validate control type and count once in virtsnd_kctl_parse_cfg(), before
querying enumerated items or exposing the control to ALSA. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: gate must_wait writability check on pte_present()
userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE
without taking the page table lock and then apply pte_write() /
huge_pte_write() to it. Those accessors decode bits from the present
encoding only; on a swap or migration entry they read the offset bits that
happen to share the same position and return an undefined result.
The intent of the check is "is this fault still WP-blocked?". A
non-marker swap entry means the page is in transit -- the userfault
context the original fault delivered against is no longer the same, and
the swap-in or migration completion path will re-deliver a fresh fault if
userspace still needs to handle it. Worst case under the current code the
garbage write bit says "wait", and the thread stays asleep until a
UFFDIO_WAKE that may never arrive.
Gate the writability check on pte_present() so the lockless re-check only
inspects present-PTE bits when the entry is actually present. The
non-present, non-marker case returns "don't wait" and lets the fault path
retry. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/edid: fix OOB read in drm_parse_tiled_block()
drm_parse_tiled_block() casts the DisplayID block to a
struct displayid_tiled_block and reads the full fixed layout up to
tile->topology_id[7] without checking block->num_bytes. The DisplayID
iterator only validates the declared payload length, so a crafted EDID
can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or
DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at
the end of a DisplayID extension. The read then runs past the end of the
exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read.
Reject blocks shorter than the spec's 22-byte tiled payload before
reading the fixed struct, as drm_parse_vesa_mso_data() already does.
BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update
Read of size 2 at addr ffff888010077700 by task exploit/147
dump_stack_lvl (lib/dump_stack.c:94 ...)
print_report (mm/kasan/report.c:378 ...)
kasan_report (mm/kasan/report.c:595)
drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581)
bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574)
drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426)
status_store (drivers/gpu/drm/drm_sysfs.c:219)
...
vfs_write (fs/read_write.c:595 fs/read_write.c:688)
ksys_write (fs/read_write.c:740) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops()
kvm_hyp_handle_mops() resets the single-step state machine as part of
rewinding state for a MOPS exception by modifying vcpu_cpsr() and
writing the result directly into hardware.
In the case of nested virtualization, vcpu_cpsr() is a synthetic value
such that the rest of KVM can deal with vEL2 cleanly. That means the
value requires translation before being written into hardware, which is
unfortunately missing from the MOPS handler.
Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state
altogether, which will be resynchronized on the next 'full' exit back
to KVM. |
