| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP options, such as a malicious root-path, next-server, or bootfile name, to a system using dracut's NetworkManager-based initrd network module. These options are improperly handled and written into a temporary shell script without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs during system boot. |
| A flaw was found in dracut. The die() error-handling function writes its message into a shell script under the initramfs emergency-hook directory without properly shell-quoting it. When the message contains data derived from the DHCP ROOT_PATH option, an attacker on the adjacent network who controls a rogue DHCP server can inject a command-substitution sequence that executes as root the next time dracut sources its emergency hook scripts during standard boot-failure handling. |
| A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP (Dynamic Host Configuration Protocol) options, such as a malicious hostname, to a system using dracut's legacy DHCP path. These options are improperly handled and written into temporary shell scripts without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs, potentially compromising the system's boot and network behavior. |
| A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks. |
| A flaw was found in gnutls. This vulnerability occurs because permitted name constraints were incorrectly ignored when previous Certificate Authorities (CAs) only had excluded name constraints. A remote attacker could exploit this to bypass critical name constraint checks during certificate validation. This bypass could lead to the acceptance of invalid certificates, potentially enabling spoofing or man-in-the-middle attacks against affected systems. |
| A flaw was found in libgnutls. A remote attacker, by sending an extremely short premaster secret during an RSA key exchange to a server using an RSA key backed by a PKCS#11 token, could trigger a short heap overread. This memory corruption vulnerability could lead to information disclosure. |
| A flaw was found in libsolv. This heap buffer overflow occurs during the decompression of attacker-controlled compressed data within `.solv` files due to insufficient input validation. An attacker can provide a specially crafted `.solv` file, which, when processed by a vulnerable application, can lead to out-of-bounds memory access. This could result in information disclosure, alteration of program execution, or a denial of service. |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| A flaw was found in libsolv, a dependency-resolution library used by RPM-based package managers such as dnf and zypper to work with .solv repository cache files. When libsolv rewrites a .solv cache file, it reads directory-id values from the file's compressed filelist data without validating that they fall within the expected range. A corrupted or specially crafted .solv cache file (for example, one left in a torn state after an unclean system shutdown) can cause an out-of-bounds memory write when a tool such as dnf, yum, or zypper next processes it. Successful exploitation is expected to result in a crash of the affected tool (denial of service); it is not expected to allow arbitrary code execution because the out-of-bounds write always stores a fixed, non-attacker-controlled value. |
| Impact:
undici's ProxyAgent silently drops the requestTls option when configured with a SOCKS5 proxy URI (socks5:// or socks://). The target HTTPS connection through the SOCKS5 tunnel falls back to Node's default trust store, ignoring user-configured ca, cert, key, rejectUnauthorized, and servername settings.
Applications that pin to an internal or corporate CA via requestTls.ca will, when their proxy URI is SOCKS5, get the default Mozilla CA bundle as the trust anchor instead. Any cert signed by any publicly-trusted CA for the target hostname is accepted, breaking the intended pin and enabling MITM read and tamper of the HTTPS exchange.
Affected applications are those that use undici's ProxyAgent (or Socks5ProxyAgent directly) with SOCKS5 AND rely on requestTls for TLS scope restriction. The bug was introduced in undici 7.23.0 when SOCKS5 support was added.
Patches:
Upgrade to undici v7.28.0 or v8.5.0.
Workarounds:
No workaround is available within the SOCKS5 path. If a SOCKS5 proxy with TLS scope restriction is required and an upgrade is not yet possible, route the traffic through an HTTP-proxy ProxyAgent instead, where requestTls is honored correctly. |
| Impact:
When using Socks5ProxyAgent, undici reuses a single connection pool across different origins without verifying that the pool's origin matches the requested origin. All requests are dispatched through the pool connected to the first origin, regardless of the intended destination.
This causes cross-origin request routing: credentials and request data intended for origin B are sent to origin A, responses from the wrong origin are trusted, and HTTPS requests may be silently downgraded to HTTP.
Impacted users are applications that use Socks5ProxyAgent (directly or via setGlobalDispatcher) and make requests to more than one origin.
This was introduced in undici 7.23.0 via PR #4385 and affects all versions through 8.1.0.
Patches:
Upgrade to undici v7.26.0 or v8.2.0.
Workarounds:
Use a separate Socks5ProxyAgent instance per origin, or avoid using Socks5ProxyAgent with multiple origins. |
| A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames. |
| A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory). |
| An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution. |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. |
| Multiple flaws have been identified in `named` related to the handling of DNS messages whose CLASS is not Internet (`IN`) — for example, `CHAOS` or `HESIOD`, or DNS messages that specify meta-classes (`ANY` or `NONE`) in the question section. Specially crafted requests reaching the affected code paths — recursion, dynamic updates (`UPDATE`), zone change notifications (`NOTIFY`), or processing of `IN`-specific record types in non-`IN` data — can cause assertion failures in `named`.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. |
| BIND servers that are configured to use TKEY-based authentication via GSS-API tokens are vulnerable to excessive memory consumption when receiving and processing maliciously-constructed packets. Typically these servers will be found in Active Directory integrated DNS deployments and/or Kerberos-secured DNS environments.
This issue affects BIND 9 versions 9.0.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.9.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. |
