| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: avoid rereading IB param length
Reuse the parameter length returned by
vcn_v4_0_enc_find_ib_param() instead of rereading it from
the IB.
This avoids a potential TOCTOU issue if the IB contents
change between reads.
(cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: reject mapping a reserved doorbell to a new queue
When creating an user-queue, the user space
provides a doorbell BO handle and an offset within
the bo to obtain a doorbell.
However current implementation using xa_store_irq()
to store a doorbell, which allows a later queue created
with the same BO and offset parameters to overwrite an
existing queue and doorbell mapping.
This can cause problems like misrouting fence IRQ
processing to a wrong queue, and mislead the cleanup
process of one queue erasing the mapping of another queue.
This commit fixes this issue by replacing xa_store_irq with
xa_insert_irq, which rejects mapping a reserved
doorbell to a newly created queue
(cherry picked from commit 6244eae22966350db52faf9c1369d3b2ffc5de4e) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: bound DACL dedup walk to copied ACEs
set_ntacl_dacl() can stop copying ACEs before consuming the full input
DACL when size accounting overflows.
When that happens, num_aces reflects only the ACEs that were actually
copied into the output DACL, but set_posix_acl_entries_dacl() still
receives nt_num_aces and uses it to walk the existing ACE array during
dedup.
That makes the dedup walk scan past the copied ACE array and inspect
buffer tail that does not contain valid ACEs.
Split the two meanings currently carried by the NT ACE count. Pass the
number of copied NT ACEs to bound the dedup walk, and preserve the
original "input DACL had NT ACEs" state separately for the
Everyone/default ACL fallback.
This keeps the dedup walk aligned with the ACEs that are actually
present in the rebuilt DACL. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: stop hardware after post-start probe failures
wacom_parse_and_register() starts HID hardware before registering inputs
and initializing pad LEDs/remotes. Those later steps can fail, but their
error paths currently release Wacom resources without stopping the HID
hardware.
Route post-hid_hw_start() failures through hid_hw_stop() before
releasing driver resources.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix path resolution in ksmbd_vfs_kern_path_create
The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the
create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an
absolute path with convert_to_unix_name() and resolves it from AT_FDCWD
via start_creating_path(), so a ".." component is walked from the real
filesystem root and escapes the export.
An authenticated client races a missing path component so the rooted open
lookup returns -ENOENT (taking the create branch) while the same component
is present (a directory) when the create walk runs; the create then
resolves ".." out of the share.
Root the create walk at the share like the lookup and rename paths already
are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH,
&share_conf->vfs_path) and create the final component with
start_creating_noperm(). convert_to_unix_name() then has no callers and is
removed. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm_dev_release() uses plain kfree() to free chip->auth, which contains
sensitive cryptographic material including HMAC session keys, nonces,
and passphrase data (struct tpm2_auth).
Every other code path that frees this structure uses kfree_sensitive()
to zero the memory before releasing it: both tpm2_end_auth_session()
and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path
is the only one that does not, leaving key material in freed slab
memory until it is eventually overwritten.
Use kfree_sensitive() for consistency with the rest of the driver and
to ensure session keys are scrubbed during device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: clear waitid info before copying it to userspace
IORING_OP_WAITID stores its result fields in struct io_waitid::info and
later copies them to userspace siginfo. The prep path initializes the
request arguments, but it does not initialize info itself.
If the wait operation completes without reporting a child event, the common
wait code can return without writing wo_info. In that case io_waitid_finish()
still copies iw->info to userspace, exposing stale bytes from the reused
io_kiocb command storage.
Clear the result storage during prep so the io_uring path matches the
regular waitid syscall, which uses a zero-initialized struct waitid_info. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: fix access mode flags being ORed instead of replaced
Since commit 1f3e4142c0eb ("9p: convert to the new mount API"),
v9fs_apply_options() applies parsed mount flags with |= onto flags
already set by v9fs_session_init(). For 9P2000.L, session_init sets
V9FS_ACCESS_CLIENT as the default, so when the user mounts with
"access=user", both bits end up set. Access mode checks compare
against exact values, so having both bits set matches neither mode.
This causes v9fs_fid_lookup() to fall through to the default switch
case, using INVALID_UID (nobody/65534) instead of current_fsuid()
for all fid lookups. Root is then unable to chown or perform other
privileged operations.
Fix by clearing the access mask before applying the user's choice. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: frag: disallow unicast fragment in fragment
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process. |
| A race condition was discovered in ext4_write_inline_data_end in fs/ext4/inline.c in the ext4 subsystem in the Linux kernel through 5.13.13. |
| A use-after-free exists in the Linux Kernel in tc_new_tfilter that could allow a local attacker to gain privilege escalation. The exploit requires unprivileged user namespaces. We recommend upgrading past commit 04c2a47ffb13c29778e2a14e414ad4cb5a5db4b5 |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: unify lcn as u64 for 32-bit platforms
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc
pci_epf_alloc_doorbell() stores the allocated doorbell message array in
epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation
fails, the array is freed but the EPF state may still point to freed
memory.
Clear epf->db_msg and epf->num_db on the MSI allocation failure path so
that later cleanup cannot double-free the array and callers can retry
allocation.
Also return -EBUSY when doorbells have already been allocated to prevent
leaking or overwriting an existing allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
power: reset: linkstation-poweroff: fix use-after-free in the linkstation_poweroff_init()
Move of_node_put(dn) after the of_match_node() call, which still needs
the node pointer. The node reference is correctly released after use. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: smp: report dying CPU to RCU in stop_this_cpu()
smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function
marks the CPU offline for the scheduler via set_cpu_online(false) but
never informs RCU, so RCU keeps expecting a quiescent state from CPUs
that are now spinning forever with interrupts disabled.
As long as nothing waits for an RCU grace period after smp_send_stop()
this is harmless, which is why it went unnoticed. Since commit
91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
however, irq_work_sync() calls synchronize_rcu() on architectures without
an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns
false. That is the asm-generic default used by MIPS. Any irq_work_sync()
issued in the reboot/shutdown path after smp_send_stop() then blocks on
a grace period that can never complete, hanging the reboot:
WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on
...
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu: Offline CPU 1 blocking current GP.
rcu: Offline CPU 2 blocking current GP.
rcu: Offline CPU 3 blocking current GP.
This issue was noticed on several Realtek MIPS switch SoCs (MIPS
interAptiv) and came up during kernel bump downstream in OpenWrt from
6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable
branch. The patch also has been backported all the way back to 6.1.
Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the
generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs
and grace periods can still complete. MIPS shuts down all CPUs here
without going through the CPU-hotplug mechanism, so this report is not
otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug
offline path is not unprecedented: arm64 does the same in cpu_die_early().
There it is an exception for a CPU that was coming online and is aborting
bringup, rather than the default shutdown action as on MIPS. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: region: fix use-after-free in child_regions_with_firmware()
Move of_node_put(child_region) after the error print to avoid accessing
freed memory when pr_err() references child_region.
[ Yilun: Fix the Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
Input: touchwin - reset the packet index on every complete packet
tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:
tw->data[tw->idx++] = data;
if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
...
tw->idx = 0;
}
The reset is gated on tw->data[1] == tw->data[2], a value the device
controls. A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.
Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - bound the device-reported force-feedback effect index
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: goodix - clamp the device-reported contact count
goodix_ts_read_input_report() copies the number of touch points reported
by the device into an on-stack buffer
u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only
runtime check bounds the per-interrupt count against ts->max_touch_num,
but that value is taken verbatim from a 4-bit field of the device
configuration block and is never clamped:
ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
The nibble can be 0..15, so a malfunctioning, malicious or counterfeit
controller (or an attacker tampering with the I2C bus) can advertise up
to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num
of up to 15 and the second goodix_i2c_read() writes
ts->contact_size * (touch_num - 1) bytes past the one-contact header into
point_data - up to 30 bytes (45 with the 9-byte report format) beyond the
92-byte buffer: a stack out-of-bounds write.
Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts
point_data[] is sized for, when reading it from the configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
rmi_f30_map_gpios() allocates gpioled_key_map with
min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f30_attention() iterates the full f30->gpioled_count (device query
register, range 0..31) and dereferences gpioled_key_map[i], and
input->keycodemax is set to the full gpioled_count while input->keycode
points at the 6-entry allocation.
A device that reports gpioled_count > 6 with GPIO support enabled
therefore causes an out-of-bounds read on the attention interrupt and
out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls,
which bound the index only against keycodemax. This is the same defect
as the F3A handler, which was copied from F30.
Size the keymap for the full gpioled_count; the mapping loop still
assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. |
