| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm: zynqmp_kms: Unplug DRM device before removal
Prevent userspace accesses to the DRM device from causing
use-after-frees by unplugging the device before we remove it. This
causes any further userspace accesses to result in an error without
further calls into this driver's internals. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release svc_expkey/svc_export with rcu_work
The last reference for `cache_head` can be reduced to zero in `c_show`
and `e_show`(using `rcu_read_lock` and `rcu_read_unlock`). Consequently,
`svc_export_put` and `expkey_put` will be invoked, leading to two
issues:
1. The `svc_export_put` will directly free ex_uuid. However,
`e_show`/`c_show` will access `ex_uuid` after `cache_put`, which can
trigger a use-after-free issue, shown below.
==================================================================
BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd]
Read of size 1 at addr ff11000010fdc120 by task cat/870
CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_address_description.constprop.0+0x2c/0x3a0
print_report+0xb9/0x280
kasan_report+0xae/0xe0
svc_export_show+0x362/0x430 [nfsd]
c_show+0x161/0x390 [sunrpc]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
proc_reg_read+0xe1/0x140
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 830:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_node_track_caller_noprof+0x1bc/0x400
kmemdup_noprof+0x22/0x50
svc_export_parse+0x8a9/0xb80 [nfsd]
cache_do_downcall+0x71/0xa0 [sunrpc]
cache_write_procfs+0x8e/0xd0 [sunrpc]
proc_reg_write+0xe1/0x140
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 868:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x37/0x50
kfree+0xf3/0x3e0
svc_export_put+0x87/0xb0 [nfsd]
cache_purge+0x17f/0x1f0 [sunrpc]
nfsd_destroy_serv+0x226/0x2d0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
2. We cannot sleep while using `rcu_read_lock`/`rcu_read_unlock`.
However, `svc_export_put`/`expkey_put` will call path_put, which
subsequently triggers a sleeping operation due to the following
`dput`.
=============================
WARNING: suspicious RCU usage
5.10.0-dirty #141 Not tainted
-----------------------------
...
Call Trace:
dump_stack+0x9a/0xd0
___might_sleep+0x231/0x240
dput+0x39/0x600
path_put+0x1b/0x30
svc_export_put+0x17/0x80
e_show+0x1c9/0x200
seq_read_iter+0x63f/0x7c0
seq_read+0x226/0x2d0
vfs_read+0x113/0x2c0
ksys_read+0xc9/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Fix these issues by using `rcu_work` to help release
`svc_expkey`/`svc_export`. This approach allows for an asynchronous
context to invoke `path_put` and also facilitates the freeing of
`uuid/exp/key` after an RCU grace period. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of signing key
Customers have reported use-after-free in @ses->auth_key.response with
SMB2.1 + sign mounts which occurs due to following race:
task A task B
cifs_mount()
dfs_mount_share()
get_session()
cifs_mount_get_session() cifs_send_recv()
cifs_get_smb_ses() compound_send_recv()
cifs_setup_session() smb2_setup_request()
kfree_sensitive() smb2_calc_signature()
crypto_shash_setkey() *UAF*
Fix this by ensuring that we have a valid @ses->auth_key.response by
checking whether @ses->ses_status is SES_GOOD or SES_EXITING with
@ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF
in smb2_reconnect_server()"), we made sure to call ->logoff() only
when @ses was known to be good (e.g. valid ->auth_key.response), so
it's safe to access signing key when @ses->ses_status == SES_EXITING. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0
Read of size 1 at addr ffff888111f322cd by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
Call Trace:
<IRQ>
dump_stack_lvl+0x68/0xa0
print_address_description.constprop.0+0x2c/0x3d0
print_report+0xb4/0x270
kasan_report+0xbd/0xf0
tcp_write_timer_handler+0x156/0x3e0
tcp_write_timer+0x66/0x170
call_timer_fn+0xfb/0x1d0
__run_timers+0x3f8/0x480
run_timer_softirq+0x9b/0x100
handle_softirqs+0x153/0x390
__irq_exit_rcu+0x103/0x120
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x76/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:default_idle+0xf/0x20
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90
90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 f8 25 00 fb f4 <fa> c3 cc cc cc
cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffffffffa2007e28 EFLAGS: 00000242
RAX: 00000000000f3b31 RBX: 1ffffffff4400fc7 RCX: ffffffffa09c3196
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9f00590f
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed102360835d
R10: ffff88811b041aeb R11: 0000000000000001 R12: 0000000000000000
R13: ffffffffa202d7c0 R14: 0000000000000000 R15: 00000000000147d0
default_idle_call+0x6b/0xa0
cpuidle_idle_call+0x1af/0x1f0
do_idle+0xbc/0x130
cpu_startup_entry+0x33/0x40
rest_init+0x11f/0x210
start_kernel+0x39a/0x420
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0x97/0xa0
common_startup_64+0x13e/0x141
</TASK>
Allocated by task 595:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x87/0x90
kmem_cache_alloc_noprof+0x12b/0x3f0
copy_net_ns+0x94/0x380
create_new_namespaces+0x24c/0x500
unshare_nsproxy_namespaces+0x75/0xf0
ksys_unshare+0x24e/0x4f0
__x64_sys_unshare+0x1f/0x30
do_syscall_64+0x70/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 100:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x54/0x70
kmem_cache_free+0x156/0x5d0
cleanup_net+0x5d3/0x670
process_one_work+0x776/0xa90
worker_thread+0x2e2/0x560
kthread+0x1a8/0x1f0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
Reproduction script:
mkdir -p /mnt/nfsshare
mkdir -p /mnt/nfs/netns_1
mkfs.ext4 /dev/sdb
mount /dev/sdb /mnt/nfsshare
systemctl restart nfs-server
chmod 777 /mnt/nfsshare
exportfs -i -o rw,no_root_squash *:/mnt/nfsshare
ip netns add netns_1
ip link add name veth_1_peer type veth peer veth_1
ifconfig veth_1_peer 11.11.0.254 up
ip link set veth_1 netns netns_1
ip netns exec netns_1 ifconfig veth_1 11.11.0.1
ip netns exec netns_1 /root/iptables -A OUTPUT -d 11.11.0.254 -p tcp \
--tcp-flags FIN FIN -j DROP
(note: In my environment, a DESTROY_CLIENTID operation is always sent
immediately, breaking the nfs tcp connection.)
ip netns exec netns_1 timeout -s 9 300 mount -t nfs -o proto=tcp,vers=4.1 \
11.11.0.254:/mnt/nfsshare /mnt/nfs/netns_1
ip netns del netns_1
The reason here is that the tcp socket in netns_1 (nfs side) has been
shutdown and closed (done in xs_destroy), but the FIN message (with ack)
is discarded, and the nfsd side keeps sending retransmission messages.
As a result, when the tcp sock in netns_1 processes the received message,
it sends the message (FIN message) in the sending queue, and the tcp timer
is re-established. When the network namespace is deleted, the net structure
accessed by tcp's timer handler function causes problems.
To fix this problem, let's hold netns refcnt for the tcp kernel socket as
done in other modules. This is an ugly hack which can easily be backported
to earlier kernels. A proper fix which cleans up the interfaces will
follow, but may not be so easy to backport. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free of network namespace.
Recently, we got a customer report that CIFS triggers oops while
reconnecting to a server. [0]
The workload runs on Kubernetes, and some pods mount CIFS servers
in non-root network namespaces. The problem rarely happened, but
it was always while the pod was dying.
The root cause is wrong reference counting for network namespace.
CIFS uses kernel sockets, which do not hold refcnt of the netns that
the socket belongs to. That means CIFS must ensure the socket is
always freed before its netns; otherwise, use-after-free happens.
The repro steps are roughly:
1. mount CIFS in a non-root netns
2. drop packets from the netns
3. destroy the netns
4. unmount CIFS
We can reproduce the issue quickly with the script [1] below and see
the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled.
When the socket is TCP, it is hard to guarantee the netns lifetime
without holding refcnt due to async timers.
Let's hold netns refcnt for each socket as done for SMC in commit
9744d2bf1976 ("smc: Fix use-after-free in tcp_write_timer_handler().").
Note that we need to move put_net() from cifs_put_tcp_session() to
clean_demultiplex_info(); otherwise, __sock_create() still could touch a
freed netns while cifsd tries to reconnect from cifs_demultiplex_thread().
Also, maybe_get_net() cannot be put just before __sock_create() because
the code is not under RCU and there is a small chance that the same
address happened to be reallocated to another netns.
[0]:
CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting...
CIFS: Serverclose failed 4 times, giving up
Unable to handle kernel paging request at virtual address 14de99e461f84a07
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[14de99e461f84a07] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs
CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1
Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fib_rules_lookup+0x44/0x238
lr : __fib_lookup+0x64/0xbc
sp : ffff8000265db790
x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01
x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580
x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500
x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002
x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294
x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0
x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500
Call trace:
fib_rules_lookup+0x44/0x238
__fib_lookup+0x64/0xbc
ip_route_output_key_hash_rcu+0x2c4/0x398
ip_route_output_key_hash+0x60/0x8c
tcp_v4_connect+0x290/0x488
__inet_stream_connect+0x108/0x3d0
inet_stream_connect+0x50/0x78
kernel_connect+0x6c/0xac
generic_ip_conne
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier()
The scmi_dev->name is released prematurely in __scmi_device_destroy(),
which causes slab-use-after-free when accessing scmi_dev->name in
scmi_bus_notifier(). So move the release of scmi_dev->name to
scmi_device_release() to avoid slab-use-after-free.
| BUG: KASAN: slab-use-after-free in strncmp+0xe4/0xec
| Read of size 1 at addr ffffff80a482bcc0 by task swapper/0/1
|
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.6.38-debug #1
| Hardware name: Qualcomm Technologies, Inc. SA8775P Ride (DT)
| Call trace:
| dump_backtrace+0x94/0x114
| show_stack+0x18/0x24
| dump_stack_lvl+0x48/0x60
| print_report+0xf4/0x5b0
| kasan_report+0xa4/0xec
| __asan_report_load1_noabort+0x20/0x2c
| strncmp+0xe4/0xec
| scmi_bus_notifier+0x5c/0x54c
| notifier_call_chain+0xb4/0x31c
| blocking_notifier_call_chain+0x68/0x9c
| bus_notify+0x54/0x78
| device_del+0x1bc/0x840
| device_unregister+0x20/0xb4
| __scmi_device_destroy+0xac/0x280
| scmi_device_destroy+0x94/0xd0
| scmi_chan_setup+0x524/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20
|
| Allocated by task 1:
| kasan_save_stack+0x2c/0x54
| kasan_set_track+0x2c/0x40
| kasan_save_alloc_info+0x24/0x34
| __kasan_kmalloc+0xa0/0xb8
| __kmalloc_node_track_caller+0x6c/0x104
| kstrdup+0x48/0x84
| kstrdup_const+0x34/0x40
| __scmi_device_create.part.0+0x8c/0x408
| scmi_device_create+0x104/0x370
| scmi_chan_setup+0x2a0/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20
|
| Freed by task 1:
| kasan_save_stack+0x2c/0x54
| kasan_set_track+0x2c/0x40
| kasan_save_free_info+0x38/0x5c
| __kasan_slab_free+0xe8/0x164
| __kmem_cache_free+0x11c/0x230
| kfree+0x70/0x130
| kfree_const+0x20/0x40
| __scmi_device_destroy+0x70/0x280
| scmi_device_destroy+0x94/0xd0
| scmi_chan_setup+0x524/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ncsi: Disable the ncsi work before freeing the associated structure
The work function can run after the ncsi device is freed, resulting
in use-after-free bugs or kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to cover read extent cache access with lock
syzbot reports a f2fs bug as below:
BUG: KASAN: slab-use-after-free in sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46
Read of size 4 at addr ffff8880739ab220 by task syz-executor200/5097
CPU: 0 PID: 5097 Comm: syz-executor200 Not tainted 6.9.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46
do_read_inode fs/f2fs/inode.c:509 [inline]
f2fs_iget+0x33e1/0x46e0 fs/f2fs/inode.c:560
f2fs_nfs_get_inode+0x74/0x100 fs/f2fs/super.c:3237
generic_fh_to_dentry+0x9f/0xf0 fs/libfs.c:1413
exportfs_decode_fh_raw+0x152/0x5f0 fs/exportfs/expfs.c:444
exportfs_decode_fh+0x3c/0x80 fs/exportfs/expfs.c:584
do_handle_to_path fs/fhandle.c:155 [inline]
handle_to_path fs/fhandle.c:210 [inline]
do_handle_open+0x495/0x650 fs/fhandle.c:226
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
We missed to cover sanity_check_extent_cache() w/ extent cache lock,
so, below race case may happen, result in use after free issue.
- f2fs_iget
- do_read_inode
- f2fs_init_read_extent_tree
: add largest extent entry in to cache
- shrink
- f2fs_shrink_read_extent_tree
- __shrink_extent_tree
- __detach_extent_node
: drop largest extent entry
- sanity_check_extent_cache
: access et->largest w/o lock
let's refactor sanity_check_extent_cache() to avoid extent cache access
and call it before f2fs_init_read_extent_tree() to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix double free err_addr pointer warnings
In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages
will be run many times so that double free err_addr in some special case.
So set the err_addr to NULL to avoid the warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Defer work in bpf_timer_cancel_and_free
Currently, the same case as previous patch (two timer callbacks trying
to cancel each other) can be invoked through bpf_map_update_elem as
well, or more precisely, freeing map elements containing timers. Since
this relies on hrtimer_cancel as well, it is prone to the same deadlock
situation as the previous patch.
It would be sufficient to use hrtimer_try_to_cancel to fix this problem,
as the timer cannot be enqueued after async_cancel_and_free. Once
async_cancel_and_free has been done, the timer must be reinitialized
before it can be armed again. The callback running in parallel trying to
arm the timer will fail, and freeing bpf_hrtimer without waiting is
sufficient (given kfree_rcu), and bpf_timer_cb will return
HRTIMER_NORESTART, preventing the timer from being rearmed again.
However, there exists a UAF scenario where the callback arms the timer
before entering this function, such that if cancellation fails (due to
timer callback invoking this routine, or the target timer callback
running concurrently). In such a case, if the timer expiration is
significantly far in the future, the RCU grace period expiration
happening before it will free the bpf_hrtimer state and along with it
the struct hrtimer, that is enqueued.
Hence, it is clear cancellation needs to occur after
async_cancel_and_free, and yet it cannot be done inline due to deadlock
issues. We thus modify bpf_timer_cancel_and_free to defer work to the
global workqueue, adding a work_struct alongside rcu_head (both used at
_different_ points of time, so can share space).
Update existing code comments to reflect the new state of affairs. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a potential use-after-free in bpf_link_free()
After commit 1a80dbcb2dba, bpf_link can be freed by
link->ops->dealloc_deferred, but the code still tests and uses
link->ops->dealloc afterward, which leads to a use-after-free as
reported by syzbot. Actually, one of them should be sufficient, so
just call one of them instead of both. Also add a WARN_ON() in case
of any problematic implementation. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger
When the cpu5wdt module is removing, the origin code uses del_timer() to
de-activate the timer. If the timer handler is running, del_timer() could
not stop it and will return directly. If the port region is released by
release_region() and then the timer handler cpu5wdt_trigger() calls outb()
to write into the region that is released, the use-after-free bug will
happen.
Change del_timer() to timer_shutdown_sync() in order that the timer handler
could be finished before the port region is released. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: move the EST lock to struct stmmac_priv
Reinitialize the whole EST structure would also reset the mutex
lock which is embedded in the EST structure, and then trigger
the following warning. To address this, move the lock to struct
stmmac_priv. We also need to reacquire the mutex lock when doing
this initialization.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068
Modules linked in:
CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0xd84/0x1068
lr : __mutex_lock+0xd84/0x1068
sp : ffffffc0864e3570
x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003
x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac
x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff
x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000
x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8
x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698
x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001
x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027
x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
__mutex_lock+0xd84/0x1068
mutex_lock_nested+0x28/0x34
tc_setup_taprio+0x118/0x68c
stmmac_setup_tc+0x50/0xf0
taprio_change+0x868/0xc9c |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix potential glock use-after-free on unmount
When a DLM lockspace is released and there ares still locks in that
lockspace, DLM will unlock those locks automatically. Commit
fb6791d100d1b started exploiting this behavior to speed up filesystem
unmount: gfs2 would simply free glocks it didn't want to unlock and then
release the lockspace. This didn't take the bast callbacks for
asynchronous lock contention notifications into account, which remain
active until until a lock is unlocked or its lockspace is released.
To prevent those callbacks from accessing deallocated objects, put the
glocks that should not be unlocked on the sd_dead_glocks list, release
the lockspace, and only then free those glocks.
As an additional measure, ignore unexpected ast and bast callbacks if
the receiving glock is dead. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau: lock the client object tree.
It appears the client object tree has no locking unless I've missed
something else. Fix races around adding/removing client objects,
mostly vram bar mappings.
4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI
[ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27
[ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
[ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau]
[ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe
[ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206
[ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58
[ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400
[ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000
[ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0
[ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007
[ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000
[ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0
[ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4562.099544] Call Trace:
[ 4562.099555] <TASK>
[ 4562.099573] ? die_addr+0x36/0x90
[ 4562.099583] ? exc_general_protection+0x246/0x4a0
[ 4562.099593] ? asm_exc_general_protection+0x26/0x30
[ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau]
[ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau]
[ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau]
[ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau]
[ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0
[ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm]
[ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270
[ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau]
[ 4562.100356] __do_fault+0x32/0x150
[ 4562.100362] do_fault+0x7c/0x560
[ 4562.100369] __handle_mm_fault+0x800/0xc10
[ 4562.100382] handle_mm_fault+0x17c/0x3e0
[ 4562.100388] do_user_addr_fault+0x208/0x860
[ 4562.100395] exc_page_fault+0x7f/0x200
[ 4562.100402] asm_exc_page_fault+0x26/0x30
[ 4562.100412] RIP: 0033:0x9b9870
[ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7
[ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246
[ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000
[ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066
[ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000
[ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff
[ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 4562.100446] </TASK>
[ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: af_bluetooth: Fix deadlock
Attemting to do sock_lock on .recvmsg may cause a deadlock as shown
bellow, so instead of using sock_sock this uses sk_receive_queue.lock
on bt_sock_ioctl to avoid the UAF:
INFO: task kworker/u9:1:121 blocked for more than 30 seconds.
Not tainted 6.7.6-lemon #183
Workqueue: hci0 hci_rx_work
Call Trace:
<TASK>
__schedule+0x37d/0xa00
schedule+0x32/0xe0
__lock_sock+0x68/0xa0
? __pfx_autoremove_wake_function+0x10/0x10
lock_sock_nested+0x43/0x50
l2cap_sock_recv_cb+0x21/0xa0
l2cap_recv_frame+0x55b/0x30a0
? psi_task_switch+0xeb/0x270
? finish_task_switch.isra.0+0x93/0x2a0
hci_rx_work+0x33a/0x3f0
process_one_work+0x13a/0x2f0
worker_thread+0x2f0/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe0/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
spi: lpspi: Avoid potential use-after-free in probe()
fsl_lpspi_probe() is allocating/disposing memory manually with
spi_alloc_host()/spi_alloc_target(), but uses
devm_spi_register_controller(). In case of error after the latter call the
memory will be explicitly freed in the probe function by
spi_controller_put() call, but used afterwards by "devm" management outside
probe() (spi_unregister_controller() <- devm_spi_unregister() below).
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
...
Call trace:
kernfs_find_ns
kernfs_find_and_get_ns
sysfs_remove_group
sysfs_remove_groups
device_remove_attrs
device_del
spi_unregister_controller
devm_spi_unregister
release_nodes
devres_release_all
really_probe
driver_probe_device
__device_attach_driver
bus_for_each_drv
__device_attach
device_initial_probe
bus_probe_device
deferred_probe_work_func
process_one_work
worker_thread
kthread
ret_from_fork |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Only free buffer VA that is not NULL
In the MediaTek vcodec driver, while mtk_vcodec_mem_free() is mostly
called only when the buffer to free exists, there are some instances
that didn't do the check and triggered warnings in practice.
We believe those checks were forgotten unintentionally. Add the checks
back to fix the warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix delete_endpoint() vs parent unregistration race
The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of
ports (struct cxl_port objects) between an endpoint and the root of a
CXL topology. Each port including the endpoint port is attached to the
cxl_port driver.
Given that setup, it follows that when either any port in that lineage
goes through a cxl_port ->remove() event, or the memdev goes through a
cxl_mem ->remove() event. The hierarchy below the removed port, or the
entire hierarchy if the memdev is removed needs to come down.
The delete_endpoint() callback is careful to check whether it is being
called to tear down the hierarchy, or if it is only being called to
teardown the memdev because an ancestor port is going through
->remove().
That care needs to take the device_lock() of the endpoint's parent.
Which requires 2 bugs to be fixed:
1/ A reference on the parent is needed to prevent use-after-free
scenarios like this signature:
BUG: spinlock bad magic on CPU#0, kworker/u56:0/11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023
Workqueue: cxl_port detach_memdev [cxl_core]
RIP: 0010:spin_bug+0x65/0xa0
Call Trace:
do_raw_spin_lock+0x69/0xa0
__mutex_lock+0x695/0xb80
delete_endpoint+0xad/0x150 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
detach_memdev+0x15/0x20 [cxl_core]
process_one_work+0x1e3/0x4c0
worker_thread+0x1dd/0x3d0
2/ In the case of RCH topologies, the parent device that needs to be
locked is not always @port->dev as returned by cxl_mem_find_port(), use
endpoint->dev.parent instead. |
