Search

Search Results (428946 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-129182 1 Php 1 Php 2026-11-19 N/A
Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown. A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution. This issue affects PHP versions 8.5.* before 8.5.13.
CVE-2026-99455 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: serial: core: shut down initialized port on removal When a serial port configured as a console is opened and subsequently closed, tty_port_shutdown() skips invoking port->ops->shutdown() because port->console is true. As a result, tty_port_initialized() remains true and the port's interrupt handler stays registered in the irq subsystem. If the underlying device is later unbound or removed (e.g. via sysfs driver unbind or device hot-unplug), serial_core_remove_one_port() unregisters the console, frees uport->name via kfree(), and tears down the port without shutting it down or freeing its IRQ. Consequently, the irqaction descriptor remains registered in genirq with action->name pointing to freed memory. This triggers a use-after-free read whenever genirq accesses action->name, such as when reading /proc/interrupts: BUG: KASAN: slab-use-after-free in string+0x476/0x570 Call Trace: string+0x476/0x570 vsnprintf+0x422/0x1300 seq_printf+0x... show_interrupts+... Fix this by acquiring port->mutex in serial_core_remove_one_port() after console unregistration, clearing port->console under the mutex to prevent data races with concurrent tty_port_shutdown(), and invoking uart_shutdown(NULL, state) if the port remains initialized. This ensures that port->ops->shutdown() is called and the IRQ is freed before kfree(uport->name).
CVE-2026-99454 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix protected RX frame validation in decrypt path The RX software decrypt path mishandles crafted protected frames from a malicious AP in two ways: 1) decryptor() never checks that a protected frame is long enough to hold the 802.11 header plus the per-cipher trailer. All of rtw_wep_decrypt(), rtw_tkip_decrypt() and rtw_aes_decrypt() compute length = hdr.len - hdrlen - iv_len; and act on the result, and recvframe_chkmic() similarly computes datalen = hdr.len - hdrlen - iv_len - icv_len - 8; for TKIP (the 8-byte Michael MIC is not accounted for in icv_len). A frame shorter than hdrlen + iv_len + icv_len (+ 8 for TKIP) underflows these unsigned subtractions, turning into a ~4 GiB iteration count in aes_decipher()/arc4_crypt()/rtw_seccalctkipmic() or a ~4 GiB crc32_le() length, causing out-of-bounds reads/writes of up to ~4 GiB starting from the rx skb. Reject such frames in decryptor() before touching the IV; this covers all three ciphers and the TKIP MIC check, and also keeps the unconditional iv[3] access within the frame. 2) validate_80211w_mgmt() keeps using the frame - two memcpys through the stale rx_data pointer and a pkt_len update - before checking whether decryptor() returned NULL. On decrypt failure (e.g. a unicast protected deauth/disassoc/action frame with a bad MIC, which this path always software-decrypts) the skb has already been freed, so this is a use-after-free read/write, and the caller's error path frees the frame a second time, drifting free_recvframe_cnt. Bail out immediately when decryptor() fails, freeing the temporary mgmt_DATA buffer first. Discovered by Atuin - Automated Vulnerability Discovery Engine.
CVE-2026-99453 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: xen-blkfront: unbind irq before tearing down ring and shadow requests In blkif_free_ring(), the driver tears down the ring's persistent grants, shadow request arrays, and shared ring structure (xenbus_teardown_ring), and only calls unbind_from_irqhandler() at the very end. While blkif_free_ring() is freeing persistent grants and clearing the shadow array, the event channel interrupt (blkif_interrupt) is still registered and active. If an interrupt arrives from the backend during this teardown window, blkif_interrupt() reads rinfo->ring.sring and, via blkif_completion(), accesses rinfo->shadow[id].grants_used and rinfo->shadow[id].sg. blkif_free_ring() tears these structures down without holding rinfo->ring_lock, and the handler only checks info->connected at entry, so this is a real race resulting in a use-after-free or NULL pointer dereference. Fix this by moving unbind_from_irqhandler() to the beginning of blkif_free_ring(). Calling unbind_from_irqhandler() first frees the IRQ and synchronizes with any in-flight interrupt handlers on other CPUs before ring memory and shadow request structures are deallocated, matching the teardown order in drivers/net/xen-netfront.c.
CVE-2026-99452 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: delete channel-context timers on deinit ath9k_deinit_channel_context() cancels chanctx_work but does not delete the offchannel and sched timers set up by ath9k_init_channel_context(). If either timer fires after deinit (e.g. during driver unload or suspend), it accesses sc->sc_ah which may already be freed by ath9k_hw_deinit(), causing a use-after-free. Delete both timers with timer_shutdown_sync() before cancelling the work item.
CVE-2026-99451 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: unlink TWT flow if the MCU rejects the agreement mt7996_mac_add_twt_setup() links a new flow into dev->twt_list before asking the MCU to add the agreement, but exits without unlinking the flow if the request fails. The flow-ID and table masks are only committed after MCU success, so the still-linked flow is invisible to the mask-gated teardown paths. If the station retries the setup, the same slot is cleared and its embedded list node reinitialized while it is still linked, corrupting dev->twt_list. If the station disassociates instead, teardown skips the flow and station storage can be freed while the node remains linked. A later scheduling or debugfs twt_stats walk can then dereference the freed flow, resulting in a use-after-free. Unlink the flow when the MCU rejects the agreement. This restores the list to its pre-request state while leaving the unchanged mask and agreement accounting untouched.
CVE-2026-99450 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: vfio/nvgrace-gpu: Use a core-only open_device in fallback mode When the ACPI memory properties are missing or the C2C link is down, the device is exposed through nvgrace_gpu_pci_core_ops. That table opens through nvgrace_gpu_open_device() but closes through vfio_pci_core_close_device(), so open and close are not symmetric. nvgrace_gpu_open_device() registers nvdev->usemem for poison handling unconditionally. In fallback mode usemem.memlength is zero, and register_pfn_address_space() inserts a node covering [0, ULONG_MAX]. Nothing removes it: a second open fails with -EBUSY, and once the device is unbound the node outlives the nvdev that contains it. The next open after a rebind reports: BUG: KASAN: slab-use-after-free in interval_tree_iter_first+0x209/0x310 Read of size 8 at addr ffff88800894aa30 by task nvgrace_repro/203 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 print_report+0x153/0x4c6 kasan_report+0xe4/0x1a0 interval_tree_iter_first+0x209/0x310 register_pfn_address_space+0x97/0x100 nvgrace_gpu_open_device+0x21c/0x730 vfio_df_open+0x213/0x520 vfio_df_ioctl_bind_iommufd+0x3e8/0x6e0 vfio_device_fops_unl_ioctl+0x782/0x1570 __x64_sys_ioctl+0x13c/0x1c0 do_syscall_64+0x106/0x630 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 188: ... _vfio_alloc_device+0x3a/0x500 nvgrace_gpu_probe+0xcb/0x660 local_pci_probe+0xcf/0x170 ... Freed by task 188: ... kfree+0x20d/0x600 device_release+0xcf/0x250 kobject_put+0x152/0x2f0 pci_device_remove+0xb0/0x1c0 device_release_driver_internal+0x38d/0x540 unbind_store+0xde/0x100 ... Give the fallback table its own open_device that only calls vfio_pci_core_enable() and vfio_pci_core_finish_enable(), the counterpart of vfio_pci_core_close_device(). Fallback mode then never touches the nvgrace memory regions, as Alex suggested. This should be safe because the fallback table uses the vfio-pci core read, write and mmap handlers, so nothing there uses the state nvgrace_gpu_open_device() sets up. The one visible difference is that a fallback open no longer fails when BAR0 cannot be mapped, which matches vfio-pci.
CVE-2026-99449 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: fix refcount underflow in gadgetfs_bind() error path gadgetfs_bind() calls get_dev() only on the success path, but gadgetfs_unbind() called from the enomem error label unconditionally calls put_dev(). When bind fails (e.g. ENOMEM), put_dev() fires without a matching get_dev(), leaving the refcount unbalanced. A subsequent close of the ep0 file descriptor calls dev_release() -> put_dev() which hits zero and frees the object; then gadgetfs_kill_sb() calls put_dev(the_device) again on the already-freed pointer, triggering a refcount underflow and use-after-free. Fix by calling get_dev() at the start of gadgetfs_bind(), before any error path that invokes gadgetfs_unbind(), so the reference is always balanced regardless of whether bind succeeds or fails.
CVE-2026-99448 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: ufs: use u64 for directory size in ufs_last_byte ufs1_read_inode() and ufs2_read_inode() copy the untrusted 64-bit on-disk size into inode->i_size. ufs_last_byte() then truncates that value to an unsigned int before calculating the valid extent of a directory folio. A directory size of exactly 4 GiB is truncated to zero. In ufs_find_entry(), subtracting the requested record length from that zero forms an endpoint almost 4 GiB beyond the mapped folio. A crafted UFS2 image produces: BUG: KASAN: use-after-free in ufs_find_entry+0x583/0x6e0 [ufs] Read of size 1 ... ufs_find_entry ufs_inode_by_name ufs_lookup __lookup_slow path_lookupat The KASAN classification reflects that the adjacent physical page was free; the source-level operation is an out-of-folio read. A controlled UFS1 test with CONFIG_UFS_FS_WRITE enabled also made ufs_find_entry() return a directory entry from an adjacent anonymous page. unlink() then passed that pointer to ufs_delete_entry(), which cleared the adjacent page's 3 2-bit d_ino. This write result reproduced three out of three times. UFS normally requires a privileged mount path. A relevant boundary is a privileged automounter or image-processing service handling an attacker-supplied filesystem. The write primitive additionally requires UFS1 to be mounted read-write with CONFIG_UFS_FS_WRITE enabled; the read is reachable with read-only UFS2. Keep the intermediate size arithmetic at 64 bits so non-final pages are bounded at PAGE_SIZE. With this change, the same controlled tests reach the real on-disk directory entry and produce no adjacent-page write or KASAN report. A reproducer and full validation logs are available on request. The vulnerable helper is present in v7.2-rc3, v7.1, v6.18.38, v6.12.95, v6.6.111, and upstream master at 1229e2e57a5c. Runtime reproduction and fix validation were performed in an x86-64 QEMU guest running v7.2-rc3 with generic KASAN.
CVE-2026-99447 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: spi: spi-pci1xxxx: quiesce DMA engines on transfer timeout If a DMA-mapped transfer times out waiting for DMA_TERM and neither DMA abort interrupt arrived, pci1xxxx_spi_transfer_with_dma() returns through the error label while both DMA engines are still enabled, the done/abort interrupt status is still armed and the transfer state (p->xfer, p->tx_sgl, p->rx_sgl) is still registered. The ISRs keep firing afterwards: they reprogram the DMA engines from p->tx_sgl / p->rx_sgl and signal completion through p->xfer and p->spi_xfer_done, all of which the SPI core is free to unmap or reuse once transfer_one() has returned, which is a use-after-free. A late done interrupt can also start the next transfer queued behind the failed one. Stop both DMA engines, drain the pending done/abort interrupt status and synchronize the DMA IRQs before dropping the in-progress state and the transfer pointers, and re-enable the engines afterwards so that subsequent transfers keep working. The engines are only turned back on once both were confirmed to have stopped: re-enabling an engine that failed to stop would cancel the pending stop request and let it keep running into buffers the SPI core is about to unmap or free, which is exactly the window this patch closes. An engine that failed to stop is left disabled, as the abort paths already do. The DMA interrupt status and mask registers are shared between the two SPI instances, so the cleanup drains only this instance's done/abort status bits instead of masking the interrupt lines, which would also suppress the peer instance's completion interrupts. Also make the DMA ISRs ignore interrupts while no transfer is in progress so that a stray MSI after the cleanup can no longer act on the cleared state. No PCI1XXXX hardware was available for testing and QEMU has no model of this PCIe part, so the timeout path was exercised with a userspace replica of the timeout branch and the DMA ISRs, with the register and interrupt accesses mocked: on the unfixed code both a wedged engine that clears after the timeout and a late done interrupt touch the freed transfer state, while with this fix applied neither does and an engine that failed to stop is left disabled. The module was also loaded and unloaded in a QEMU x86_64 guest running a kernel with this fix applied.
CVE-2026-99446 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: phy: core: Fix race-condition between _of_phy_get() and try_module_get() Sashiko asked during a patch review if the existing usage pattern had a race condition; specifically in of_phy_get() if it was possible between returning from _of_phy_get() and running try_module_get() that a module might be unbound leading to use-after-free. Looking at the code this appears to be so, there is no linkage between the phy and module under a synchronisation primitive. Using the phy_provider_mutex in phy_get() will ensure there is a link between the returned phy pointer and the module_get() bumping the module reference count. Amend phy_get(), of_phy_get() and devm_of_phy_get_by_index() to fix the same usage pattern. phy_provider_unregister() must take the phy_provider_mutex so amending phy_get()/of_phy_get() to take that same mutex guarantees there is no use-after-free.
CVE-2026-99445 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: power: supply: pf1550: drain IRQ work before unregistering supplies The VBUS work calls power_supply_changed(), but its managed cancellation is registered before the supplies. Cleanup can therefore unregister a supply while IRQ-triggered work is still pending. Commit 838767f50747 ("power: supply: pf1550: Fix use-after-free in power_supply_changed()") moved IRQ requests after supply registration, but left work cancellation before the supplies. That change protects the direct IRQ callbacks, while this fix drains the work they queue. Register the three work items after both supplies and before the IRQs. Cleanup then frees the IRQ producers, drains the work, and unregisters the supplies. The teardown ordering issue was found by static analysis.
CVE-2026-99444 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: power: supply: sbs-battery: disable polling before supply teardown The managed poll-work cancellation is registered before the power supply, so cleanup unregisters the supply before draining polling. A pending or running poller can then call power_supply_changed() on the released supply. Commit 8d59cf3887fb ("power: supply: sbs-battery: Fix use-after-free in power_supply_changed()") moved the IRQ request after supply registration, but did not change the poll-work cancellation order. Add a later managed action that disables and drains polling before supply teardown. Its retained disabled state prevents external-power callbacks from rearming the poll work after it has been drained. Keep the original autocancel to initialize work before supply callbacks can run and to cover failed supply registration. The teardown ordering issue was found by static analysis.
CVE-2026-99443 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: pps: generators: don't use the driver's info after unregister A file that was opened before pps_gen_unregister_source() keeps pps_gen, and with it the pointer to the driver's pps_gen_source_info. PPS_GEN_SETENABLE and PPS_GEN_USESYSTEMCLOCK keep using that pointer after the driver has gone: - pps_gen_tio allocates its info with devm_kzalloc(), so after an unbind both ioctls read freed memory, and SETENABLE calls the driver's enable() with its freed private data. - pps_gen-dummy does not set info->owner, so it can be unloaded while the file is open, and the ioctls then read the unloaded module's data and call its code. TIO can't probe in a VM, as it needs ART. A test driver that registers its info in devm memory like TIO does, unbound while /dev/pps-gen0 is open, gives: BUG: KASAN: slab-use-after-free in pps_gen_cdev_ioctl+0x4c1/0x580 Read of size 1 at addr ffff88800e647f38 by task ppsgen64/145 ... Freed by task 146: kfree+0x25a/0x6d0 release_nodes+0xd1/0x140 devres_release_all+0x10e/0x1a0 device_unbind_cleanup+0x71/0x250 device_release_driver_internal+0x41b/0x570 unbind_store+0xd9/0x100 and unloading pps_gen-dummy while its file is open oopses: BUG: unable to handle page fault for address: ffffffffa0203040 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:pps_gen_cdev_ioctl+0x372/0x580 Protect info in the ioctl handler with a mutex, and clear it under the mutex on unregister, so that unregister waits for the ioctls using it and later ones fail with -ENODEV. PPS_KC_BIND does the same for a removed PPS device since commit 3649f9a6b897 ("pps: don't allow PPS_KC_BIND on removed devices"). The sysfs attributes need nothing new: they are removed, and their callbacks drained, before info is cleared.
CVE-2026-99442 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: nvmem: core: Fix OOB read for bit offsets of more than one byte When the bit offset is BITS_PER_BYTE or larger the read position is advanced by `bytes_offset`. This is not taken into account in the per-byte read loop which still reads `cell->bytes` resulting in an out of bounds read of `bytes_offset` bytes. The information read OOB does not leak directly as the erroneously read bits are cleared. Detected by KASAN while looking for a use-after-free in simplefb.c.
CVE-2026-99441 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: serialize access to DH-HMAC-CHAP state to fix UAF A REPLY AUTH_SEND command can derive a dhchap_skey key while a concurrent AUTH_RECEIVE command observing this REPLY state executes the failure path and frees that key. The REPLY command then continues and writes into freed memory, causing a use-after-free. KASAN reports it as: BUG: KASAN: slab-use-after-free in __sha256_final Write of size 4 at addr ffff88800359c540 ... nvmet_auth_sq_free (drivers/nvme/target/auth.c:237) nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:621) Add a mutex to each submission queue to serialize authentication commands and timeout handling. Unlock the mutex before completing requests and ignore outdated timeout callbacks. Limit timeout delays to prevent immediate expiry on 32-bit kernels.
CVE-2026-99440 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: rc: Ensure that rc_unregister_device() does not free input device During or after rc_unregister_device(), IR may still be reported which results in a input event being reported. This could result in a null pointer deref in rc_keydown() or a use-after-free of the input device if the pointer was read before it is set to NULL.
CVE-2026-99439 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: rc: Ensure registered is cleared in error path If rc_register_device() fails, ensure that registered is not set to true. If lirc_register() succeeded, then userspace could have an open file descriptor open. This leads to a use-after-free. lirc_unregister() must be called with registered = false, else there is a possibility that an fd is open and polling, which would never return POLLERR unless registered is false. Note that registered must be changed under dev->lock, many functions read registered under lock (e.g. lirc_ioctl).
CVE-2026-99438 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: rc: mce_kbd: Fix inconsistent locking of keylock data->keylock is taken with spin_lock() in ir_mce_kbd_decode(), which runs in the raw IR decode kthread with local interrupts enabled, but with spin_lock_irqsave() in mce_kbd_rx_timeout(), the rx_timeout timer callback, which runs in softirq context. If the decode kthread is holding keylock via spin_lock() when a timer interrupt fires on the same CPU and the softirq runs mce_kbd_rx_timeout(), the softirq spins forever waiting for a lock that only the now-preempted kthread can release, while the kthread cannot run again until the softirq gives up the CPU. This deadlocks the CPU.
CVE-2026-99437 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: rc: Use after free in ir_raw_event_handle() If rc_unregister_device() is called while IR is being processed, then ir_raw_event_handle() could call wake_up_process(dev->raw->thread) after kthread_stop(dev->raw->thread). Avoid use after free by using get_task_struct().