| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the implementation of Protected Extensible Authentication Protocol (PEAP) functionality for standalone configurations of Cisco Aironet 1800, 2800, and 3800 Series Access Points could allow an unauthenticated, adjacent attacker to bypass authentication and connect to an affected device. The vulnerability exists because the affected device uses an incorrect default configuration setting of fail open when running in standalone mode. An attacker could exploit this vulnerability by attempting to connect to an affected device. A successful exploit could allow the attacker to bypass authentication and connect to the affected device. This vulnerability affects Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running a vulnerable software release and use WLAN configuration settings that include FlexConnect local switching and central authentication with MAC filtering. Cisco Bug IDs: CSCvd46314. |
| A vulnerability in the detection engine parsing of IPv6 packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause high CPU utilization or to cause a denial of service (DoS) condition because the Snort process restarts unexpectedly. The vulnerability is due to improper input validation of the fields in the IPv6 extension header packet. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. This vulnerability is specific to IPv6 traffic only. This vulnerability affects Cisco Firepower System Software Releases 6.0 and later when the software has one or more file action policies configured and is running on any of the following Cisco products: 3000 Series Industrial Security Appliances (ISR), Adaptive Security Appliance (ASA) 5500-X Series with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances, Virtual Next-Generation Intrusion Prevention System (NGIPSv) for VMware. Cisco Bug IDs: CSCvd34776. |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. |
| A vulnerability in motherboard console ports of line cards for Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to access an affected device's operating system. The vulnerability exists because an engineering console port is available on the motherboard of the affected line cards. An attacker could exploit this vulnerability by physically connecting to the console port on the line card. A successful exploit could allow the attacker to gain full access to the affected device's operating system. This vulnerability affects only Cisco ASR 1000 Series Routers that have removable line cards and Cisco cBR-8 Converged Broadband Routers, if they are running certain Cisco IOS XE 3.16 through 16.5 releases. Cisco Bug IDs: CSCvc65866, CSCve77132. |
| A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690. |
| A vulnerability in Cisco SPA300 and SPA500 Series IP Phones could allow an unauthenticated, remote attacker to execute unwanted actions on an affected device. The vulnerability is due to a lack of cross-site request forgery (CSRF) protection. An attacker could exploit this vulnerability by tricking the user of a web application into executing an adverse action. Cisco Bug IDs: CSCuz88421, CSCuz91356, CSCve56308. |
| A vulnerability in conditional, verbose debug logging for the IPsec feature of Cisco IOS XE Software could allow an authenticated, local attacker to display sensitive IPsec information in the system log file. The vulnerability is due to incorrect implementation of IPsec conditional, verbose debug logging that causes sensitive information to be written to the log file. This information should be restricted. An attacker who has valid administrative credentials could exploit this vulnerability by authenticating to the device and enabling conditional, verbose debug logging for IPsec and viewing the log file. An exploit could allow the attacker to access sensitive information related to the IPsec configuration. Cisco Bug IDs: CSCvf12081. |
| Multiple vulnerabilities in Cisco Data Center Network Manager (DCNM) Software could allow a remote attacker to inject arbitrary values into DCNM configuration parameters, redirect a user to a malicious website, inject malicious content into a DCNM client interface, or conduct a cross-site scripting (XSS) attack against a user of the affected software. Cisco Bug IDs: CSCvf40477, CSCvf63150, CSCvf68218, CSCvf68235, CSCvf68247. |
| A vulnerability in the web framework of Cisco Firepower Management Center could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of the affected software. The vulnerability is due to insufficient validation of user-supplied input by the affected software. Successful exploitation of this vulnerability could allow the attacker to execute arbitrary code in the context of the affected system. Cisco Bug IDs: CSCvc38983. |
| A vulnerability in the web-based management interface of Cisco Firepower Management Center could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvc50771. |
| A vulnerability in the ability for guest users to join meetings via a hyperlink with Cisco Meeting Server could allow an authenticated, remote attacker to enter a meeting with a hyperlink URL, even though access should be denied. The vulnerability is due to the incorrect implementation of the configuration setting Guest access via hyperlinks, which should allow the administrative user to prevent guest users from using hyperlinks to connect to meetings. An attacker could exploit this vulnerability by using a crafted hyperlink to connect to a meeting. An exploit could allow the attacker to connect directly to the meeting with a hyperlink, even though access should be denied. The attacker would still require a valid hyperlink and encoded secret identifier to be connected. Cisco Bug IDs: CSCve20873. |
| On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd. |
| A vulnerability in the Operations, Administration, Maintenance, and Provisioning (OAMP) credential reset functionality for Cisco Unified Customer Voice Portal (CVP) could allow an authenticated, remote attacker to gain elevated privileges. The vulnerability is due to a lack of proper input validation. An attacker could exploit this vulnerability by authenticating to the OAMP and sending a crafted HTTP request. A successful exploit could allow the attacker to gain administrator privileges. The attacker must successfully authenticate to the system to exploit this vulnerability. This vulnerability affects Cisco Unified Customer Voice Portal (CVP) running software release 10.5, 11.0, or 11.5. Cisco Bug IDs: CSCve92752. |
| A vulnerability in the web-based user interface (web UI) of Cisco IOS XE 16.2 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incorrect default permission settings for new users who are created by using the web UI of the affected software. An attacker could exploit this vulnerability by using the web UI of the affected software to create a new user and then logging into the web UI as the newly created user. A successful exploit could allow the attacker to elevate their privileges on the affected device. This vulnerability affects Cisco devices that are running a vulnerable release Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuy83062. |
| A Denial of Service Vulnerability in 802.11 ingress packet processing of the Cisco Mobility Express 2800 and 3800 Access Points (APs) could allow an unauthenticated, adjacent attacker to cause the connection table to be full of invalid connections and be unable to process new incoming requests. More Information: CSCvb66659. Known Affected Releases: 8.2(130.0). Known Fixed Releases: 8.2(131.10) 8.2(131.6) 8.2(141.0) 8.3(104.56) 8.4(1.88) 8.4(1.91). |
| Technicolor DPC3928AD DOCSIS devices allow remote attackers to read arbitrary files via a request starting with "GET /../" on TCP port 4321. |
| A vulnerability in Cisco Hybrid Meeting Server could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against the user of the web interface. More Information: CSCvc28662. Known Affected Releases: 1.0. |
| A vulnerability in 802.11 Wireless Multimedia Extensions (WME) action frame processing in Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the 802.11 WME packet header. An attacker could exploit this vulnerability by sending malformed 802.11 WME frames to a targeted device. A successful exploit could allow the attacker to cause the WLC to reload unexpectedly. The fixed versions are 8.0.140.0, 8.2.130.0, and 8.3.111.0. Cisco Bug IDs: CSCva86353. |
| Multiple vulnerabilities in Cisco Data Center Network Manager (DCNM) Software could allow a remote attacker to inject arbitrary values into DCNM configuration parameters, redirect a user to a malicious website, inject malicious content into a DCNM client interface, or conduct a cross-site scripting (XSS) attack against a user of the affected software. Cisco Bug IDs: CSCvf40477, CSCvf63150, CSCvf68218, CSCvf68235, CSCvf68247. |
| A vulnerability in the CLI command parser of the Cisco Mobility Express 2800 and 3800 Series Wireless LAN Controllers could allow an authenticated, local attacker to obtain access to the underlying operating system shell with root-level privileges. More Information: CSCvb70351. Known Affected Releases: 8.3(102.0). |
