| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: nxp-sar-adc: fix division by zero in write_raw
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero or a negative value to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel.
Also prevent unsigned integer underflow when the computed cycle count is
smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to
a huge value. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: mt6359: fix unchecked return value in mt6358_read_imp
In mt6358_read_imp(), the variable val_v is passed to regmap_read()
but the return value is not checked. If the read fails, val_v remains
uninitialized and its random stack content is subsequently reported
as a measurement result.
Initialize val_v to zero to ensure a predictable value is reported
in case of bus failure and to prevent potential stack data leakage.
This also satisfies static analyzers that might otherwise flag the
variable as used uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: xpad - fix out-of-bounds access for Share button
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
__set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold()
before scheduling the delayed work. The normal path in
l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the
end, but the early return when chan->conn is NULL skips the put,
leaking the reference.
Add the missing l2cap_chan_put() before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: line-display: fix OOB read on zero-length message_store()
linedisp_display() unconditionally reads msg[count - 1] before
checking whether count is zero, so a write of zero bytes to the
message sysfs attribute hits msg[-1]:
write(fd, "", 0);
-> message_store(..., buf, count=0)
-> linedisp_display(linedisp, buf, count=0)
-> msg[count - 1] == '\n' ; OOB read
The kernfs write buffer for that store is a 1-byte allocation
(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),
so msg[-1] is a 1-byte read before the slab object. On a
KASAN-enabled kernel this trips an out-of-bounds report and
panics; on stock kernels it silently reads adjacent slab data
and, if that byte happens to be '\n', the following count--
wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().
linedisp_display() is reached from the message_store() sysfs
callback (drivers/auxdisplay/line-display.c message attribute,
mode 0644) and from the in-tree initial-message setup with
count == -1, so the OOB path is only userspace-triggerable via
zero-byte writes; vfs_write() does not short-circuit on
count == 0 and kernfs_fop_write_iter() dispatches the store
callback regardless.
Guard the trailing-newline trim with a count check. The
existing if (!count) block then takes the clear-display path
unchanged.
Affects every auxdisplay driver that registers via
linedisp_register() / linedisp_attach(): ht16k33, max6959,
img-ascii-lcd, seg-led-gpio. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| Chamilo LMS is an open-source learning management system. From 2.0.0 until 2.0.1, `GET /user/{username}` is anonymously reachable and renders six user-editable profile fields (`firstname`, `lastname`, `competences`, `openarea`, `teach`, and `diplomas`) inside `{% autoescape false %}`, without server-side sanitization on the write path. A ROLE_STUDENT attacker can plant HTML in their own profile; self-registration, when enabled, lets an otherwise anonymous attacker obtain that role. The stored content executes in the browser of any visitor, including administrators, who follows the public profile link, potentially allowing account takeover through session, JWT, or `localStorage` exfiltration. This issue is fixed in version 2.0.1. |
| SOCFortress CoPilot focuses on providing a single pane of glass for all your security operations needs. In affected deployments, the unauthenticated `/scoutsuite-report` `StaticFiles` mount in `backend/copilot.py` exposes the `scoutsuite-report` directory even though normal /api routes require JWT authentication. Generated HTML reports and `scoutsuite-results/scoutsuite_results_<name>.js` files disclose AWS, Azure and GCP IAM principals, resource inventories, misconfigurations and findings. Report names derive from caller-selected names with predictable defaults. During an admin- or analyst-initiated GCP scan, `backend/app/integrations/scoutsuite/routes/scoutsuite.py` saves the uploaded Google service-account JSON key into that same web-served directory. In `backend/app/integrations/scoutsuite/services/scoutsuite.py`, `generate_gcp_report_background` removes the key only after the scan finishes. Any anonymous client that can reach the host and request the file path can therefore retrieve the private key during the scan and use the service account's cloud permissions, as well as read retained cloud-security reports. Credential isolation is released in version 0.1.77; a release fully remediating the report-disclosure component has not been established. |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise Oracle SOA Suite. While the vulnerability is in Oracle SOA Suite, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle SOA Suite. CVSS 3.1 Base Score 10.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle SOA Suite. While the vulnerability is in Oracle SOA Suite, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle SOA Suite accessible data. CVSS 3.1 Base Score 8.6 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:N). |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle SOA Suite. While the vulnerability is in Oracle SOA Suite, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle SOA Suite accessible data as well as unauthorized access to critical data or complete access to all Oracle SOA Suite accessible data. CVSS 3.1 Base Score 9.6 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:N). |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle SOA Suite. While the vulnerability is in Oracle SOA Suite, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle SOA Suite accessible data. CVSS 3.1 Base Score 8.6 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:N). |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Adapters). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle SOA Suite. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle SOA Suite accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle SOA Suite. CVSS 3.1 Base Score 9.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H). |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle SOA Suite. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle SOA Suite accessible data as well as unauthorized update, insert or delete access to some of Oracle SOA Suite accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:N). |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle SOA Suite. While the vulnerability is in Oracle SOA Suite, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle SOA Suite accessible data as well as unauthorized update, insert or delete access to some of Oracle SOA Suite accessible data. CVSS 3.1 Base Score 9.3 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:L/A:N). |
| SOCFortress CoPilot focuses on providing a single pane of glass for all your security operations needs. Prior to 0.1.76, `verify_graylog_header` in `backend/app/active_response/routes/graylog.py` and `verify_velociraptor_header` in `backend/app/incidents/routes/incident_alert.py` authenticate webhooks against `GRAYLOG_API_HEADER_VALUE` and `VELOCIRAPTOR_API_HEADER_VALUE` with the same publicly hardcoded fallback. The same default is shipped in `.env.example`. Deployments that leave either setting unset or unchanged permit an anonymous caller with the known header value to bypass the JWT authentication required by normal APIs. `POST /api/graylog/invoke` forwards attacker-selected `COMMAND`, `ACTION`, `VALUE` and `AGENT_ID` to the configured Wazuh manager without the command-enum validation of the authenticated invocation route, allowing active-response scripts to disrupt endpoints and manipulate defensive controls. `POST /api/incidents/alerts/create/threshold` and `POST /api/incidents/alerts/create/velo-sigma` accept forged alerts for arbitrary `customer_code` values and drive attacker-controlled OpenSearch queries. Active-response delivery requires a configured reachable Wazuh manager. Deployments with independently changed header secrets are not subject to this default-secret bypass. This issue is fixed in version 0.1.76. |
| Netsweeper before 4.0.11 and 4.1.0 before 4.1.5 contains a reflected cross-site scripting vulnerability in webadmin/reporter/view_server_log.php that allows remote attackers to execute arbitrary JavaScript by injecting malicious code through the log request parameter, which is reflected into the HTML response without output encoding. Attackers can craft a malicious URL and induce a user to request it, resulting in arbitrary JavaScript execution within the victim's browser session against the Netsweeper web administration interface. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-19. |
| DedeCMS before 5.7 contains a file inclusion vulnerability in plus/carbuyaction.php that allows remote unauthenticated attackers to control the include path by manipulating the uninitialized code parameter passed to require_once. Attackers can supply path traversal sequences ../../ to include arbitrary local files outside the intended payment directory, potentially achieving local file disclosure. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-18. |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle SOA Suite. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle SOA Suite accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| SOCFortress CoPilot focuses on providing a single pane of glass for all your security operations needs. In affected snapshots preceding the respective 0.1.70 and 0.1.76 sink repairs, portal users, including `customer_user`, can submit stored markup through `POST /api/incidents/db_operations/alert/comment`. In `customer-portal/src/components/alerts/AlertDetails/AlertComment.vue`, `commentHtml` replaces newlines in `comment.comment` but passes the result to `v-html` without escaping or sanitizing HTML. When another user views the poisoned alert, stored script executes on the application origin; the same unsanitized rendering pattern affects server-stored SOC case, asset and health-check fields in `SocCaseNote.vue`, `SocCaseItem.vue`, `SocCaseAssetsItem.vue`, `SocAlertAssetsItem.vue` and `HealthcheckItem.vue`. The authentication store in `customer-portal/src/stores/auth.ts` persists both access and refresh tokens in JavaScript-readable storage, and `customer-portal/src/api/httpClient.ts` uses bearer headers rather than HttpOnly cookies. An injected script can steal both tokens, impersonate the viewer and obtain fresh tokens through `/auth/refresh`. If an analyst or administrator views the poisoned alert or case, this enables persistent privileged account takeover, cross-tenant data access, incident modification or deletion, and detection/response subversion. The health-check sink repair is first contained in version 0.1.70, while the comment and other SOC sink repairs are first contained in version 0.1.76. Version 0.1.76 is the provisional first release containing all observed repairs; grouped versus split CVE scope requires curator adjudication. |
