| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in json-glib. The JSONPath slice evaluator used by json_path_query() can enter an infinite loop when given a slice expression with a negative step. An application that evaluates attacker-controlled JSONPath expressions can be forced into a hang, leading to a denial of service. |
| unarr through 1.1.1 contains a heap-based out-of-bounds read in zip_parse_extra_fields() in zip/parse-zip.c due to an incorrect ZIP64 extra field length check. Attackers can supply a crafted ZIP archive with 0xFFFFFFFF sentinel values and a truncated ZIP64 record to read past the heap buffer and crash the process. |
| A vulnerability was found in VStarcam O-KAM Client 1.3.3.32. Affected by this vulnerability is the function FUN_10003EA0 in the library DevDll_925.dll. The manipulation results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in deepset-ai farm up to 0.8.0. Affected is the function WordEmbedding_LM.load of the file farm/modeling/language_model.py of the component Model Package Loader. The manipulation of the argument embeddings_filename leads to path traversal. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx()
On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one
sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[]
shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma()
dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader()
writes two such indices into meta->buffers[], which rb_cpu_meta_valid()
would reject on the next boot, discarding the previous boot's trace.
A CPU's sub-buffer array starts after its meta header and the nr_subbufs
integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx()
inverts that calculation but skips only the integers, not the header, so
its base is one sub-buffer low whenever the omitted header size crosses
the alignment boundary.
Invert the calculation with rb_subbufs_from_meta() rather than repeating
it. rb_range_buffer() maps an index back to an address through the same
helper, so the two directions can no longer disagree. |
| A flaw has been found in deepset-ai farm up to 0.8.0. This impacts the function EmbeddingTokenizer.from_pretrained of the file farm/modeling/tokenization.py of the component Tokenizer Loader. Executing a manipulation of the argument vocab_filename can lead to path traversal. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| A weakness has been identified in Aklivity Zilla up to 1.3.4/2.4.7/2.5.0-rc2. The affected element is the function Path.resolve of the file FileSystemServerFactory of the component http-filesystem Binding. This manipulation of the argument params causes path traversal. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. Upgrading to version 2.5.0-rc3 is sufficient to fix this issue. Patch name: 46a8b15cbea157f7ae8b7cb865809a02fd6b1988. You should upgrade the affected component. |
| LobeHub Chat from 1.84.26 before 2.1.49 contains a path traversal vulnerability that allows authenticated users to write arbitrary files by supplying unsanitized file names to writeTempFile(). Attackers can create a file record via file.createFile with a traversal name, then trigger document parsing to overwrite application files like startServer.js for code execution or denial of service. |
| Network-AI from 5.14.0 before 5.15.5 contains a missing authentication vulnerability in the A2AServer class that allows unauthenticated attackers to access task operations when no secret is configured. Attackers can send JSON-RPC requests to tasks/send, tasks/get, and tasks/cancel without a Bearer token to execute tasks, read results, and cancel tasks. |
| Network-AI before 5.15.5 contains a path traversal vulnerability in InputSanitizer.sanitizePath() that allows attackers to escape the base directory using sibling-directory paths. Attackers can supply paths whose directory name shares a string prefix with the base, bypassing the unanchored startsWith check to read, list, or write files outside the sandbox. |
| Network-AI from 5.13.4 before 5.15.5 contains a path traversal vulnerability in FileJobStore that allows attackers to read or delete arbitrary .json files by supplying traversal sequences in the job id. Attackers controlling the id passed to FileJobStore.get(), FileJobStore.delete(), or JobQueue.getJob() can disclose credentials and grant tokens or delete configuration files to weaken AuthGuardian authorization. |
| Parse Server before 8.6.109 and 9.0.0 before 9.10.6-alpha.1 returns stored field values in object update responses without checking read access, so clients whose class-level permissions or object ACLs allow update but not read can see object data. Attackers can update such objects to read atomic operation results (Increment, Add, AddUnique, Remove), Cloud Code trigger-set values, and, for dot notation keys under certain conditions, the whole stored parent field. |
| A security flaw has been discovered in samanhappy MCPHub up to 1.0.45/1.1.7. Impacted is an unknown function of the file src/utils/passthroughHeaders.ts. The manipulation of the argument passthroughHeaders results in information disclosure. The attack may be launched remotely. Upgrading to version 1.1.8 is recommended to address this issue. The patch is identified as 040f7b9ae004070bdfe5084cde6bc2c609f78e76. It is advisable to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Reject a negative task index from parse_pdu_itt
A transport that implements parse_pdu_itt hands libiscsi an index taken
from the PDU, and both lookups bound it from above only:
if (i >= session->cmds_max)
i and cmds_max are both int, so a negative index passes and
session->cmds[i] is read from before the array.
be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag,
*index = (int)itt;
and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the
hardware async ring without replacing its ITT, so the value is the
target's. It also reports the session's own age rather than the one in
the tag, which leaves the age comparison in iscsi_verify_itt() with
nothing to reject.
Bound the index from below in both lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: st: Fix use-after-free race between st_remove() and st_open()
st_remove() drops the probe reference on the scsi_tape with kref_put()
and only afterwards removes its index from st_index_idr. If that was the
last reference, scsi_tape_release() frees the structure while it is
still published in the idr.
scsi_tape_get(), called from st_open(), looks up the tape in
st_index_idr and takes a reference under st_ref_mutex and
st_index_lock. remove_cdevs() does not wait for opens that are already
past chrdev_open(), so an open that is blocked on st_ref_mutex while
st_remove() holds it can take the mutex as soon as st_remove() drops it,
find the freed tpnt in the idr and call kref_get() on it:
BUG: KASAN: slab-use-after-free in st_open
Write of size 4 ...
st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291)
chrdev_open
...
Freed by task ...:
kfree
st_remove (drivers/scsi/st.c:4512)
Remove the index from the idr before dropping the reference, all under
st_ref_mutex. A concurrent scsi_tape_get() now either runs first and
holds a valid reference that keeps the tape alive, or runs afterwards
and finds nothing, so st_open() fails with -ENXIO.
This restores the ordering st_remove() had before the conversion to
st_index_idr, where the tape was unpublished from scsi_tapes[] before
the final kref_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix false warning in ring_buffer_map_get_reader()
The mmap reader can warn when it catches up with a writer that is still
committing events. rb_get_reader_page() returns NULL in this case, but
ring_buffer_map_get_reader() treats that result as an error.
The initial rb_per_cpu_empty() check filters out an empty buffer, but it
does not guarantee that the next reader page has committed data. Writers
do not take reader_lock and can advance commit_page before publishing the
committed length on the new page. rb_get_reader_page() can swap to that
page, catch up with the writer and return NULL.
Handle NULL through the existing no-data exit without warning. Remove the
caller's reader_page == commit_page check as well, since the reader-page
helper already handles that case. The existing metadata update and return
path remain in place. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not show buffer_meta for CPUs without a buffer
The per_cpu/cpuN/buffer_meta files are created for every possible CPU,
but buffer->buffers[cpu] is only allocated once that CPU comes online.
Reading the file of a CPU that never came online dereferences a NULL
cpu_buffer in rbm_start().
Fail the open with -ENODEV when the CPU has no buffer, as the other
per CPU ring buffer interfaces do. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe()
In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any
subsequent operation fails or when the module is unloaded, the clock
reference count is never decremented via clk_put(), leading to a
resource leak.
Switch to devm_clk_get() so that the clock is automatically managed
and released. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix use-after-free bug when adding shared proxies
The GPIO lookup table can stay alive for longer than the kobject whose
name string's address we're assigning to lookup->dev_id. Fix a potential
UAF by duplicating the string. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix race condition in split transaction handling
For a split transaction, either fw_core_handle_response() or
split_transaction_timeout_callback() may manipulate the same transaction
entry in the pending transaction list. The return value of timer_delete()
is used to determine which function handles the entry. If the transaction
is a split transaction and timer_delete() returns zero, the timeout
callback may already be running. In this case, the response handler must
leave the entry in the list for the timeout callback to remove.
A previous code refactoring broke this behavior, introducing a race
condition in which both functions could process the same transaction.
This could lead to a use-after-free on the transaction initiator side.
Fix the regression by ensuring that the response handler does not process
the transaction when timer_delete() returns zero. The timeout callback is
responsible for removing the entry from the pending transaction list. |
