| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HTML::FormFu versions through 2.08 for Perl allow resource exhaustion via an unbounded repeat count from the query string in Repeatable elements.
When a Repeatable element has counter_name set, its process method reads the repeat count from the named query string parameter, checks only that it is a positive integer, and passes it to repeat, which deep-clones the element's child subtree once per iteration. Nothing caps the value, and no attribute lets an application impose a limit.
The count is read on every request, before the form decides whether it was submitted, so a plain GET reaches the clone loop with no credentials, no session and no request body. Nesting multiplies: a Repeatable inside a Repeatable takes a counter at each level, so an outer and an inner value of 100 build 10,000 clones.
Once the form is submitted, each cloned field's constraints scan the whole element tree in _find_field_value, so cost grows faster than linearly with the count. A single request exhausts memory and CPU.
The latest release on CPAN is 2.07, from 2018. Version 2.08 exists only in the git repository. |
| In the Linux kernel, the following vulnerability has been resolved:
perf tools: Use perf_env__get_cpu_topology() in machine__resolve()
machine__resolve() accesses env->cpu[al->cpu].socket_id after checking
al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu
against env->nr_cpus_avail. Since al->cpu comes from the untrusted
perf.data sample, a crafted file with a large CPU index causes an
out-of-bounds heap read.
Use perf_env__get_cpu_topology() which validates both NULL and bounds.
Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t):
without this, values like 65536 silently truncate to 0, bypassing the
accessor's internal check and returning CPU 0's topology. |
| DeadLetterPublishingRecovererFactory reads the retry_topic-original-timestamp header from an inbound ConsumerRecord and passes its raw bytes directly to new BigInteger(header.value()) with no length or format validation.
Spring for Apache Kafka 4.1.0
Spring for Apache Kafka 4.0.0 - 4.0.6
Spring for Apache Kafka 3.0.0 - 3.3.16
Spring for Apache Kafka 2.9.0 - 2.9.14
Spring for Apache Kafka 2.8.12 and earlier |
| The OpenRGB network protocol allows attackers to cause memory exhaustion and out-of-bounds memory reads and writes by passing inconsistent data. |
| An issue was discovered in openRISC OR1200 commit 83ac6b. A mismatch between the RTL and netlist can lead to unexpected behavior. |
| A stack-based buffer overflow vulnerability in the WatchGuard Fireware OS iked process iallows a remote unauthenticated attacker to create a Denial of Service (DoS) condition in VPN processing by sending specially crafted network traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix queue index used to wake the peer txq in veth_poll
veth_poll() derives the index of the peer TX queue to wake from
rq->xdp_rxq.queue_index. That field is only initialized by
xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an
XDP program is attached. On the plain GRO/NAPI path
(veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so
queue_index stays 0 for every queue, as priv->rq is zero-allocated.
So in a multi-queue setup with GRO enabled and no XDP program attached,
every NAPI instance looks at the peer's TX queue 0. If veth_xmit() stops
peer TX queue 1 because the ptr_ring is full (NETDEV_TX_BUSY), nothing
ever wakes it again: the poller draining queue 1 wakes queue 0 instead.
veth implements no ndo_tx_timeout, so the netdev watchdog does not kick
in either, and the queue stays stopped indefinitely.
Derive the index from the position of the rq within priv->rq instead,
which is correct regardless of whether XDP was ever enabled.
Scripts to reproduce the stall are available at
https://github.com/netoptimizer/veth-backpressure-performance-testing |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: fail early if address range parameters are invalid
The comment on top of `struct damon_region` clearly says that
For any use case, @ar should be non-zero positive size.
which is now verified in damon_verify_new_region() if the kernel is built
with DAMON_DEBUG_SANITY.
The WARN_ONCE() can be triggered if the mtier sample module is enabled
before node{0,1}_{start,end}_addr have been properly initialized, which is
obviously not good.
------------[ cut here ]------------
start 0 >= end 0
WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468
Call trace:
damon_new_region+0xf4/0x118 (P)
damon_set_regions+0xfc/0x3c0
damon_sample_mtier_build_ctx+0xe8/0x3a8
damon_sample_mtier_start+0x1c/0x90
damon_sample_mtier_enable_store+0x98/0xb0
param_attr_store+0xb4/0x128
module_attr_store+0x2c/0x50
sysfs_kf_write+0x58/0x90
kernfs_fop_write_iter+0x16c/0x238
vfs_write+0x2c0/0x370
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
invoke_syscall+0xa8/0x118
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x54/0x370
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Note that the same issue can happen if detect_node_addresses is true, and
node 0 or 1 is memoryless. Fix it together by checking the validity of
parameters right before damon_new_region() and fail early if they're
invalid. |
| ServiceNow has remediated a sandbox escape security issue that was identified in the Now Platform. This security issue could allow an unauthenticated user to execute arbitrary code within the Now Platform, potentially leading to more access to the Now Platform than intended.
ServiceNow deployed a security update to hosted instances and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances.
We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. |
| Starlette is a lightweight ASGI framework/toolkit. Prior to version 1.0.1, the HTTP `Host` request header was not validated before being used to reconstruct `request.url`. Because the routing algorithm relies on the raw HTTP path while `request.url` is rebuilt from the `Host` header, a malformed header could make `request.url.path` differ from the path that was actually requested. Middleware and endpoints that apply security restrictions based on `request.url` (rather than the raw `scope` path) could therefore be bypassed. Users should upgrade to a version greater than or equal to version 1.0.1, which validates the `Host` header against the grammar of RFC 9112 §3.2 / RFC 3986 §3.2.2 when constructing `request.url` and falls back to `scope["server"]` for malformed values. |
| The RSA and DSA public key parsers did not enforce size limits on key parameters. A crafted public key with an excessively large modulus or DSA parameter could cause several minutes of CPU consumption during signature verification. This could be triggered by unauthenticated clients during public key authentication. RSA moduli are now limited to 8192 bits, and DSA parameters are validated per FIPS 186-2. |
| The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege escalation in programs using the idna package. For example, a program which performs privilege checks on the ASCII hostname may reject "example.com" but permit "xn--example-.com". If that program subsequently converts the ASCII hostname to Unicode, it will inadvertently permits access to the Unicode name "example.com". |
| In Bouncy Castle for Java before 1.85, MLS wire decoder allocates attacker-declared opaque length before bounds check. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid combining some incoming suboptions
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are the rules:
Which options can be used together?
X: mutually exclusive
O: often used together
C: can be used together in some cases
P: could be used together but we prefer not to (optimisations)
| Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC |
|------|------|------|------|------|------|------|------|------|
| MPC |------|------|------|------|------|------|------|------|
| MPJ | X |------|------|------|------|------|------|------|
| DSS | X | X |------|------|------|------|------|------|
| ADD | X | X | P |------|------|------|------|------|
| RM | C | C | C | P |------|------|------|------|
| PRIO | X | C | C | C | C |------|------|------|
| FAIL | X | X | C | X | X | X |------|------|
| FC | X | X | P | X | X | X | X |------|
| RST | X | X | X | X | X | X | O | O |
|------|------|------|------|------|------|------|------|------|
The only difference is with the 'P': another stack could send and
ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be
allowed.
A few points of attention:
- In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is
no reason to add it with a SYN. Note that even with a 4th ACK, it
doesn't seem to be useful, except when IDs are known in advance via
another channel. Better not to break that.
- Now, combining both an MP_CAPABLE and an MP_JOIN will no longer
result to a reject of the two options, but only the second suboption
is ignored. That seems OK to do that for this unexpected error. At
least now all inconsistent combinations are handled the same way.
This could change later in next. This also means the explicit checks
for having both MPC + MPJ in subflow.c will now be unreachable.
That's fine, they will be removed in a follow-up patch.
- In case of conflicting combinations, the extra suboption(s) is/are
ignored: having such combinations either means the remote peer is
buggy, or is evil. The simplest action is then taken in this case:
stop processing the current suboption.
- In mp_opt->suboptions, there is also a bit reserved to the checksum,
which can be used in an MP_CAPABLE and a DSS. Each time a DSS option
can be used in parallel with another option, the checksum can be set,
so the verification is combined into a new OPTIONS_MPTCP_DSS macro.
- An MP_CAPABLE ACK can carry a Data-Level Length, and an optional
Checksum: they are the same as the ones found in a DSS, because a DSS
cannot be used in parallel to an MP_CAPABLE. Similarly, even if there
is room, a DSS cannot be used with an MP_JOIN. |
| A heap-based buffer overflow vulnerability in Fireware OS's iked process allows an authenticated administrator to crash the IKE daemon (iked), resulting in a denial of service, by saving a specially crafted configuration. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to pass invalid log2 page size when allocating physical pages leading to OOB read and/or write due to improper validation of the said value.
Such crafted log2 page size could lead to 4K pages being treated as higher order pages and allowing read and/or write access to the memory beyond 4K threshold. |
| A flaw was found in CRI-O's container-creation environment-variable handling
(`mergeEnvs` in `server/utils.go`, consumed by `setupContainerEnvironmentAndWorkdir` in
`server/container_create.go`). When a `CreateContainer` request supplies a `nil` CRI
`Envs` field, CRI-O falls back to using the target OCI image's `config.Env` entries
unfiltered, in contrast to the normal merge path, which validates each entry for a
`key=value` form before use. An OCI image whose `config.Env` contains an entry with no
`=` character (e.g. a bare `NOEQUALS` string) causes CRI-O to split that entry into a
single-element slice and then index its second element, which is out of range. This
triggers an unrecovered Go runtime panic in the `crio` daemon process, crashing it and
terminating the container-runtime service for all workloads on the node until it is
restarted. |
| Multiple flaws have been identified in `named` related to the handling of DNS messages whose CLASS is not Internet (`IN`) — for example, `CHAOS` or `HESIOD`, or DNS messages that specify meta-classes (`ANY` or `NONE`) in the question section. Specially crafted requests reaching the affected code paths — recursion, dynamic updates (`UPDATE`), zone change notifications (`NOTIFY`), or processing of `IN`-specific record types in non-`IN` data — can cause assertion failures in `named`.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. |
| When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool. |
| url.Parse insufficiently validated the host/authority component and accepted some invalid URLs. |
