| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix the reception of a reply packet before data transmission
Fix rxrpc_receiving_reply() to handle the reception of an apparent reply
DATA packet before rxrpc has had a chance to send any request DATA packets
on a client call by checking to see if the call has been exposed yet by
sending the first packet.
Without this, rxrpc_rotate_tx_window() might oops.
Also fix rxrpc_rotate_tx_window() to handle the Tx queue being empty by
changing the do...while loop into a while loop, just in case a call is
abnormally terminated by an early reply before the last request packet is
transmitted. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix ACKALL packet handling
rxrpc_input_ackall() accepts ACKALL packets without checking whether the
call is in a state that can legitimately have outstanding transmit buffers.
A forged ACKALL can therefore reach a new service call in
RXRPC_CALL_SERVER_RECV_REQUEST before any reply packets have been queued.
In that state call->tx_top is zero and call->tx_queue is NULL, so
rxrpc_rotate_tx_window() dereferences a NULL txqueue and triggers a
null-pointer dereference.
Fix the handling of ACKALL packets by the following means:
(1) Add two new call states: RXRPC_CALL_CLIENT_PRE_SEND which indicates
that the client call is connected, but nothing has been transmitted as
yet; and RXRPC_CALL_CLIENT_AWAIT_ACK, which indicates that everything
has been transmitted at least once, but we're now waiting for the
stuff remaining in the Tx buffer to be ACK'd (retransmissions may
still happen).
The RXRPC_CALL_CLIENT_PRE_SEND state is set when the call is assigned
a channel and transitions to RXRPC_CALL_CLIENT_SEND_REQUEST when the
first packet is transmitted.
RXRPC_CALL_CLIENT_AWAIT_REPLY is then narrowed in scope to indicate
that all Tx packets have been ACK'd and we're now waiting for the
reply to be received.
(2) As per Wyatt Feng's original patch[1], the ACKALL handler then checks
that the call state is one in which there might be stuff in the Tx
buffer to ACK, but now this includes AWAIT_ACK rather than
AWAIT_REPLY. ACKALL packets are ignored if received in the wrong
state.
Note that unlike Wyatt Feng's patch, it's no longer necessary to check
to see if the Tx buffer exists as this the state set now covers this.
(3) Make the ACKALL handler use call->tx_transmitted rather than
call->tx_top as the former is explicitly the highest packet seq number
transmitted, whereas the latter has a looser definition.
Thanks to Jeffrey Altman for a description of the history of the ACKALL
packet[1]. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: remove all cifs files before kill super
Cifs files may be put into fileinfo_put_wq during umounting cifs.
After umount done, cifsFileInfo_put_final is called, which cause
following BUG:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
[ 134.222152] list_lru_add+0x64/0x1a0
[ 134.222399] ? cifs_put_tcon+0x171/0x340 [cifs]
[ 134.222772] d_lru_add+0x44/0x60
[ 134.222997] dput+0x1fc/0x210
[ 134.223213] cifsFileInfo_put_final+0x11a/0x140 [cifs]
[ 134.223576] process_one_work+0x17c/0x320
[ 134.223843] worker_thread+0x188/0x280
[ 134.224084] ? __pfx_worker_thread+0x10/0x10
[ 134.224366] kthread+0xcc/0x100
[ 134.224576] ? __pfx_kthread+0x10/0x10
[ 134.224827] ret_from_fork+0x30/0x50
[ 134.225063] ? __pfx_kthread+0x10/0x10
[ 134.225328] ret_from_fork_asm+0x1b/0x30
This can be reproduce by following:
unshare -n bash -c "
mkdir -p ${CIFS_MNT}
ip netns attach root 1
ip link add eth0 type veth peer veth0 netns root
ip link set eth0 up
ip -n root link set veth0 up
ip addr add 192.168.0.2/24 dev eth0
ip -n root addr add 192.168.0.1/24 dev veth0
ip route add default via 192.168.0.1 dev eth0
ip netns exec root sysctl net.ipv4.ip_forward=1
ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o
${DEV} -j MASQUERADE
mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o
vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1
touch ${CIFS_MNT}/a.txt
ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o
${DEV} -j MASQUERADE
"
umount ${CIFS_MNT} |
| In the Linux kernel, the following vulnerability has been resolved:
fhandle: reject detached mounts in capable_wrt_mount()
The recent fhandle RCU fix moved the mount namespace capability check
into capable_wrt_mount(), so a non-NULL mnt_namespace survives the
ns_capable() dereference. The helper still assumes the later
READ_ONCE(mount->mnt_ns) must be non-NULL because may_decode_fh()
checked is_mounted() first.
That assumption is not stable. A detached mount from
open_tree(..., OPEN_TREE_CLONE) can be dissolved on fput while
open_by_handle_at() is between those checks, and umount_tree() can
clear mount->mnt_ns. If the helper observes NULL, it dereferences
mnt_ns->user_ns and panics.
Return false when the RCU read observes a detached mount. This keeps
the relaxed permission path conservative: a mount no longer attached
to a namespace cannot authorize open_by_handle_at() access. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: skip global block reserve accounting for rescue mounts
[BUG]
Mounting with rescue=ibadroots after corrupting the block group tree
root triggers a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000100
RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs]
Call Trace:
fill_dummy_bgs+0xd4/0x120 [btrfs]
open_ctree+0xc6e/0x1ca0 [btrfs]
btrfs_get_tree+0x50d/0xa40 [btrfs]
The same crash occurs with a corrupted raid stripe tree root, via
btrfs_read_block_groups() instead of fill_dummy_bgs().
[CAUSE]
With rescue=ibadroots, btrfs_read_roots() allows the mount to continue
when either root cannot be read, leaving the corresponding root pointer
NULL while its on-disk feature bit remains set.
btrfs_update_global_block_rsv() then dereferences the missing root based
on the feature bit alone.
[FIX]
Rescue mounts are fully read-only and cannot start transactions, so the
global reserve is never consumed. Under btrfs_is_full_ro(), mark the
reserve as full and return before performing the accounting.
And since we need to check if the fs is mount fully RO, export
fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h.
[ Squash the fs_is_full_ro() export commit into this one. ] |
| In the Linux kernel, the following vulnerability has been resolved:
of/address: Fix NULL bus dereference in of_pci_range_parser_one()
The bus matching rework made of_match_bus() return NULL for nodes with
ranges/dma-ranges but no local #address-cells. parser_init() stored that
NULL bus, and the range iterator later dereferenced it.
Reject such nodes in parser_init(), leaving an explicit empty
iterator for callers that ignore the init return, and make
of_dma_get_max_cpu_address() honour the init failure so a rejected node
cannot clamp the DMA limit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: reject DX_BIND_QUERY without a DX context
vmw_cmd_dx_bind_query() unconditionally dereferences
sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer
dereference from any render-node fd by submitting an execbuf with
dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY
opcode in the command stream: dx_ctx_node is left NULL and the kernel
oopses on the assignment. The same NULL is then re-read in
vmw_resources_reserve() via vmw_context_get_dx_query_mob().
All sibling DX handlers fail-close on a missing dx_ctx_node using
VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up
front before any relocation state is published. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure
Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while
still leaving the rest of the driver in a state that calls
vmw_vkms_cleanup() at module unload:
1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or
returning an oversized buffer -- the common case on hosts
without a VBLANK guestinfo entry -- early-returned before the
workqueue allocation.
2. alloc_ordered_workqueue() returning NULL on memory pressure.
vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which
dereferences wq->name and panics.
Fix the first case by removing the early return: vmw->vkms_enabled
is already false on the rpci-failure path so no work will ever be
queued, and allocating the workqueue unconditionally keeps the
control flow simple. Fix the second case by guarding the cleanup
with a NULL check, since alloc_ordered_workqueue() can still fail
under low memory. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: fix NULL pointer dereference in afs_get_tree()
afs_alloc_sbi() uses kzalloc for memory allocation. And, if
ctx->dyn_root is not null, as->cell and as->volume are null.
In trace_afs_get_tree() they are dereferenced.
KASAN error message:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 2 PID: 18478 Comm: syz-executor.7 Not tainted 5.10.246-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1
04/01/2014
RIP: 0010:perf_trace_afs_get_tree+0x1d9/0x550
include/trace/events/afs.h:1365
Call Trace:
trace_afs_get_tree include/trace/events/afs.h:1365 [inline]
afs_get_tree+0x922/0x1350 fs/afs/super.c:599
vfs_get_tree+0x8e/0x300 fs/super.c:1572
do_new_mount fs/namespace.c:3011 [inline]
path_mount+0x14a5/0x2220 fs/namespace.c:3341
do_mount fs/namespace.c:3354 [inline]
__do_sys_mount fs/namespace.c:3562 [inline]
__se_sys_mount fs/namespace.c:3539 [inline]
__x64_sys_mount+0x283/0x300 fs/namespace.c:3539
do_syscall_64+0x33/0x50 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Fix potential tracepoint null pointer dereferences
Trace_dma_fence_signaled, trace_dma_fence_wait_end and
trace_dma_fence_destroy can all currently dereference a null fence->ops
pointer after it has been reset on fence signalling.
Lets use the safe string getters for most tracepoints to avoid this class
of a problem, while for the signal tracepoint we move it to before ops are
cleared to avoid losing the driver and timeline name information. Apart
from moving it we also need to add a new tracepoint class to bypass the
safe name getters since the signaled bit is already set.
For dma_fence_init we also need to use the new tracepoint class since the
rcu read lock is not held there, and we can do the same for the enable
signaling since there we are certain the fence cannot be signaled while
we are holding the lock and have even validated the fence->ops. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: Remove the duplicate attr inode dirty marking action
Syzbot reported a null-ptr-deref in [1].
If the attributes file is not loaded during system mount, a trigger
occurs [1] when setxattr is executed in userspace.
Remove the first mark attr inode dirty operation.
[1]
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
Call Trace:
hfsplus_setxattr+0x124/0x340 fs/hfsplus/xattr.c:555
hfsplus_trusted_setxattr+0x40/0x60 fs/hfsplus/xattr_trusted.c:30
__vfs_setxattr+0x43c/0x480 fs/xattr.c:218
__vfs_setxattr_noperm+0x12d/0x660 fs/xattr.c:252
vfs_setxattr+0x163/0x360 fs/xattr.c:339
do_setxattr fs/xattr.c:654 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries
bpf_set_dentry_xattr and bpf_remove_dentry_xattr BPF kfuncs attempt to
lock the inode of the supplied dentry without checking if it is
NULL. If a negative dentry is passed (e.g. from
security_inode_create), d_inode(dentry) returns NULL, and
inode_lock(inode) will cause a NULL pointer dereference.
Trivially fix this by adding a NULL check for inode before attempting
to lock it, returning -EINVAL if it is NULL.
Additionally, drop WARN_ON(!inode) in bpf_xattr_read_permission() and
bpf_xattr_write_permission(). These warnings could be triggered by
passing a negative dentry to bpf_get_dentry_xattr() or the _locked
variants of the xattr kfuncs, potentially causing a Denial of Service
on systems with panic_on_warn enabled. Instead, simply return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference
MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list
before initializing the fields used by the shared error path.
If eventfd_ctx_fdget() then fails, the unwind path dereferences
event_sub->ev_file in uverbs_uobject_put() and calls
subscribe_event_xa_dealloc() with an unset xa_key_level1.
subscribe_event_xa_alloc() creates the XA entry exactly once for a given
key_level1, on the first occurrence of that key. The unwind path must
therefore call subscribe_event_xa_dealloc() exactly once for it as well.
Enforce that by adding devx_key_in_sub_list() and calling
subscribe_event_xa_dealloc() only when the last matching pending entry is
being cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/kmem: account for partial discontiguous resource upon removal
When dev_dax_kmem_probe() partially succeeds (at least one range is
mapped) but a subsequent range fails request_mem_region() or
add_memory_driver_managed(), the probe silently continues, ultimately
returning success, but with the corresponding range resource NULL'ed out.
dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if
the underlying resource exists. When remove_memory() is called later, it
returns 0 because the memory was never added which causes
dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can
be removed and attempts cleanup on a NULL pointer.
Fix this by skipping these ranges altogether, noting that these cases are
considered success, such that the cleanup is still reached when all
actually-added ranges are successfully removed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL deref in change_sta_links for unready link
_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.
The subsequent drv_change_sta_links() call reaches
ath12k_mac_op_change_sta_links(), which allocates an arsta and sets
ahsta->links_map |= BIT(link_id) for the broken link before checking
whether the link is ready. When the vdev was never created, only
station_add() is skipped, but the link remains in links_map.
Any subsequent operation iterating links_map and dereferencing arvif->ar
without a NULL check will crash. Two observed examples are NULL deref in
ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key()
when wpa_supplicant installs PTK keys.
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
Call trace:
ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k]
drv_sta_state+0x100/0xbd8 [mac80211]
__sta_info_destroy_part2+0x148/0x178 [mac80211]
ieee80211_set_disassoc+0x500/0x678 [mac80211]
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
Call trace:
ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
drv_set_key+0x70/0x100 [mac80211]
ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211]
ieee80211_add_key+0x16c/0x2ac [mac80211]
nl80211_new_key+0x138/0x280 [cfg80211]
Fix this by checking arvif->is_created before calling
ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from
entering links_map, so all subsequent operations iterating the bitmap
are protected. The reliability of arvif->is_created across all error
paths is ensured by the preceding patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_task_from_vpid()
bpf_task_from_vpid() looks up a task in the pid namespace of the
current task, via find_task_by_vpid():
find_task_by_vpid(vpid)
find_task_by_pid_ns(vpid, task_active_pid_ns(current))
find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr)
cgroup_skb programs run in softirq, which may interrupt a task that is
itself in do_exit(). Once that task has passed
exit_notify() -> release_task() -> __unhash_process(), its thread_pid is
cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns()
dereferences &NULL->idr:
BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176
Call Trace:
<IRQ>
find_pid_ns kernel/pid.c:370 [inline]
find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485
bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916
bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81
__cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612
sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148
tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223
</IRQ>
<TASK>
do_exit+0xa63/0x1270 kernel/exit.c:1010
get_signal+0x141c/0x1530 kernel/signal.c:3037
Bail out when current has no pid namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
find_vm_area() can return NULL if the given address is not a valid vmalloc
area. Check the return value before dereferencing it to avoid a kernel
crash. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible NULL pointer dereference in mt7996_mac_write_txwi_80211()
For injected frames (e.g. via radiotap), mac80211 can pass
info->control.vif = NULL, as explicitly noted in struct ieee80211_tx_info.
Check vif pointer before executing ieee80211_vif_is_mld() in
mt7996_mac_write_txwi_80211 routine in order to avoid a possible NULL
pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_dmp_hdr() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_dmp_hdr() unconditionally dereferences hu->serdev->dev.driver->name,
causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check and falling back to
"hci_ldisc_qca" for the non-serdev case. |
