| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderx: fix PTP device ref leak in nicvf_probe()
cavium_ptp_get() acquires a reference to the PTP PCI device
through pci_get_device(). If any initialization step fails
after cavium_ptp_get(), the PTP PCI device reference is leaked.
Add a common error path to release the PTP reference before
returning from probe failures. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_flower: Fix port range register leak in tmplt_create()
mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template
into a stack-local struct mlxsw_sp_acl_rule_info purely to compute
rulei.values.elusage. Parsing can acquire port range registers via
mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes
through mlxsw_sp_acl_rulei_destroy(), those registers were never
released, including through chain template deletion.
Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually
release the necessary resources and call from
mlxsw_sp_flower_tmplt_create() to plug the leak.
The issue was found during a review of Wentao Liang's patch referenced
below. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: free iov when btrfs_uring_read_extent() fails
After btrfs_uring_read_extent(), the caller always jumped to out_acct.
That skips kfree(data->iov), which is only correct for -EIOCBQUEUED
where the deferred path owns the iov. On failure, fall through to
out_free instead. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check a recursive bind mount for mount namespace loops
do_loopback() refuses to bind mount the file of a mount namespace that
is as old as the caller's or older because a mount namespace that holds
a mount of its own file, or of an ancestor's, would cause a cycle. But
it only checks the dentry the bind mount starts from. With MS_REC
everything below it is copied and do_loopback() passes
CL_COPY_MNT_NS_FILE so mount namespace files below the source are
copied.
That's fine for a source in the caller's own mount namespace. Every
mount namespace file in there passed the same check when it was
bind-mounted. It isn't fine for a source in another mount namespace.
may_copy_tree() accepts a bind mount of any nsfs or pidfs file no matter
what mount namespace it lives in so that /proc/<pid>/ns/<ns> and pidfds
can be bind mounted. If we create a bind-mount stack of mount namespaces
file descriptors the kernel will copy them irrespective of their
ancestoral relationship to the mount namespace in question:
151 146 0:7 net:[4026531833] /tmp/nrc/y rw - nsfs nsfs rw
152 151 0:7 mnt:[4026532293] /tmp/nrc/y rw - nsfs nsfs rw
Mount 152 is a mount of the mount namespace file of mount namespace
4026532293 inside mount namespace 4026532293. That namespace and every
mount in it are leaked... All it takes is a process in an older mount
namespace that stacks the file and repeating it leaks without limit:
after control: Shmem: 380 kB
child: mount(/proc/self/fd/6, MS_BIND|MS_REC): ok
after cycle: Shmem: 65916 kB
do_move_mount() runs check_for_nsfs_mounts() over a detached tree for
exactly that reason. Do the same for the copy before it is grafted. |
| A missing release of backend receiver sessions in the Ad Hoc Transfer component of Progress Software WS_FTP Server versions prior to 2024.0.7 and 2025.0.4 on Windows could lead to server resource exhaustion and service degradation. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: free the skb when the DLC has no owner
rfcomm_recv_data() hands the skb to d->data_ready() and returns 0
without freeing it, so the callback owns the skb from that point on.
The tty implementation frees it when the DLC has been detached from its
device:
static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc,
struct sk_buff *skb)
{
struct rfcomm_dev *dev = dlc->owner;
if (!dev) {
kfree_skb(skb);
return;
}
The socket implementation returns without freeing it, and the skb is
leaked.
A connected DLC can have no owner: rfcomm_sock_destruct() clears
d->owner, while the DLC itself stays on the session until it is closed.
Data frames that arrive in that window still find d->state ==
BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one
leaked skb each.
The leak does not stop on its own either. The remote runs out of
credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only
place that sets it is rfcomm_sk_data_ready() itself, below the return.
rfcomm_process_dlcs() keeps granting credits, so the remote keeps
sending and the leak keeps growing.
Free the skb, as the tty side does. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak when rings are stopped
GVE does not free XSK buffers when resetting ring state as a part of
stopping queues. This causes all XSK buffers which are posted to the
NIC to be leaked.
Free XSK buffers attached to an allocated buf_state when stopping rings.
This issue was hit in production. |
| P-Net before 1.0.3 does not release the Application Relationship (AR) and the RPC session when an RPC request is rejected because its data representation has incorrect endianness. The session and its AR remain allocated, so repeated requests exhaust the available sessions. Once they are exhausted the device no longer answers new RPC requests, including Connect, until it is restarted. A remote unauthenticated attacker can use this to cause a denial of service. |
| P-Net before 1.0.3 does not release the RPC session allocated for an RPC request that names an unknown interface or object UUID, and does not start a timeout for it. Repeated requests with different activity UUIDs exhaust the available sessions. Once they are exhausted the device no longer answers new RPC requests, including Endpoint Mapper Lookup and Connect, until it is restarted. A remote unauthenticated attacker can use this to cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
ipc: drop the mqueue mount with kern_unmount() on setup failure
mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its
->mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls
or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain
mntput(). With ->mnt_ns set that takes the fast path of
mntput_no_expire(). The count drops to zero and nothing ever kills the
mount, so the mount and the mqueue superblock are leaked.
Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace")
added the first failure path after mq_init_ns() and never dropped the
mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on
sysctl setup failure") tried to fix that with a mntput() but that
doesn't help for a long-term mount.
Use kern_unmount(). free_ipc() open-codes the same thing for a namespace
that made it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: free the userptr ranges when a CS fails after parser_bos
amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of
the BO list and looks up the user pages. Those ranges are only freed when
amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks
them under the notifier lock. If amdgpu_cs_patch_jobs(),
amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of
amdgpu_cs_submit() fails, nothing frees them: neither
amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e->range.
Each such CS then leaks the range, its hmm_pfns array (8 bytes per page
of the userptr BO) and the BO reference the range holds. An IB on a ring
that patches the CS in place (e.g. VCN) with an unmapped va_start fails
in amdgpu_cs_patch_ibs() and takes this path.
Free the ranges on those error paths. Ranges amdgpu_cs_submit() already
dropped are NULL, so freeing them again is a no-op.
(cherry picked from commit c52a9542ed7cfd527feb938bd0accada2ac8d267) |
| In the Linux kernel, the following vulnerability has been resolved:
power: sequencing: pcie-m2: Fix leaking array from of_regulator_bulk_get_all()
of_regulator_bulk_get_all() allocates the consumers array and hands it to
the caller, who is expected to free it at an appropriate time.
pwrseq-pcie-m2.c never did, leading to a memory leak.
Add an explicit kfree() for the consumers array. |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: free skb when broadcast has no txable port
bc_transmit() sends the original skb through the last txable port.
When no port is txable, it returns false without consuming the skb, but
team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the
skb and its socket write-memory charge.
A TX-enabled, link-down port keeps the broadcast transmit op installed.
Carrier can stay up through a second link-up, TX-disabled port or be
forced on by userspace. Free the original skb on the no-port path while
leaving the existing drop accounting intact.
Discovered by Sashiko during review of previous commit. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: account non-AQL frames per peer rather than per link
The driver increments wcid->non_aql_packets when a frame goes to the
hardware queue. The completion path decrements the counter again.
For an MLO peer, the hardware reports the completion on the link that it
used for the transmission. This link can differ from the link that the
driver queued the frame on. In that case, the increment and the
decrement go to different link wcids, and the count drifts upwards until
it blocks the station.
Keep the count on the wcid of the primary link, like the other peer-wide
state. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't stash io_uring encoded data across -EAGAIN
Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU
leaks if the request is cancelled or the ring exits before reissue.
io_uring does not free driver PDU allocations on cleanup.
Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so
return -EAGAIN before allocating and free data on every exit.
Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation
for btrfs_uring_read_finished(). |
| storage/pkg/archive.ApplyLayer and ApplyUncompressedLayer may, when processing corrupt or malicious inputs, leak a file descriptor; unbounded repeated calls can exhaust the process’ file descriptor
limit |
| Echo is a Go web framework. From 4.15.0 until 4.16.1 and 5.4.1, Echo's Proxy middleware can retain a handler, copy goroutines, and network connections after a WebSocket client disconnects when the upstream keeps its connection open. The raw proxy waits for both copy directions without reliably closing the peer connection when one direction ends, including when a rejected upgrade response uses HTTP keep-alive. Repeated connections can accumulate resources and cause denial of service, depending on proxy-route accessibility, upstream behavior, and connection deadlines. This issue is fixed in 4.16.1 and 5.4.1. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, keepalive timeout handling is absent during the initial portion of a request. An attacker can keep an idle connection open indefinitely before sending any request data, consuming server connection capacity. This issue is fixed in version 3.14.4. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix memory leak in gpiod_set_array_value_complex() on error paths
A drive-by review by Sashiko reports that, after a failed call to
gpiochip_set_multiple(), gpiod_set_array_value() returns abruptly,
bypassing the freeing of possibly alloced bitmaps, potentially leaking
memory. It is an unlikely error path, but is possible.
Defer the return code check until after the bitmap_free() block. |
| A flaw was found in SSSD. In configurations where the autofs responder service is enabled, memory allocated during successful request processing is not released until the client connection terminates. A local attacker can exploit this vulnerability by maintaining an open connection and repeatedly submitting valid requests, leading to memory exhaustion and a Denial of Service (DoS). |
